ReviewsPlastic Pipe Extruder

Upgrade 3D Printer Accessories with All Metal Extruder Feeder, Capricorn Bowden Tubing, Pneumatic Couplers, Bed-Level Springs for Creality Ender 3/Ender 3 Pro/Ender 5 Pro/Ender 5 Plus Ender 3 Upgrades

  • 3D Printer Extruder – Instantly provide improved print quality and reduce filament slipping by firmly grasping the filament between two threaded wheels locked together. No more skipped steps when extruding at high speeds or after retractions. Print faster with this superior design, which is able to feed much more filament into the hotend in the same period of time than stock plastic extruders..
  • 100% Original Capricorn XS Bowden Tube for 1.75mm filament – Capricorn ptfe tube is regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. It is rated for withstanding the highest temperature in the market which is perfect for printing filaments such as PLA, PETG, ABS, Nylon. Fits for 1.75mm 3d printer Filament..
  • Creality Die Springs – Those springs are extra firm and help to hold the bed level for longer while being more resistant against wearing out and loosing compression. Level the bed once and it should hold for more prints with these high performance stiff springs. PC4-M6 & PC4-M10 pneumatic fittings are also included for replacement use on any stock creality hotends..
Check Stock

Swpeet 36Pcs Rose Red Clay Extruder Gun Fondant Sugar Paste Extruder Clay Cake Sculpture Gun Ball Stylus Dotting Tool with Plastic Scraper Cake Decorating Supplies Modeling Tool

  • ❤ What You Get ----- In this kit, You will get 36Pcs Modeling Tool Kit, Including 1Pcs Rose Red Clay Extruder Gun with 20Pcs Extrusion Discs, 4Pcs....
  • ❤ With 4Pcs Plastic Modeling Tools ----- Suitable for making dots, smooth lines in clay, sculpture, make paper flowers or embossing on soft paper,....
  • ❤ 8Pcs Plastic Crafts Clay Modeling Tool ----- Clay extruder and ball stylus dotting tool is made of high quality stainless steel, no any harmful....
  • ❤ High Quality Clay Cake Sculpture Gun Tool ----- Color: Green. Material: Aluminium alloy. Size: Length: 6.5 inch / 16.5 cm, Width: 3.9 inch / 10 cm....
  • ❤ Plastic Scraper ----- Use high quality plastic material, wear-resistant, tough, with it can better assist your clay engineering. These are made of....
Check Stock

33Pcs Clay Extruder Gun Soft Sugar Syrup Extruder Clay Cake Sculpture Gun Cake Decoration Modeling Tool with 4 Metal Ball Needle Dispensing Tools and 8 Plastic Craft Clay Model Tools

  • ❤ What You Get ----- In this kit, You will get 36Pcs Modeling Tool Kit, Including 1Pcs Clay Extruder Gun with 20Pcs Extrusion Discs, 4Pcs Ball....
  • ❤ With 4Pcs Plastic Modeling Tools ----- Suitable for making dots, smooth lines in clay, sculpture, make paper flowers or embossing on soft paper,....
  • ❤ 8Pcs Plastic Crafts Clay Modeling Tool ----- Clay extruder and ball stylus dotting tool is made of high quality stainless steel, no any harmful....
  • ❤ High Quality Clay Cake Sculpture Gun Tool ----- Color: Green. Material: Aluminium alloy. Size: Length: 6.5 inch / 16.5 cm, Width: 3.9 inch / 10 cm....
  • ❤ Plastic Scraper ----- Use high quality plastic material, wear-resistant, tough, with it can better assist your clay engineering. These are made of....
Check Stock

Creality Ender 3 Direct Drive Upgrade Kit, Ender 3 Pro/Ender 3 V2 Direct Drive Extruder with 42-40 Stepper Motor, Hot End Kit, Fan and Cables, Support BL Touch

  • Upgraded 3d printer extruder for Ender 3, Ender 3 Pro and Ender 3 V2 3D Printer. Customer Services: If you have any question or need technical support about the product, Please press "Ask a question" through our storefront's page, report an issue through the ”Your Orders“page. We will respond with 24 hours..
  • Support all 1.75mm diameter filament in the market, offers more precise and smoother extrusion..
  • Perfect for PLA and optimize the performance of remote printing with TPU and other flexible filaments..
  • Comes with 42-40 stepper motor. This direct extruder kit is made of aluminum alloy and plastic, durable and wear resistant..
  • With longer Extruder motor connecting cable, tools, accessories and wiring diagram instruction for installation, easy to assemble..
Check Stock

Bigtreetech 3D Printer Upgrade Dual Gear Extruder MK8 extruder Dual Driver Feed Metal Feeder extruder kit CR-10S Pro/CR-10/ Ender 3 V2/Ender3/Ender 3 pro 1.75mm Filament

  • ❤【UPGRADE DAUL GEARS】Double-gear and double-pneumatic joint extrusion structure, direct drive extruder, high extrusion force, enhancing the feed....
  • ❤【COMPATIBILITY】Double gear mk8 extruder，Perfect replacement for 3D Printers CR-10/ CR-10S/ CR-10S Pro/ Ender 3（initial version）/Ender 3....
  • ❤【STABLE AND DURABLE】All-metal aluminum alloy, High quality dual gear extrusion, Compare to the normal plastic drive, this high aluminum metal....
  • ❤【IMPORTED MATERIAL】The dual gear extruder material adopts brand-new imported aviation aluminum material, and is processed by CNC imported from....
  • ❤【24 months Longer warranty 】We will provide a long-term warranty service of up to 24 months. We will respond promptly within 12 hours in one....
Check Stock

