ReviewsPlc Products

WinnerEco 5pcs 1 Channel DC 5V Relay Switch Module for Raspberry Pi ARM AVR

1-channel relay interface board which can be controlled directly by a wide range of microcontrollers. Controllers includes AVR, PIC, ARM, PLC, etc..
Relay output maximum contact is AC110V ~ AC250V 10A and DC30V 10A..
Standard interface can be directly connected with microcontrollers..
Red working status indicator for power on indication.Green working status indicator for relay the switch..
It can control various appliances and other equipments with large current.Widely used for all MCU control, industrial sector, PLC control, smart home control..

Check Stock

STEPMAX 3.6V 8000mah YASKAWA HW0470360-A Battery Pack for Motoman Robot with Plug

【Capacity: 8000mah、Voltage: 3.6V、Size：14.5 * 53 mm】.
【Feature】①High voltage and stable working voltage②Large capacity and good safety③The use of a wide range of temperature (-40℃~+85℃)④Long service life: 10 years or more.
【Note】This battery is not rechargeable..
【Main application】Our battery mainly applies to Yaskawa industrial robots, CNC machine tools, PLC industrial control equipment systems, machine tool equipment, PLC backup memory power supplies, various measuring instruments, etc..

Check Stock

DC12-36V 16 Channel PLC Amplifier Board,PLC Signal Amplifier Board,Isolation Relay Module,NPN Input PNP Output,Drilling,PCB Module Rack Installation

Can be used to protect PLC internal relays..
Effectively avoid system instability caused by mutual interference..
Effectively protected the output nodes of the PLC..
Can directly replace traditional relays, reducing maintenance time and costs..
Hole punching and PCB module mounting are more convenient..

Check Stock

SHENYANG 5 Pack MR-BAT ER17330V3.6V A6BAT PLC Battery for FANUC CNC System Power

★ Battery Model Number : A6BAT Battery- Size 2/3A 3.6V Lithium Battery.
★ 3.6v lithium battery with wire lead and connector ,2 wire 2-pin connector.
★ Battery- Size 2/3A 3.6V Lithium Battery ； Dimensions battery: ø17 mm x 33.6 mm.
★ Other applications: Alarm system, PLC memory backup power supply, CNC system, servo motors, machine tools, instruments, special electronic equipment, etc..
★ Package Included: 5 x A6BAT ER17330V PLC Battery.

Check Stock

UBay New Proscan Curtis Replacement TV Remote Fit for PLED4274A PLED2845A PLDED4016A PLED4011A

No Programming Required ! Put batteries in and work (Battery NOT include).
If not work directly, you may need to clear the TV's memory first. Please turn off the TV, unplug the power cord, wait for 30 seconds, then replug in the power cord, turn on the TV, and try the remote again..
Compatible with Proscan PLED2694A PLC3708A PLCD3283A PLCD3717A PLCD4692A PLDED3273A TV PLED2694A PLC3708A PLCD3283A PLCD3717A PLCD4692A PLDED3273A PLED2243A TV.

Check Stock

GCAN-205 Modbus TCP to CAN Converter, Allows User to Connect Some ModTCP Master with an existing CAN Network

The GCAN-204 is a CAN to Modbus RTU Slave Converter with one Serial interface and one CAN interface. It allows user to connect some Modbus Master (for example: PLC, HMI, etc) with an existing CAN network. It has integrated isolation protection module and easier to install with DIN-rail..
CAN industrial automation control system.
The serial communication device is connected to CAN-bus.

Check Stock

Fafeicy 12-Channel DC12-36V PLC Signal Amplifier Board Isolation Relay Module Amplifier Board with NPN Input PNP Output

Protection function: The relay can effectively avoid system instability caused by mutual interference, effectively protect the output node of the PLC, ensure the normal transmission of the signal, and thereby protect the relay..
Uses: The relay module can be used to protect the PLC internal relays, which can directly replace traditional relays, reducing maintenance time and cost.
Stable performance: The signal amplifier is made of high-quality electronic components with stable and reliable performance..
Easy to install: It is recommended to design to make drilling and module installation more convenient..
After-sales service: We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..

