ReviewsPlastic Radiator Sleak

FEXON Fan Clutch Nut Wrench Compatible with BMW E34 E46 E90 E39 E36 Clutch Removal Tool Kit Replaces 70074 Fan Clutch Wrench Set 32mm

  • ...ter in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
  • Specification: The radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21.2" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly..
  • Easy To Use: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that the leakage might occur in radiator. Please inspect the radiator system and repair it if necessary. Normally, it takes around 10mins to test leak, very easy and fast to operate..
  • Wide Application: Coolant system leak checker tool set is equipped with 12 specific aluminum adapters, solid and durable, widely compatible for Cadillac, B....
Check Stock

DASBET 18PCS Radiator Pressure Leakage Tester Tool Kit, Automotive Cooling System Water Tank Leak Test Detector Set with Hand Pump and Nylon Adapters

  • Hand Pump Leak Detector: The radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21.2" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly..
  • Leak Detection Tool: The hand pump leak detection tool pressurize on the reservoir, and watch for pointer drop over time to confirm system leak down. If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
  • Easy To Use: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that the leakage might o....
Check Stock

JIFETOR Radiator Coolant Pressure Tester Vacuum Refill Tool Kit, 28PCS Automotive Cooling System Leak Test and Pneumatic Purge Fill Set with Testing Adapter Caps Universal for Airlift Car Auto Truck

  • MULTIFUNCTION: JIFETOR all in one comprehensive coolant pressure tester fill kit includes leak detection, temperature measurement and coolant filling functions. Radiator pressure tester pressurize on the reservoir/cap, and watch for pointer drop over time to confirm system leak down. Coolant vacuum refill tool uses vacuum pump to extract air and form a vacuum to draw coolant into the cooling system. Add coolant in vacuum, there is no large air pocket and avoid warping or other damage in engine..
  • WIDE USAGE: Cooling system pressure tester and coolant bleeder kit is equipped with 17 specific adapters and 1 universal tapered rubber adapter, suits for almost all types of radiator openings on classic and modern vehicles. Included 3 radiator cap test adapters and 2 connectors help to diagnose the leakage of radiator caps on most cars. All these adapters are color coded and placed exclusively, can be easily selected according to the marked pictures in instruction, convenient and no confusion..
  • COOLING SYSTEM VACUUM FILL TOOL: Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosion and durable. The index range of gauge is -30 to 0inHg (-76 to 0cmHg), and normally -25 to -20inHg is right time to add coolant. 18" rubber resin ma....
Check Stock

YSTOOL Radiator Pressure Tester Coolant Vacuum Refill Kit 28PCS Automotive Cooling System Leak Test Pneumatic Water Tank Purge Fill Tool Set with Gauge Adapter Cap Universal for Auto Car Airlift

  • Three-in-one cooling system tool kit has 3 excellent functions: coolant pressure tester, coolant refilling & temperature measurement. Manual pump cooling system pressure tester can diagnose whether the radiator is leaking and help quickly bleed the waste coolant if needed. Pneumatic vacuum fill coolant tool vacuumizes to eliminate trapped air in minutes and refills cooling system with no air bubbles produced. Thermometer checks if the coolant temperature is too high. Fit for home & business.
  • 28PCS universal radiator tester pressure leak test set includes 17 color-coded radiator test adapter caps and a universal rubber cone adapter for almost all radiator openings on most vehicles at home and abroad. Another 3 radiator cap adapters and 2 connectors for radiator cap leak detection. All are well positioned in the case, complete in specifications and easy to assemble. Widely compatible with GM, BMW, VW, GMC, Porsche, Chevy, Dodge, JEEP, Chrysler and many other model car, truck & airlift.
  • Radiator manual pump pressure detector adopts premium aluminum cylinder and accurate shock-proof gauge design (3'' color-coded dial, 0-35PSI/ 0-2.5bar). Vacuum type coolant refiller takes reliable brass and plastic material. 21" & 18'' rubber hose with brass parts, anti-co....
Check Stock

Prime Choice Auto Parts RK1036 New Complete Aluminum Radiator

  • Drop in – Direct fit for easy installation.
  • Built to vehicle specific design specifications.
  • Complete Aluminum Radiator Core with Plastic Tanks.
Check Stock

DNA Motoring OEM-RF-0211 VW3115103 Factory Style Radiator Cooling Fan Assembly Replacement,Black

  • 【Fitment】Compatible with TT 2000-2004.
  • Compatible with Volkswagen Golf 1999-2006 / Jetta 1999-2005 1.8L 1.9L TDI, 2.0L 2.8L.
  • 【Design】Long Lasting Performance Sealed Motor, High Quality ABS Plastic Housing OEM Factory Style Radiator Cooling Fan Design for Direct Replacement with the Original Part.
  • 【Function】 Continuously Improves the Cooling efficiency, Set the Performance of Your Vehicle to a Higher Level.
  • 【This Item Includes】1 X Radiator Cooling Fan Assembly with Sealed Motor and High Quality ABS Plastic Housing.
  • 【Note】Professional Installation is Highly Recommended.
  • Installation Instruction is NOT Included.
Check Stock

