ReviewsPlate Tube Cooler brazed Type brazing

Thermaltake 240mm Pacific DIY Liquid Cooling System R240 Radiator Cooling CL-W009-AL00BL-A

Optimized Heat Dispatching: Thermaltake R Series Radiators deliver an average heating load of 32℃-35℃. After brazing, the fin and tube connect to form a joint, thereby creating uniform heat transfer..
Slim Form Factor Design: R Series is a slim radiator with a 13-set flat tube design to increase heat transfer. Water flows down on one side, and then circulates back to the other side of the radiator..
High-Density Fin Design: The cooling performance improves significantly with increased fan speed, offering exceptional cooling performance during operation. FPI (fin per inch): 17..
German-Made Anti-Corrosion Materials: Designed with German aerospace-grade materials and constructed with zinc. Corrosion potentials of aluminum alloy with zinc can be reduced by 55.6% after brazing..

Proudly Made in the USA and 100% Flame Tested.
Use with acetylene and oxygen to achieve temperatures up to 5600 degrees Fahrenheit.
Rosebud tips are your best choice for brazing, pre-heating, straightening, annealing, bending, forging, etc..
Overall length is 7 inches and is ideal for HVAC/R brazing up to 2-5/8 inch copper tubing in tight work space.
Type17 Tips fit United’s Part No. 71 and Part No. WH550 Welding Handles.

Professional contractor grade portable oxyacetylene welding and brazing outfit-tanks not included (sold separately).
Cap'n hook five flame tip for brazing up to 1" copper tubing-u's Patent no. 4,191,333.
Welding/brazing tip for brazing up to 1" copper tubing and welding up to 1/8" steel.
Centurion series regulators with Protective rubber gauge boots.
Front valve welding handle with stainless steel ball point valves for accurate Gas control.

For all types of steel, malleable and cast iron, galvanized metals, brass, and bronze.
This flux is used for flame brazing with either an oxy-acetylene or electric carbon arc torch.
Active Temperature Range: 1400 to 2200 F (760 to 1205 C).
Meets AWS A5.31-91 Type FB3J Standards as well as MIL-F-16136B, Types A and B Standards.
Brazing Flux Powder comes in 8-Ounce container, Made in the USA.

Heat resistant non-stick coating reduces binding and gumming for cleaner, truer cuts.
Perimeter venting allows faster chip ejection and a strengthened core.
Laser cut plate with expansion control slots reduces warping and increases blade control.
Ring tensioned to maintain balance for straighter cuts.
The IRWIN Weld Tec Circular Saw Blade, Miter, is made stronger to last longer. This ultra-thin kerf blade features patented Weld Tec technology with carbide teeth that are welded not brazed and delivers the fastest cutting speed and increased durability when compared to previous IRWIN blades. Constructed with a heat-resistant, non-stick coating to reduce binding and gumming, these blades have laser-cut expansion slots to reduce warping and ring tensioned to maintain balance..
Carbide teeth are welded not brazed, resulting in stronger tooth bond, longer life, and durability..
UC2 carbide with sub-micro grain is 70% tougher than standard carbide, stays sharp longer, and offers best-in-class cut quality..
Carbide teeth are welded not brazed, resulting in 30% stronger tooth bond, longer life, and durability..

Flame control valve makes it easy to ignite/extinguish the flame and adjust the size of the flame..
360° rotation of torch tube is capable for various using environment. Temperature can reach 3000℃..
For silver soldering copper pipes, loosening rusted nuts/bolts/screws, brazing copper/mild steel/aluminum..
The propane brazing torch with hose can provide greater freedom of movement and great work safety..
Suited for 14.1-16oz cylinder, connection of CGA600 (1"-20UNEF)..

General Maintenance Work - Extremely Popular General Maintenance Work, Automotive Repair, Metal Sculpture, Air Conditioning, Refrigeration etc..
Ideal Use - For iron or steel welding, braze-welding, plus brazing, cutting, bending & forming..
Waterproof Storage Compartment - Carrier is made of tough, lightweight polypropylene.
Regulator Type - Rear entry regulators for better balance on the small cylinders Oxygen Regulator Type: (CGA540) Acetylene regulator Type: (CGA200)..
Complete Set - Compatible gas-welding accessory kit includes a 20cu. ft oxygen tank and 10cu. ft acetylene tank with regulators, along with full brass torch assembly..

Super Sil-Flo brazing rod is a brazing alloy that is ideal for large and small copper tubing installations.
Typical applications are refrigeration control valves, joining copper wires to rotor bars, electrical connections.
T joints, wage joints and sleeves, couplings on return bends and condenser fitting.
Sil-flo is not recommended for ferrous metals such as iron or steel.

MATERIAL: 21 Rods 1/16″ x 9.84″ aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve y....