ReviewsPlc Coupler

DC12-36V 16 Channel PLC Amplifier Board,PLC Signal Amplifier Board,Isolation Relay Module,NPN Input PNP Output,Drilling,PCB Module Rack Installation

  • Can be used to protect PLC internal relays..
  • Effectively avoid system instability caused by mutual interference..
  • Effectively protected the output nodes of the PLC..
  • Can directly replace traditional relays, reducing maintenance time and costs..
  • Hole punching and PCB module mounting are more convenient..
Check Stock

SHENYANG 5 Pack MR-BAT ER17330V3.6V A6BAT PLC Battery for FANUC CNC System Power

  • ★ Battery Model Number : A6BAT Battery- Size 2/3A 3.6V Lithium Battery.
  • ★ 3.6v lithium battery with wire lead and connector ,2 wire 2-pin connector.
  • ★ Battery- Size 2/3A 3.6V Lithium Battery ； Dimensions battery: ø17 mm x 33.6 mm.
  • ★ Other applications: Alarm system, PLC memory backup power supply, CNC system, servo motors, machine tools, instruments, special electronic equipment, etc..
  • ★ Package Included: 5 x A6BAT ER17330V PLC Battery.
Check Stock

UBay New Proscan Curtis Replacement TV Remote Fit for PLED4274A PLED2845A PLDED4016A PLED4011A

  • No Programming Required ! Put batteries in and work (Battery NOT include).
  • If not work directly, you may need to clear the TV's memory first. Please turn off the TV, unplug the power cord, wait for 30 seconds, then replug in the power cord, turn on the TV, and try the remote again..
  • Compatible with Proscan PLED2694A PLC3708A PLCD3283A PLCD3717A PLCD4692A PLDED3273A TV PLED2694A PLC3708A PLCD3283A PLCD3717A PLCD4692A PLDED3273A PLED2243A TV.
Check Stock

bROK Products 32973 Coupler 2\ Ball, 3\ Channel - 3500 lb.

  • PRECISE FIT. This trailer coupler is designed to mount onto a 3-inch wide trailer tongue beam and couple to any standard 2-inch diameter trailer ball.
  • EASILY ADJUSTABLE. Equipped with a posi-lock spring and adjustable nut on the inside, this trailer hitch coupler can easily be adjusted to ensure a snug fit on the trailer ball.
  • SECURE COUPLING. The posi-lock latch mechanism of this trailer tongue coupler accepts a safety pin or coupler lock for enhanced security.
  • HIGH-STRENGTH. Constructed from punched, die-cut steel, this trailer ball coupler is rated as a class 2 trailer coupler and has a capacity of 3,500 lbs. gross trailer weight and 500 lbs. tongue weight.
  • CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this straight tongue trailer coupler is finished in a durable zinc plating and makes a great boat trailer coupler.
Check Stock

CURT 25217 Black A-Frame Trailer Coupler, 2-Inch Hitch Ball, 7,000 lbs

  • PRECISE FIT. This trailer coupler is designed to mount onto an A-frame trailer tongue and couple to any standard 2-5/16-inch diameter trailer ball.
  • EASY OPERATION. Equipped with an easy-lock latch mechanism, this trailer hitch coupler is quick and simple to operate and offers a snug fit on the trailer ball.
  • SECURE COUPLING. The easy-lock latch mechanism of this trailer tongue coupler accepts a safety pin or coupler lock for enhanced security.
  • HIGH-STRENGTH. Constructed from punched, die-cut steel, this trailer ball coupler is rated as a class 4 trailer coupler and has a capacity of 10,000 lbs. gross trailer weight and 1,500 lbs. tongue weight.
  • CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this A-frame tongue trailer coupler is finished in a durable black powder coat and makes a great boat trailer coupler.
Check Stock

CURT 25100 Straight Tongue Trailer Coupler for 3-Inch Channel, 2-In Hitch Ball, 5,000 lbs

  • PRECISE FIT. This trailer coupler is designed to mount onto a 3-inch wide trailer tongue beam and couple to any standard 2-inch diameter trailer ball.
  • EASILY ADJUSTABLE. Equipped with a posi-lock spring and adjustable nut on the inside, this trailer hitch coupler can easily be adjusted to ensure a snug fit on the trailer ball.
  • SECURE COUPLING. The posi-lock latch mechanism of this trailer tongue coupler accepts a safety pin or coupler lock for enhanced security.
  • HIGH-STRENGTH. Constructed from punched, die-cut steel, this trailer ball coupler is rated as a class 3 trailer coupler and has a capacity of 5,000 lbs. gross trailer weight and 700 lbs. tongue weight.
  • CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this straight tongue trailer coupler is finished in a durable zinc plating and makes a great boat trailer coupler.
Check Stock

