Euros Crankcase Fuel Tank Engine Housing Cover Fit for 017 018 MS170 MS180 Chainsaw
- Package include:1Pc Crankcase Fuel Tank Housing.
- We provide 100% perfect customer service, please contact us freely if there’s any question.
ReviewsPlastic Housing Mold Manufacturer
Husqvarna 531009652 Leaf Blower Recoil Starter and Housing Assembly Genuine Original Equipment Manufacturer (OEM) Part
- Recoil starter and housing assembly 531009652 recoil starter spins the flywheel to start the engine and the housing holds the recoil starter on the engine.
- Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Husqvarna.
- This manufacturer-approved recoil starter and housing assembly (part number 531009652) is for leaf blowers.
- refer to your parts diagram for a complete list of parts included Let the engine cool before installing this part.
Lamp Replacement for SONY XL-2400 Projector with Housing
- No Risk. Long lasting bright premium quality original manufacturer bulb ensures 100% satisfaction.
- Easy installation, minimizes installation time to make sure your device is back in action!.
- Brand new high quality replacement bulb, brighter & sharper picture with plastic housing especially made to fit your projector/ TV.
- All Original Lamps are manufactured to ISO9001 standards and come complete with a comprehensive 180 day warranty and a 30 day refund warranty.
Honeywell 360 Surround Fan Forced Heater for Medium Room with Manual Controls, White
- This Certified Refurbished product is manufacturer refurbished it shows limited or no wear.
- Honeywell 360 Surround Heater Slate Gray.
- 360 degrees heat output | 2x overheat shut-off protection | Programmable thermostat | 1500 Watts.
- Easy grab handle | Cool touch plastic housing | Auto-off timer option | 360-degree tip-over protection.
Samsung Icemaker Assembly DA97-05554A DA9705554A
- Ice maker DA97-05554A is an original equipment manufacturer (OEM) part that fits some Samsung bottom-freezer refrigerator models in the RF26-, RFG23- and RFG29-series..
- Ice maker DA97-05554A includes the ice mold, motor and wire harness.This ice maker doesn’t include the housing with the ice level detecting arm.This part DA97-05554A is only the ice maker portion of Samsung complete ice maker assembly DA97-05422A..
- Ice maker DA97-05554A fits Samsung refrigerator models RF267AAWP/XAC, RF267ABBP/XAA, RF267ABBP/XAC, RF267ACRS/XAA, RF267ABPN/XAA, RF267ACWP/XAA, RF267ABRS/XAA, RF267ABRS/XAC, RF267AABP/XAA, RF267ABWP/XAA, RF267AABP/XAC, RF267AARS/XAA, RF267AARS/XAC, RF267AASH/XAA, RF267AAWP/XAA, RF267ABWP/XAC, RF267ACBP/XAA, RF267ACPN/XAA, RF26VABBP/XAA, RF26VABPN/XAA, RF26VABWP/XAA, RF26VACBP/XAA, RF26VACPN/XAA and RF26VACWP/XAA. It also fits Samsung models RFG297AARS/XAA, RFG297AARS/XAC, RFG297AAWP/XAA, RFG297AAWP/XAC, RFG295AAPN/XAA, RFG299AARS/XAA, RFG295AARS/XAA, RFG295AAWP/XAA, RFG297AABP/XAA, RFG297AABP/XAC, RFG297AAPN/XAA, RFG238AZRS/XAA and RFG295AABP/XAA..
3 Pack Combo Ice Tray Molds Silicone Trays Handheld Gun, Mustache and Hard Shell AK-47 Bullet Chocolate Candy Soap Mold
- Product Specifications – Three molds in one package, Silicone Mustache, Silicone Gun and Hard Plastic Bullet.
- Our molds are perfect for Homemade Chocolate, Gummies, hard candy and of course Ice Tray..
- Right Size Mold – Gun mold measures 8.8 x 4.7 x 0.45 inches. Mustache mold measures 5.75 x 4.8 x 0.6 inches. Hard Plastic Bullet Mold measures 8 x 3.5 x 0.5 inches. Quantity: 3 x Molds.
- Easy to Use – Pistol mold and Mustache mold are designed to bend and be flexible. With Super flexibility it allows you to pop out any finished product without any extra work. Bullet mold is hard plastic. Best way to fill it with water is to submerge it under water..
- DIY Treats – These molds can be used in many varieties from Homemade Candy, Cake topper, gummies, chocolate mold, ice cube tray, cake decorating, hard candy to much more. These molds are not oven safe..
- Easy To Clean – Our molds are easy to clean. These Molds are Refrigerator, Freezer and Dishwasher Safe. They are not oven safe.
- these molds Supports temperature from -40 to 100 Fahrenheit..
Cobblestone Walkway Maker Patio Garden Path Driveway Concrete Stepping Mold USA Black
- DIY making:With Path Maker Mold,you can build a new path in any direction in the park based on your personal idea, making a special and unique road in....