Bowden Extruder V2.1 RNC Nano Coated Gear DDB Universal Geared Extruder for 3D Printer

  • Kit includes: 1pc Universal Geared Extruder w/ RNC Nano Coated Gear, 1pc Screws package, 1pc Installation tools package, 1pc Stepper motor mounting bracket.
  • Upgraded High performance extruder for 3D Printer.
  • Upgrade Highlights: 1. The position of the gears and the accuracy of all screw holes are calibrated. 2. Modified the new buckle, both sides of the V2.1 version of the DDB extruder support filament running thru in and out (it has no specified direction, and you are able to use either side of the material ports).
  • 3. The filament has an independent motion cabin inside the extruder. The new white filament guide inside the extruder is helping the filament running smoothly. 4. The new outer shell design with edge cut on the top of the extruder is reserved for the screw rod of Ender 3 printer. 5. Upgraded shell using new mixed materials.
  • ***Please make sure Gears are Installed and Precisely Aligned before printing, they will perform successfully.
Check Stock

Creality Upgrade 3D Printer Kit with All Metal MK-8 Extruder 4 PCS Red Hand Twist Leveling Nuts and 4 PCS Bed-Level Springs 0.04 mm Printer Nozzles for Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5

  • ❤【UPGRADE DAUL GEARS】Double-gear and double-pneumatic joint extrusion structure, direct drive extruder, high extrusion force, enhancing the feed....
  • ❤【COMPATIBILITY】Double gear mk8 extruder，Perfect replacement for 3D Printers CR-10/ CR-10S/ CR-10S Pro/ Ender 3（initial version）/Ender 3....
  • ❤【STABLE AND DURABLE】All-metal aluminum alloy, High quality dual gear extrusion, Compare to the normal plastic drive, this high aluminum metal....
  • ❤【IMPORTED MATERIAL】The dual gear extruder material adopts brand-new imported aviation aluminum material, and is processed by CNC imported from....
  • ❤【24 months Longer warranty 】We will provide a long-term warranty service of up to 24 months. We will respond promptly within 12 hours in one....
Check Stock

Official 3D Printer Extruder Upgraded Aluminum Drive Feed Extruders Accessories for 3D Printer 1.75mm Filament Works with Creality CR-10 Series Ender 5 Series Ender 3 Series

  • ✔️Durable Material -- High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term....
  • ✔️New Upgraded Design -- The upgraded red extruder has removed pneumatic joint so as to increase gear density, preventing the joint fracture....
  • ✔️Improved Performance -- The optimized extruder with metal extrusion and original hot-end kit pushes the filament into printer nozzle, greatly....
  • ✔️Install Easily -- You just remove the old Creality extruder & screw and then install the new red extruder. All the necessary accessories are....
  • ✔️Wide Compatibility -- Red extruder is suitable for Creality 3d printers accessories: Ender-3 series, Ender-5 series, CR-10S, CR-10, CR-10mini,....
Check Stock

Haldis 3D Dual Drive Gear Extruder for 3D Printer MK8 V6 CR10 1.75mm TPU/TPE Flexible Filament Without Motor (DDB Left)

  • 1.【Transparent Design】: Transparent and cool design, double gear extruder, when working, you can watch the printing filament go through to see how it works. The transparent case is very practical and looks beautiful..
  • 2.【Dual Gear Extrusion】: Two stainless steel wheels grab the filament from both sides, high extrusion force, ensure smooth feeding and provide fast retraction, after a lot of trial and error improvements, we successfully improved the gear bite problem, improved The durability and reliability of the gears reduce the consumption of our gears and extend their service life..
  • 3.【Adjustable Pressure Spring】: Easily adjust the clamping force of the filament, improved adjustment thumb screw, more comfortable adjustment and more convenient to use..
  • 4.【High Quality Material】: Transparent hard plastic shell and high quality metal extrusion wheel parts, the transparent material looks very beautiful and beautiful. Lightweight: only 70 grams. It reduces the stress on the printer and is extremely easy to assemble..
  • 5.【Widely Compatible】: Compatible with most DIY ....
Check Stock

5Aplusreprap Upgraded Dual Gear Extruder Single Connector for Creality Ender 3 CR10 / Pro CR-10S 3D Printer 1.75mm Filament (2 x Extra Gears), Right Hand

  • Package Include: Single connector upgraded dual gear extruder right-handed 1 Set - extruder aluminum block DIY kit with 4pcs quality stainless steel gears.
  • Main Material Instruction: Material for extruder: Aluminum Alloy . Material for the gear in extruder kit : Stainless Steel. For filament: 1.75mm.
  • Advantages: This is an upgraded version of CR10 extruder. A newly added extrusion wheel makes the filament feed more stable. The design of the double-concave gear also reduces the embossing of the consumables by the extrusion wheel..
  • Features: The mould steel spring is very rigid, strong in pressure and very durable..
  • Tips: For most Ender/CR Series 3D Printers, please choose the right-handed extruder..
Check Stock

TRONXY Original Extruder Assembled MK8 Hotend Kit for 3D Printer with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle，Bowden Extruder kit

  • 100% TRONXY Orginal MK8 Full Set Hotend Kit.
  • Suitable For TRONXY XY-3 Seriers 3D Printer.
  • Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon).
  • MK8 Extruder Hot End Kit With thermistor 100K and Heater 24V 50W.
  • Thermistor and heater cable length: 1.2 m ,Feed tube:50cm.
Check Stock