ReviewsPlastics Pipes Fittings Machinery

Legines Brass Pipe Fitting Hex Bushing 3/8 NPT Male to 1/4 NPT Female 1200psi 2pcs

  • Hex bushing for connecting two pipes with different diameters.
  • 3/8" Male NPT threads on one end and 1/4" female NPT threads on the other for connecting pipes with different ends.
  • Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
  • Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250....
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Pipe Décor Desk Inside Support Leg, Authentic Industrial Pipe, Unfinished Dark Grey Black Steel for Rustic Look, for Classic H Design Desks or Tables, 28.75-in H x 11.75-in, 1-in Diameter, 1-Pk

  • ...cs 3.5-in diameter, assembled leg specs 28.75 inches tall and 11.75-in wide.
  • Includes 1 “H” support table leg comprised of (2) 1-in x 8-in pipes, (2)1-in x 18-in pipes, (1) 1-in x 6-in pipes, (4) 1-in round flanges, (2) 1-in tees, (8) screws, instructions, and a clean and seal sheet.
  • pipes and fittings are industrial grade black steel and malleable cast iron.
  • standard steel grey color, commonly known as black within the plumbing industry.
  • PIPE DECOR genuine industrial pipes and fittings will stand the test of time.
  • You will know Pipe Décor parts and accessories when you hold them, beauty and beast, strength and style.
  • easily customize your PIPE DECOR projects with our many sizes of pipes and fittings.
  • PIPE DECOR pipe and fittings are coated with a light industrial grease to prevent rusting.
  • we highly recommend that you clean and seal each piece, before assembly, to ensure that they stay rust-free.
  • sealing the pipe with polyurethane spray will protect it from rust and scratches.
Check Stock

1M Drag Chain Cable Carrier R18 10x10mm(Inn HxW) Plastic Black Towline Wire Cable Chain Carrier for CNC Router Mill and 3D Printer,with Extra Connector,Screwdriver,Screws, Bridge Type(10x10）

  • 【Specification】Internal: 10 x 10mm/0.39 x 0.39inch(H*W).
  • External: 13.5 x 17.2mm/(0.53 x 0.68inch)；Total Length : 1M/39.4inch.
  • 【Extra】Extra one pair connector, can split the integral drag chain into 2 pieces to use.
  • Extra 8pcs screws, easy to fix the chain.
  • Extra Screwdriver, freely disassemble to change the length of the chain..
  • 【Multi-Applications】The black plastic drag chain cable carrier is suitable for the occasions of reciprocating motion, tow and protect the built-in electric cable, oil pipes, gas pipes, water pipes. It has been widely used for CNC machine tools, electronic equipment, stone machinery, glass machinery, doors and windows machinery, Injection molding machine, manipulator, lifting and transportation equipment, Automated warehouses etc..
  • 【Flexible】Every segment can be removed and it could be combined with another length to make one long piece..
  • 【Performance】 Low noise, wear resistance, high-speed movement..
Check Stock

1/2\ Floor Flange, Home TZH Malleable iron Pipe Fittings for Industrial vintage style, Flanges with Threaded Hole for DIY Project /Furniture/ Shelving Decoration (10 Pack)

  • 3/4 INCH PIPE ELBOW – TEN PACK: Our Brooklyn Pipe cast iron fittings 10 pack elbow pipes are made with from superior steel with 100% durability and strength and provides you with great flange elbow fittings at a very affordable price..
  • PERFECT FOR DIY: Whether you’re looking to build a pipe shelf, pipe towel rack, pipe lamp, our malleable 90 degree elbow industrial fitting is up to the task. These fittings are for decor and DIY projects only, they are not rated to carry gas or water..
  • RAW IRON: Our 3/4 inch black malleable iron pipe fittings are raw and unfinished iron. This means that you will need to seal or paint the flanges for your project. When handling raw iron, it’s normal for your hands to get dirty. You’ve probably seen iron workers in movies, they don’t come home clean!.
  • ONE CONVENIENT PACK: Our 3/4 90 degree elbow threaded flanges fittings pipes give you 100% super convenient benefits than other bands because our Brooklyn Pipe elbow is designed to be compatible with your all project parts.
  • UNLEASH YOUR CREATIVITY: We inspect and pack each pipe fitting and we offer a LIFETIME warranty on our products, just give us a call or send an e-mail. Now, with our black pipes bring the rustic, industrial style into your home, office or any inte....
Check Stock