- Easy to use:The DIY Garden Cobblestone Mold is easy to use, just mix cement with sand and water, then fill the mold with mixed wet concrete, make the....
- Application:The Plastic Paving Mold is suitable for walkways, trails, terraces, picnic areas, designed for garden enthusiasts.
- Material:The Paving Mould made of environmental friendly plastic is durable, reusable,harmless, safe to use.
- Gift:The Plastic Concrete Mold is supposed to be a perfect present to your friends and families who are keen on DIY making.
Square Paving Mould Path Maker Mold DIY Garden Cobblestone Mold DIY Plastic Cobblestone Concrete Path Maker Mould for Landscape
- DIY making:With Path Maker Mold,you can build a new path in any direction in the park based on your personal idea, making a special and unique road in your garden.
- Easy to use:The DIY Garden Cobblestone Mold is easy to use, just mix cement with sand and water, then fill the mold with mixed wet concrete, make the surface smooth, and finally release the mold.
- Application:The Plastic Paving Mold is suitable for walkways, trails, terraces, picnic areas, designed for garden enthusiasts.
- Material:The Paving Mould made of environmental friendly plastic is durable, reusable,harmless, safe to use.
- Gift:The Plastic Concrete Mold is supposed to be a perfect present to your friends and families who are keen on DIY making.
BlueDri BD-BD-130-BL Industrial Commercial Dehumidifier with Hose for Basements in Homes and Job Sites, Blue
- From your basement to your attic or your bathroom to outside in your garage, our dehumidifier will help you restore your whole house.
- Dimensions – 20” L x 21” W x 32.5” H | Weight – 97 lbs. | Drain hose – 38 ft. | Pints per day – 225 | Max Air process – 410 CFM | Power cord length – 25 ft. | Voltage – 115V, 60 Hz | Water removal – 225 PPD/130PPD AHAM.
- This dehumidifier is packed with an automatic water pump, digital panel, compact electrical control with auto restart, hour counter, RH and temperature sensors, so you can get any job site done with just a few buttons.
- Ideal for water damage restoration projects, its high efficiency rotary compressor ensures the maximum moisture extraction, of up to 225 pints per day (105 PPD AHAM), removing up to double the water per day than normal 70 pt. capacity home dehumidifiers.
- The model number is indeed the BD-130P. The manufacturer uses model# BD-BD-130-BL for their internal purpose | Our product is designed with a heavy duty roto-mold technology that we with a 1-year and a 5-year housing.
G830 2.0 Gelcoat Spray Gun
- 【COMPOSITION STRUCTURE】1 x Spray Gun (gun trigger, air flow control valve, housing, spring hook).
- 1 x 4mm Spray Nozzle FN5 5/32" (with sealing ring).
- 2 x 1000ml Plastic Cup (with metal cup cover).
- 【MAIN PARAMETERS】Air source pressure: 0.3-0.6Mpa, Cup volume: 1L, Measuring Cup: 500ml, Spray Nozzle: (4mm) FN5 5/32", Nozzle outer diameter: 5.0, Nozzle inner diameter: 3.0, Package size: 23cm x 23cm x 17cm (9'' x 9'' x 6''), Shipping weight: 1.4kg/3lbs..
- 【OPERATION METHOD】According to the viscosity of the gel coat, choose the nozzle with the right diameter. In the nozzle and jet, the gun and the gun body and the lid and the material apply grease to the joints such as the cup. Then cover the cup on the cup filled with the material and press the lid.
- Force the nozzleinto the air vent in front of the gun until the nozzle shows the air vent.
- Hold thehandle and hold the gun. The air is ejected from the air jet..
- 【WIDE APPLICATION】This gun will spray faster than conventional HVLP guns and will clean up in just a few minutes.This gun is used for spraying not only gelcoat, but other materials such as parting films, spray gypsum, tooling gelcoats, sandable primers, granite enhanced gelcoats, adhesives and paints..
Spiral Shape Cylinder Candle Mold, 1.35''x6.04''Inch Durable Plastic Candle Mold Supplies for Wedding Dinner Candles Making
- High Grade Plastic Material: Plastic candle mold is made of extremely durable plastic which will last a lifetime and can withstand frequent usage due to its resistance to high and low temperatures..
- Candle Mold Size : 1.35''*6.04''Inch/3.45*15.35cm, Make your own candle for any occasions - from decorating your dinner table to a wedding..
- Spiral Shape Cylinder Ｍold: Resistant heat material and high transparent, excellent in allowing the colors of your dyed wax to be seen..
- How to Take It Out: Tips 1: Notice: after filled the candle mold and wait it to harded, make the molds Freezing at -4℉ in the refrigerator for 15 minutes, It will be easier removal of the contents once it has set. Tips 2: Before pouring the beeswax into the mold, coated the inside of the mold with a thin layer of coconut oil..
- Wide Application: This mold can be used for paraffin, wax, Palm Wax, beeswax candle making.
- Any wax works in this amazingly easy mold..