Check Stock

Agatige Frequency to Voltage Converter Module, 0-10Khz to 0-10V F/V Digital to Analog Converter Conversion Module

FUNCTION: The frequency of the pulse signal 0HZ to 10KHZ converts into an analog voltage signal of 0-10V. Can be used to interface switching between the PLC and the frequency converter, or interface matching such as the matching of motion control card and inverter control..
FEATURES: Input pulse level is 5V 12V 24V, which can be directly entered without serial resistor. The input signal frequency must maintain more than 0.5 seconds..
ANTI-INTERFERENCE: Conversion module's signal inputs with optical coupling isolation, which can ensure that the capability of anti-interfence..
APPLICATION: Frequency to Voltage Converter Module Can be used for industrial control panel PLC or other signal interface switching.
MAJOR SPECIFICATIONS: Output current: 5MA,Voltage: 0-10V, Input pulse level: 5V 12V 24V, Frequency: 0 to 10KHZ..

Check Stock

Texas Instruments SN74HC04N CD74HC04 74HC04 Hex Inverters DIP14 10 Pack

✊【Easy to Use】Our products is a high-quality PLC Programmable Controller, and built to strict quality control standards, as a artistic appearance and simple structure, it all 10 ports use photoelectric isolation to transmit signals, which can effectively filter out various interferences, the input supports positive/negative triggers, very friendly to novices..
✊【Good Performance】Our products has Using 32‑bit industrial processors, small PLCs suitable for industrial automation applications. Besides, it has high‑speed counter function, comes with analog input and output channels, supports 2 channels of 100K high‑speed pulse output..
✊【Strong Applicability】ThisPLC Programmable Controller has Compatible with most commands of FX3U, support for GXworks2/GxDeveloper programming, with independent programming port, which can help you in many areas..
✊【Wide Application】Our power circuit adopts anti‑reverse and anti‑surge design, which is widely used in the signal acquisition and control of industrial field equipment..
✊【Use it with Confidence】You can use our product with confidence, this lathe keeps guaranteed quality after many inspections before leaving the factory..

Check Stock

WSDMAVIS 2Pcs PWM to Voltage Module 0% -100% PWM Converted to 0-10V Voltage Digital Analog Signal Converter for PLC Signal Interface Switching

The PWM transfer voltage module LC-LM358-PWM2V converts the PWM digital signals into 0 to 10V analog signals.Allowable error:5%..
It can be used as signal interface switching for PLC or other industrial control boards. The output voltage is regulated by adjusting the duty ratio of the PWM..
The modules are small in size and easy to use in different places.Easy to operate, fine tuned by potentiometer..
MCU embedded technology.Work Voltage:DC 12V-30V(Power requirements:> 100MA).
Select the PWM signal input level range through short-circuit.The peak of 4.5V to 10V level. The short cap install in ‘5V’. This level is used for normal controller or 5V MCU.
The peak of 12V to 24V level, so inserted in 24V. The short cap install in ‘24V’. This level is used for normal PLC controller..

Check Stock

YVO Optocoupler Isolation Board,4 Channel Optocoupler Isolation Module PLC Signal Level Voltage Conversion Board,Can be Used for Signal Isolation,Signal Level Voltage Conversion (24V to 5V)

【Widely Use】: Our optocoupler isolation board can be used for signal isolation, PLC signal level converting, level conversion between single-chip microcomputer, PLC and other signals, PNP / NPN signal to NPN signal, signal level voltage conversion and other purposes..
【20K Limit Switching Frequency】: The maximum switching frequency of our optocoupler isolation is 20K..
【Easy To Recognise】: Each channel of our optocoupler isolator module has been equipped with indicator, easier to recognise the working status..
【Size Parameters】: Module Dimensions: 72*55*18mm (length*width*height). Mounting Hole Size: 64*47mm. Mounting Hole Diameter: 3mm..
【SHOPPING WITH CONFIDENCE】: We are committed to providing you with quality services. If you have any question, please feel free to contact us by sending emails.We will provide after-sales service until you are satisfied..

Check Stock