ReviewsPlastic Machinery For Pipes

50PCS 11.8Inch Metal Cable Zip Ties - 304 stainless steel Heavy Duty Self-locking Cable Wire Tie Wrap for Fence Exhaust Wrapping Car Outdoor Canopy Automotive

  • ...n resistance, fire resistance and longer service life, it can be used in various environments, such as humid places, outdoors, high temperature places, etc..
  • 【Wide Application】Wide Application Our Metal cable zip ties are ideal for ship, mine, electricity, automotive parts, computer wire harness, home repair and machinery, vehicles, gardens, farms, cables, pipes, roofs, basements. For example, you could use these on a chain link fence as a tie for securing the fabric to the posts,which are much stronger than the plastic harness.
Check Stock

ANLEY 5" X 3" Diesel Only Decal 3Pcs - Reflective Diesel Only Sign on Fuel Tank Signage to Prevent User Error - Adhesive Fuel Stickers for Trucks, Tractors, Machinery - 3 Pack Set

  • CONCISE AND CLEAR | Two words: "Diesel Only." People aren't going to argue with you. No gray area here. People can take their gasoline elsewhere—this machine runs on heavy fuel..
  • BRIGHT AND VISIBLE | To prevent issues or spills, people have to see the sign before they start refueling. The bright white contrast lettering on a green background helps this sign stand out and get noticed..
  • AVOIDS CONFUSION | Mixing fuels can be costly or even dangerous. Make sure gasoline engines get gas and diesel engines get diesel by using appropriate signage in your fueling station and on your heavy machinery..
  • FLEXIBLE STICKER | Trucks, fuel tanks, pipes, and barrels all have curved surfaces that a rigid plastic sign can't conform to. These stickers adhere firmly to metal, plastic, and glass surfaces..
Check Stock

Pneumatic Tapping Machine DEJUN 360° Multi-directions Pneumatic Air Tapper Universal Flexible Arm Drilling Threading Machine M3-M12 Tap Collets with Taps

  • Premium Quality - the pneumatic tapping machine, not electric but only air powered, adopts high strength, aluminum alloy, strong hardness, high efficiency, stable performance, simplified operation..
  • Overload Protection - our pneumatic air tapper has the clamping cylinder with overload protection device, when the tapping torque exceeds the rated torque, the adjustable safety clutch is separated to avoid tap damage..
  • High Configuration - strong power pneumatic motor, 400rpm/min.
  • oil-water separator separates the oil and water from the air to ensure the normal operation.
  • the folding arm can rotate 360°on the workbench and tap vertically, 1000mm working radius..
  • Applicable Fields - suitable for all machinery manufacturing industries, mold/plastic/printing machinery, packaging machinery factories, engineering machinery, automobile and motorcycle parts, aviation engines, rolling stock and other general machinery industries..
  • Applicable Materials - can be used for copper, iron, aluminum, steel, stainless steel, plastic, wood and other materials..
Check Stock

uxcell 5/8-11 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • ... steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead....
Check Stock

uxcell 5/8-24 UNEF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • ... steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead....
Check Stock

uxcell 5/8-18 UNF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • ... steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead....
Check Stock

uxcell 3/8-16 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • ... steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead....
Check Stock

uxcell 1/2-20 UNF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • ... torque, good toughness and wear-resistance for long service life..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead....
Check Stock

Klein Tools 935DAG Digital Electronic Level and Angle Gauge, Measures 0 - 90 and 0 - 180 Degree Ranges, Measures and Sets Angles

  • This Digital Angle Gauge and Level can measure or set angles, check relative angles with zero calibration feature, or can be used as a digital level.
  • High visibility reverse contrast display improves visibility in dimly lit work environments.
  • Strong magnetic base to attaches to conduit, pipes, saw blades, vents, ducts, and other ferromagnetic surfaces.
  • V-groove edges enable optimal alignment on conduits and pipes for bending and alignment.
  • 0 to 90-Degree and 0 to 180-Degree measurement ranges provide easy use in applications such as woodworking, bending conduit, installing electrical panels, and working on machinery.
  • 0 to 180-Degree range is useful when accounting for kickback in pipe bending applications when bending to 90-Degree or more.
  • Display auto-rotates when upside-down for easy viewing.
Check Stock

uxcell M6 X 1.0 Metric Round Die, Machine Thread Left Hand Threading Die, Alloy Steel

  • ... steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead....
Check Stock

1/4 OD 1/8 ID High Temp Pure Slicone Tubing Food Grade Hose Silicone Platinum Vulcanization Process For Home Brewing Winemaking 6.4mm OD 3.2MM ID Hardness 60A 10 Feet Clear Silicone Tube

  • It can be used as a conduit for connecting pipes for medical equipment high temp silicone tubing.
  • raw material food-grade silicone is environmentally friendly.
  • silicone, non-toxic, tasteless and harmless, silicone hose brewing.
  • used as food pipe products, connecting pipes for food machinery, drinking fountains, coffee pots, etc high temp tube silicone hose for vape.
  • casings for electrical instruments ,silicone high temp tubing.
Check Stock