ReviewsPlastic Injection Mold Molding

Bosworth 0921092 Trim II Powder, Shade B1, 1.5 oz Capacity

♥Notice:It must be used with a Dental Injection Molding Machine,needs to be heated to a temperature of 287±10°C. (about 550°F) and then injected into your dental mold.If you don't have the injjection machine with high temperature,not recommend this,please.
♥Melting time:11-15min.10 cans(About 9g/can).Without Blood Streak..
♥High translucent close to color of gums.Color is effected by the the heating time..
♥Polish easily because of smooth surface..

Check Stock

Yinpecly 30mm OD 15mm ID 40mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Yellow Tone 2pcs

【SIZE】- Hole Diameter (Outer Diameter): 30mm/1.18".
Inner Diameter (Tolerance +1mm/-0.5mm): 15mm/0.59".
【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
They have the characteristics of small size and high precision.
【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
【PACKAGE CONTENT】- Package Content: 2pcs x Compression Mould Die Spring.

Check Stock

Yinpecly 12mm OD 6mm ID 30mm Long Spiral Stamping Middle Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Red Tone 10pcs

【SIZE】- Hole Diameter (Outer Diameter): 12mm/0.47".
Inner Diameter (Tolerance +1mm/-0.5mm): 6mm/0.24".
【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
They have the characteristics of small size and high precision.
【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.

Check Stock

Yinpecly 20mm OD 10mm ID 30mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Blue Tone 10pcs

【SIZE】- Hole Diameter (Outer Diameter): 20mm/0.79".
Inner Diameter (Tolerance +1mm/-0.5mm): 10mm/0.39".
【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
They have the characteristics of small size and high precision.
【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.

Check Stock

Green with Black Complete Fairing Bodywork Painted ABS Plastic Injection Molding Kit for 2013-2016 13-16 Kawasaki Ninja 300 EX300R EX 300R EX-300R EX300A EX300B SE 2014 2015

????Condition:Aftermarket 100% Brand new.
????Color: Green w/ Black (our main gallery is for references only. Please check our disassembled fairing picture for the actual item).
????Material: ABS Plastic (Made by injection molding.
Injection molding: correct tabs and pre-drilled hoes, Precision fitment like OEM.
????High quality paint job, Custom Painted with 2-3 Clear costing.
Strong, durable and flexible ABS plastic.
????Fitment: 2013-2016 Kawasaki Ninja 300 / EX300R (Free free to contact us for custom painting or order individual pieces. ).
????Quantity: This is a 17 pieces complete set as a picture showed. (Comes with a free smoke windscreen and heat shield as a gift.).

Check Stock

HYUNDAI MICRO PCR 8-Strip Tube Attached Flat Cap 0.2mL Clear HBP002CF8D

0.2ml PCR thin-walled octuple, suitable for fluorescent quantitative PCR instrument and ordinary PCR instrument of mainstream brands in the market.
It is made of precision mold and injection molding, with good finish, high light transmittance and evaporation rate less than 5%, saving reagent cost.
Material: polypropylene (PP), non sterile and autoclaved.
No NDA enzyme, no RNA enzyme, no heat source.
Purpose: during PCR experiment, it is used for sample storage and reaction.

Check Stock

ZL-166 Handheld GPS Navigation Track Land Area Measure Calculation Meter TFT 2.4in Display Measuring Tool 100-240V

LED BACKLIGHT DISPLAY: Handheld GPS navigator has high definition LED backlight display, with laser module, can easily measure and read even in dark environment.
COMFORTABLE GRIP: Land area measurer adopts insulating rubber, cushioning and anti-skid, double-layer protection, the design conforms to ergonomics, comfortable grip, and more convenient measurement.
HIGH ACCURACY: Land navigation land area meter equipped for u-blox chip, with GPS positioning system, accurate measurement, small error, supports data export function, with voice broadcast, without looking at the screen to know the measurement results.
WATERPROOF: GPS land area meter has good waterproof and dustproof performance, IP class waterproof, easy to use even in harsh working environment, no need to worry about water and dust problems.
GOOD DURABILITY: GPS navigator adopts two color mold is one-piece molding, sturdy and durable, double injection molding shell, made of high-quality ABS material, corrosion-resistant and wear-resistant.

Check Stock

2xhome Set of Two (2) Clear - Louis Style Ghost Armchair Dining Room Chair - Lounge Arm Arms Armed Chairs Armchairs Accent Seat Higher Fine Modern Mid Century Designer

Due to the glossy finish the clear chair, you will notice some swirls. Single injection molding will have molding line and injection point at some spots. They are not defected. Also blue/purple hue appears on the chair but will fade out over time..
Made from heavy-duty molded contemporary polycarbonate plastic - Suitable for both indoor & outdoor use - Stackable chair for easy storage.
Comfortable Chair - Great for both Home & Office use - Dining Rooms, Living Rooms, Family Rooms, Bedrooms, Nurseries, Offices, Waiting Areas, Parties, Banquets, Patios, Porch, Balconies, and many more!.

Check Stock

FZ-9 LOT + BAT F0+ Meca Trong Batwing Fairing Windshield for Suzuki VL1500LC Intruder 1998-2004 Primer Single Din

Easy to install and no install instructions,Mounting hardware are not included..
Made from thick raw ABS injection-molded plastic, it comes with a nice smooth surface straight from the injection molding machine..
Material:100% made of high quality ABS plastic (Not PVC) to guarantee a longer life time and product durability.
Fits For '14-later Electra Glide, Street Glide, Ultra Limited and Tri Glide models..
Package Included: 1x Outer Fairing with Vent Accent (As Picture Shown).

Check Stock

FROG Chocolate Candy Mold With Molds and Things candy making instruction

Includes FREE Exclusive Molds and Things Chocolate Molding Instructions.
Discounted shipping rate applies on 2nd mold and more..
FROG Chocolate Candy Mold cavity size 1 3/4 X 3 7/8.
Molds are PETG Clear Plastic mold Can be used for Chocolate, soap, plaster. It is durable and reusable. Cannot be washed in dishwasher. Not for use with hard candy. lollipop sticks are Not for oven use. Background Color is only for Demonstration purpose, The item is shipped in envelop..

Check Stock

CHERRY BON-BON Chocolate Candy Mold With Molding Instruction -set of 3

Includes FREE Exclusive Molds and Things Copyrighted Chocolate Molding Instructions.
Dimention of the mold: 1 3/8 DIA 1""DEEP.
Discounted shipping rate applies on second mold and more..
Molds are PETG Clear Plastic mold Can be used for Chocolate, soap, plaster. It is durable and reusable. Cannot be washed in dishwasher. Not for use with hard candy. lollipop sticks are Not for oven use. Background Color is only for Demonstration purpose, The item is shipped in envelop..

Check Stock