GCAN-205 Modbus TCP to CAN Converter, Allows User to Connect Some ModTCP Master with an existing CAN Network

  • The GCAN-204 is a CAN to Modbus RTU Slave Converter with one Serial interface and one CAN interface. It allows user to connect some Modbus Master (for example: PLC, HMI, etc) with an existing CAN network. It has integrated isolation protection module and easier to install with DIN-rail..
  • CAN industrial automation control system.
  • The serial communication device is connected to CAN-bus.
Check Stock

EZ Snap Covers 9 Foot Long Standard Height 7 1/2″ Baseboard Heater Cover Kit with 2 Closed End Caps

  • EZ Snap Covers are 20 gauge galvanized steel with white epoxy powder coating. They are guaranteed never to rust and are 18% thicker steel than all comparable baseboard heater covers. End caps are 18 gauge thickness..
  • Our covers fit 95% of all existing hot water baseboard radiator heaters. Installation takes five minutes, requires no power tools, and saves you on pricey contractor bills..
  • Lengths over 8’ include a coupler to join the panels together. 8’ will be 2 4’ covers and a coupler, 9’ is 1 4’ and 1 5’ cover and a coupler.
  • 10’ is 2 5’ covers and a coupler, 11’ is 1 5’ and 1 6’ and a coupler.
  • 13’ is 1 6’ and 1 7’ and a coupler.
  • EZ Snap Covers have a lifetime warranty against rust. If they rust, send them back and we will replace them..
Check Stock

CURT 25128 Straight Tongue Trailer Coupler for 2-Inch Channel 1-7/8-In Hitch Ball 2,000 lbs

  • PRECISE FIT. This trailer coupler is designed to mount onto a 2-inch wide trailer tongue beam and couple to any standard 1-7/8-inch diameter trailer ball.
  • EASILY ADJUSTABLE. Equipped with a posi-lock spring and adjustable nut on the inside, this trailer hitch coupler can easily be adjusted to ensure a snug fit on the trailer ball.
  • SECURE COUPLING. The posi-lock latch mechanism of this trailer tongue coupler accepts a safety pin or coupler lock for enhanced security.
  • HIGH-STRENGTH. Constructed from punched, die-cut steel, this trailer ball coupler is rated as a class 1 trailer coupler and has a capacity of 2,000 lbs. gross trailer weight and 200 lbs. tongue weight.
  • CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this straight tongue trailer coupler is finished in a durable zinc plating and makes a great boat trailer coupler.
Check Stock

2\ Straight Trailer Coupler, 2\ Channel - 3500 lb Class II - for Towing RV, Boat, Camper(3500LBS 2\X2\)

  • PRECISE FIT. This trailer coupler is designed to mount onto a 2-inch wide trailer tongue beam and couple to any standard 2-inch diameter trailer ball.
  • EASILY ADJUSTABLE. Equipped with a posi-lock spring and adjustable nut on the inside, this trailer hitch coupler can easily be adjusted to ensure a snug fit on the trailer ball.
  • SECURE COUPLING. The posi-lock latch mechanism of this trailer tongue coupler accepts a safety pin or coupler lock for enhanced security.
  • HIGH-STRENGTH. Constructed from punched, die-cut steel, this trailer ball coupler is rated as a class 2 trailer coupler and has a capacity of 3,500 lbs. gross trailer weight and 500 lbs. tongue weight.
  • CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this straight tongue trailer coupler is finished in a durable zinc plating and makes a great boat trailer coupler.
Check Stock

CURT 25153 Straight Tongue Trailer Coupler for 2-Inch Channel 2-in Hitch Ball 3,500 lbs CLEAR ZINC

  • PRECISE FIT. This trailer coupler is designed to mount onto a 2-inch wide trailer tongue beam and couple to any standard 2-inch diameter trailer ball.
  • EASILY ADJUSTABLE. Equipped with a posi-lock spring and adjustable nut on the inside, this trailer hitch coupler can easily be adjusted to ensure a snug fit on the trailer ball.
  • SECURE COUPLING. The posi-lock latch mechanism of this trailer tongue coupler accepts a safety pin or coupler lock for enhanced security.
  • HIGH-STRENGTH. Constructed from punched, die-cut steel, this trailer ball coupler is rated as a class 2 trailer coupler and has a capacity of 3,500 lbs. gross trailer weight and 500 lbs. tongue weight.
  • CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this straight tongue trailer coupler is finished in a durable zinc plating and makes a great boat trailer coupler.
Check Stock