DNA Motoring OEM-RF-0278 Factory Style Radiator Cooling Fan Shroud Cooling Efficiency Improved Direct Replacement [Compatible with Toyota Pickup 1989-1995]

  • 【Fitment】Compatible with Toyota Pickup 1989-1995.
  • 【Design】High Quality ABS Plastic Housing OEM Factory Style Radiator Cooling Fan Shroud Design for Direct Replacement with the Original Part.
  • 【Function】 Continuously Improves the Cooling efficiency, Set the Performance of Your Vehicle to a Higher Level.
  • 【This Item Includes】1 X Radiator Cooling Fan Shroud with High Quality ABS Plastic Housing.
  • 【Note】Professional Installation is Highly Recommended.
  • Installation Instruction is NOT Included.
Check Stock

TEMPCO Finned Strip Heater, Each End, 1200°F, 120VAC, Watts 900, Overall Length 12'

  • Brand-new radiator engineered and manufactured to meet OEM specifications for easy installation. Direct fit and built to last long with high quality aluminum core and plastic tanks preventing corrosion.
  • 100% Leak Tested backed by a 6-month warranty. Package includes 1 complete radiator. No radiator cap or sensor included.
  • OE / Interchange: CU2370. Core Thickness is 1" and Core Dimensions are 34-1/16" H x 17-1/4" W.
  • Replacement for 2002-2014 Cadillac Escalade 2000-2014 Chevrolet Tahoe Suburban GMC Yukon XL 1500 2007-2013 Avalanche 2002-2006 Avalanche 1500 1999-2013 Silverado Sierra 1500 Silverado 1999-2004 2500 2001-2006 3500 2001-2010 Silverado Sierra 2500 HD 2007-2010 3500 HD 4.3L 4.8L 5.3L 6.0L 6.2L 6.5L.
  • Please use Amazon's vehicle fitment tool (located at the top of the listing on desktop, below the images on mobile) to confirm that the part is correct for your vehicle application.
Check Stock

JIFETOR Cooling System Vacuum Purge Radiator Coolant Refill Tool Kit, Universal Automotive Water Tank Pneumatic Vacuum Antifreeze Change Filler Set, with Adapter Case Hose for Car Van SUV Truck

  • MULTIFUNCTION: The set is a all in one comprehensive radiator tool kit, includes leak detection, temperature measurement and coolant filling functions. The hand pump tester pressurize on the reservoir/cap, and watch for pointer drop over time to confirm system leak down. Pneumatic vacuum filler first sucks and forms a vacuum on the cooling system by using shop air, then draws coolant into system. Add coolant in vacuum, there is no large air pocket and avoid warping or other damage in engine..
  • WIDE USAGE: Coolant system leak checker and filling tool set is equipped with 17 specific adapters and 1 universal tapered rubber adapter, suitable for almost all types of radiator openings on classic and modern vehicles. Included 3 radiator cap test adapters and 2 connectors help to diagnose the leakage of radiator caps on most cars. All these adapters are color coded and placed exclusively, can be easily selected according to the marked pictures in instruction, convenient and no confusion..
  • WATER TANK COOLANT VACUUM REFILLER: Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosion and durable. The index range of gauge is -30 to 0inHg (-76 to 0cmHg), and normally -25 to -20inHg is right time to add coolant. 18" rubber resin mater....
Check Stock

JIFETOR Radiator Pressure Leakage Tester Tool Kit, 14PCS Automotive Cooling System Water Tank Leak Test Detector Set with Aluminum Hand Pump and Adapters

  • ...bishl, Nissan, Mazda, Toyota, Infiniti, Volvo, Saab and so on. All these adapters are color coded, number marked and placed exclusively, can be easily selected according to the marked number in instruction, convenient and no confusion. Check if the adapter caps are suitable when get the kit.
  • HAND PUMP LEAK DETECTOR: Radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly. The flat operation handle design is more convenient for palm to force..
  • EASY TO OPERATE: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that there isleakage might occur in radiator. Please inspect the radiator system and repair it if necessary. Normally, it takes around 10mins to test leak, very easy and fast to operate..
  • SATISFACTORY CUSTOMER SERVICE: The included stainless steel thermometer with i....
Check Stock

Radiator Pressure Tester Vacuum Refill Tool Kit - 28PCS Coolant System Leak Tester and Pneumatic Purge Fill Set with Adapter Refill for Vehicle

  • ...ly fills coolant and eliminates air pockets under vacuum to avoid engine distortion or other damaged.Thermometer to check if coolant temperature is too high.All in 1,more choices!.
  • 【Wide Applications】Cooling system pressure tester is equipped with 17 specific adapters and 1 universal tapered rubber adapter and 3 radiator cap test adapters and 2 connectors, compatible with most of domestic & imported vehicles and works on 99% of the coolant systems.Color code radiator tests caps make it easy to choose the suitable tests cap for the job of messy.A fascinating gift for car lovers and a useful set of tools for families..
  • 【Value for Money】Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosive and wearproof. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe, and normally -25 to -20inHg is right time to add coolant. 24" rubber resin material weave reinforced hose, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing.Stainless steel thermometer with index ranged 32 to 400℉..
  • 【Easy to Operate】--Connect the correct adapter cap to the radiator coolant pressure test manual air pump, pressurize the cooling system, and observe the....
Check Stock