ReviewsPlastic Strip Collated Screws

B&C Eagle CS8X134YZ No 2 Square Drive 1000-Count 8 by 1-3/4-Inch Yellow Zinc Collated Subfloor Screws

Drywall screw gun has a tool-free screw length adjustment button (1-inch - 2-inch capacity).
DEWALT drywall screw gun has disassembly release button (for occasional blow-out/cleaning).
The drywall gun has screw length detent marks and screw drive depth gauge.

SIDING NAILER: Accepts 16º wire collated coil siding nails from 1-1/2" - 2-1/2". Also accepts 15º plastic collated coil siding nails from 1-1/2" - 2-1/4".
SELECTIVE ACTUATION: Switch between sequential or contact nailing with the simple flip of a switch.
EASY LOAD: Side load, tilt bottom magazine for fast and easy reloads.
LIGHTWEIGHT: 40% lighter than PVC and is spiral reinforced for increased durability.
STRENGTH: Handles 300 PSI with a 3-to-1 burst ratio.

Widely applied: these one side strip light clips are designed for screwing LED light strips into wood materials such as cabinet, wardrobe, bookcase.
Ideal for 3258 / 5050 LED non-waterproof strip lights within 10 mm width.
Quality material: our LED light strip mounting bracket fixing clips are made of durable plastic with high temperature resistance, fire-resistant and flame-retardant, which can be applied to -30 ~ 90 ℃ working temperature, and can be stored at room temperature for at least 10 years.
Convenient to use: these one side fixing clips with screws are easy to use, no need to remove the screw to repair and replace the lamp belt, just fix it on the surface, then you can take down the LED strip light from the other end when replace or maintain it.
Recommended to use 3-6 pieces clips for 1 meter strip light.
Smart and artistic: the one side fixing clips come with compact size are good for fixing strip lights on spare place of PCB, without affecting LED's illumination, what's more, after using this product, your LED light strip will be stronger and will not fall easily.
Package includes: you will receive 200 pieces of LED light strip mounting bracket fixing clips, equipped with 200 pieces of screws for convenient install, enough quantity for....

Makita-built 4-pole motor delivers superior fastening speed with 4,000 RPM.
High collated screw capacity range: 1" to 2-1/8".
Screw guide prevents screw strip tangling and can fold against the auto feed housing for easy storing.
Rugged aluminum dust-proof auto feed housing provides smooth sliding action.
Compact and ergonomic design at only 16-3/4" long.

SUPERIOR HOLDING POWER - 1” (25mm) plastic collated caps and 1”x.083” (25mmx2.1mm) full round head ring shank nails holds underlayment securely.
EASY RELOADS - Contains 10 reels of 200 collated plastic caps and 10 coils of 200 nails which covers 25 square.
WHERe TO USE - Use corrosion-resistant electro galvanized nails in areas more than 3,000 ft (914m) from saltwater.
MEETS ASTM REQUIREMENTS - Cap nails meet ASTM F1667 requirements and exceed ASTM D3161 and D7869-17 for wind and UV resistance.
BEST PRACTICE UNDERLAYMENT FASTENER - Use exclusively with STINGER CN100B for the best practice installation of roofing underlayment.

MORE PRESSURE: 225 PSI provides 38%* more usable air for more work and less run time.
40% MORE* AIR FLOW: 5.0 CFM @ 90 PSI to operate more tools and provide air to the entire jobsite.
LIGHTWEIGHT: At only 93 lbs, you can get more work done with less weight.
SIDING NAILER: Accepts 16º wire collated coil siding nails from 1-1/2" - 2-1/2". Also accepts 15º plastic collated coil siding nails from 1-1/2" - 2-1/4".
SELECTIVE ACTUATION: Switch between sequential or contact nailing with the simple flip of a switch.
EASY LOAD: Side load, tilt bottom magazine for fast and easy reloads.

Compatible with DeWalt corded screwdriver models: DW252, DW253, DW255, DW257, DW266, DW272, DW276.
Drives #6 - #12 1” to 2” length collated screws.
Patented corner-fit feed system Improves line of sight and provides better access to corners.
Feed-on-return drive system puts screws in-line with the bit before you drive for increased speed and consistency.
Removable feed system easily detaches from the screwdriver body for quick access to the bit and reversing or completing drives.

drives #6 - #12 1” to 3” length collated screws.
2500 rpm high-torque brushless motor with 1600 rpm selectable switch to decrease speed for heavy steel applications.
removable feed system quickly detaches from the body to expose the bit for easy reversing of screws.
patented corner-fit feed system improves line of sight and provides better access to corners.
feed-on-return drive system puts screws in-line with the bit before you drive for increased speed and consistency.
(2) 3.0 Ah Li-Ion Extended Life Batteries.

Compatible with Makita screwdriver models: FS2200, FS2500, FS4200, FS6200, XSF03, XSF04, XSF05.
Drives #6 - #12 1” to 2” length collated screws.
Patented corner-fit feed system Improves line of sight and provides better access to corners.
Feed-on-return drive system puts screws in-line with the bit before you drive for increased speed and consistency.
Removable feed system easily detaches from the screwdriver body for quick access to the bit and reversing or completing drives.

Construction Applications: Designed for siding, cedar shingles, roof and wall sheathing, and wood fencing projects.
Compatible Nails: 15 degree plastic collated coil siding nails from 1-1/4" – 2-1/2", and 15 degree wire collated coil siding nails from 1-3/4" – 2-1/2" (0.09" – 0.113" diameter).
Built to Last: One piece hardened steel drive blade and anodized aluminum cylinder result in a durable pneumatic tool resistant to damage.
Contact Actuation Firing: Capable of bump firing for speed or single sequential firing for precision.
Fire Lock: Prevents accidental firing for safety when not being used.