10-2 Plastic Triglides Slides

  • Coupling for connecting two pipes with the same diameter in a straight run.
  • Hub ends for connecting to male unthreaded pipes or fittings.
  • PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.
  • Meets specifications ASTM D2665 and D3311 for quality assurance.
Check Stock

Fleetwood Mac Greatest Hits

  • Effectively removes oil, grease, and dirt from the surfaces of all sizes, classes, and schedules of PVC, CPVC, ABS, and styrene.
  • Designed for use before the application of Weld-On pipe primers and solvent cements.
  • Ensure the strongest bond possible between pipes and fittings by preparing your surfaces.
  • Low-VOC content minimizes environmental impact and helps improve crew working conditions.
  • May be used on FlowGuard Gold pipes and fittings.
Check Stock

NIBCO C4806 2 HXH 45 ELBOW PVC White, 2 Inch

  • 45-degree elbow for connecting two pipes at an angle.
  • Hub ends for connecting to male unthreaded pipes or fittings.
  • PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.
  • Meets specifications ASTM D2665 and D3311 for quality assurance.
Check Stock

Legines Brass Pipe Fitting Long Nipple, 1/8' NPT Male x 1/8' NPT Male Extender Straight Connector, 1-1/2'Length 1200psi (Pack of 5)

  • Long nipple for connecting two threaded pipes and extending pipe length.
  • 1/8" Male National Pipe Taper (NPT) threads for connecting to 1/8" female threaded pipes.
  • Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
  • Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Pipe Décor Desk Outside Leg, Authentic Industrial Pipe, Unfinished Dark Grey Black Steel for Rustic Look, for Classic H Design Desks or Tables, 28.75-in H x 21.5-in, 1-in Diameter, 1-Pack

  • flange specs 3.5-in diameter, assembled leg specs 28.75-in tall and 21.5-in wide.
  • Includes 1 “H” table leg comprised of (2) 1-in x 8-in pipes, (2) 1-in x 18-in pipes, (1) 1-in x 16-in pipe, (4) 1-in round flanges, (2) 1-in tees, (8) screws, instructions, and a clean and seal sheet.
  • pipes and fittings are industrial grade black steel and malleable cast iron.
  • standard steel grey color, commonly known as black within the plumbing industry.
  • PIPE DECOR genuine industrial pipes and fittings will stand the test of time.
  • You will know Pipe Décor parts and accessories when you hold them, beauty and beast, strength and style.
  • easily customize your PIPE DECOR projects with our many sizes of pipes and fittings.
  • PIPE DECOR pipe and fittings are coated with a light industrial grease to prevent rusting.
  • we highly recommend that you clean and seal each piece, before assembly, to ensure that they stay rust-free.
  • sealing the pipe with polyurethane spray will protect it from rust and scratches.
Check Stock

NIBCO U4810 11/2 HXHXH 45 WYE PVC White, 1.5 Inch

  • Wye with three openings for connecting and branching three pipes.
  • Hub ends for connecting to male unthreaded pipes or fittings.
  • PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.Lead Free.
  • Meets specifications ASTM D2665 and D3311 for quality assurance.
Check Stock

NA Black Hydra Krimp 71500 AC Hose Crimper

  • The lightweight hand-held hydraulic press is very portable..
  • Crimping pipes and fittings in an easy and labor-saving way..
  • The kit is applicable for beadlocking fitting and barrier A/C hose..
  • The dies snap quickly into the press fixture requiring no pins or screws..
  • Wide Application: The hydraulic crimper is ideal for shop and field operations, crimping pipes and fittings in an easy and labor-saving way. Customize....
Check Stock