ReviewsPleurotus Strip

Strip Light Mounting Clips KINDPMA Self Adhesive LED Strip Light Mounting Brackets Holder for 10mm(3/8") Wide Waterproof and Non Waterproof 3528/5630/5050/2835 LED Strip Light,100 Pack

  • 【Excellent Quality】 Strip light mounting brackets are made of eco-friendly premium PA66 material,safe and secure to hold LED strip light, No Damage On Brightness.
  • 【Strong Adhesive】LED strip light wire mounting clip feature with strong self-adhesive,so that the clip is firmly fixed on the light strip without falling easily.
  • 【Easy to Use】The cable clips for strip light are easy installation on any clean and dry surface, take down the LED strip light from the other end freely when replace or maintain it.
  • 【Application】 These mounting clamps works great with mounting strip lights,suitable for WATERPROOF and NON-WATERPROOF 3014/3528/5050/2835/5630/5730 SMD LED strip light within 12mm wide,and Wires'(thicker than1/6″) flat ethernet cable and car cable management.
  • 【Size】Self-adhesive holder strip light clips hollow height 3mm/0.12′ fit for 10mm（3/8inch）wide strip light,also great for manage some cables in car for a Wireless Car Charger and bluethooth device.
Check Stock

Eakin Cohesive Paste Clear, 2 Oz. Tube, 839010, n/a, 51839010

  • The Brava Strip Paste fills deeper folds and scars which creates a tight seal between your skin and the barrier..
  • The Brava Strip Paste can help avoid leakage..
  • The Brava Strip Paste can absorb moisture and reduce leakage, thereby protecting the peristomal area..
  • Tear off the amount of strip paste you need and mold it into place..
  • Brava Ostomy Strip Paste . 2 Ounce Per Strip - 10 per Box.
Check Stock

7FT PVC Carpet & Floor Transition Strip Edging Trim Strip Capping Strip Self Adhesive Suitable for Threshold Transitions with a Height Less Than 5mm (Gray)

  • Size of vinyl transition strip: Length 7Ft, width 1.48in, thickness 0.3in. It is suitable for the threshold transition where the height difference between the carpet/floor and the ground is within 5mm.
  • Flooring transition strip: Carpet floor transition strip, carpet edging trim, self-adhesive rubber threshold strip, suitable for threshold transition between carpet and floor tiles, floor to carpet, carpet to floor and edge trimming decoration.
  • Use of floor threshold strip: Transition strips work for a multitude of floor transitions. The most common transition is from hardwood or vinyl to carpet. Other arrangements include carpet to tile, carpet to concrete, hardwood to concrete, or tile.
  • Features of doorway transition strip: The carpet to tile transition strip is made of soft pvc material, The carpet transition strip surface is scratch-resistant, abrasion-resistant, dirt-resistant, easy to clean, and not easy to stain.
  • Note: Before installation, be sure to clean the surface of the transition strip. May be slightly less sticky if the transition adhesive strip surface is greasy, dusty or damp. You can blow it with a hot hair dryer to make it stick better.
Check Stock

Micomlan RGB LED Strip Lights Connectors Tools Kit Pack, 25 Installation Clips, 2 180 Degrees Connectors, 2 Bing Cord Clips and 2 Small Cord Clips Meet Your Lights DIY Needs

  • LED Connectors Kit Meets All Your Needs --- The Micomlan led connectors kit contains 4 types of light strip accessories. You will get: 25 x LED Strip installation clips, 2 x 180 degrees connectors, 2 x big cord clips and 2 x small cord clips. The perfect set of connectors to set up your LEDs easily and make them custom..
  • No Sodering & Easy To Use --- The Micomlan RGB LED Strip Connectors that we offer make it possible to connect mutil-color RGB LED flex strips without soldering. You can use waterproof-design easy-clasp solderless connectors to connect different LED strips..
  • What You'll Get --- 100% satisfaction with a 12-months warranty and lifetime support. LED strip connectors kit includes 25 x LED Strip installation clips, 2 x 180 degrees connectors, 2 x big cord clips and 2 x small cord clips..
  • Firm Connection And Reliable material --- Made of PBT material, the LED strip lights connectors are durable, thick enough to ensure its safety and durability. You just need to insert the light strip into the connectors without the need of soldering, convenient for you to DIY LED strip..
  • Worry-Free Service --- We are committed to providing customers with high-quality led strip connectors kit. If you received the product and find that any of the accessories of t....
Check Stock

7FT PVC Floor Transition Strip Carpet & Floor Edging Trim Strip Self Adhesive Carpet Trim Suitable for Threshold Transitions with a Height Less Than 5 mm (Light Brown)

  • Size of vinyl transition strip: Length 7Ft, width 1.48in, thickness 0.3in. It is suitable for the threshold transition where the height difference between the carpet/floor and the ground is within 5mm.
  • Flooring transition strip: Carpet floor transition strip, carpet edging trim, self-adhesive rubber threshold strip, suitable for threshold transition between carpet and floor tiles, floor to carpet, carpet to floor and edge trimming decoration.
  • Use of floor threshold strip: Transition strips work for a multitude of floor transitions. The most common transition is from hardwood or vinyl to carpet. Other arrangements include carpet to tile, carpet to concrete, hardwood to concrete, or tile.
  • Features of doorway transition strip: The carpet to tile transition strip is made of soft pvc material, The carpet transition strip surface is scratch-resistant, abrasion-resistant, dirt-resistant, easy to clean, and not easy to stain.
  • Note: Before installation, be sure to clean the surface of the transition strip. May be slightly less sticky if the transition adhesive strip surface is greasy, dusty or damp. You can blow it with a hot hair dryer to make it stick better.
Check Stock

7FT PVC Carpet & Floor Transition Strip Edging Trim Strip Capping Strip Self Adhesive Suitable for Threshold Transitions with a Height Less Than 5mm (Coffee Bean Color)

  • Size of vinyl transition strip: Length 7Ft, width 1.48in, thickness 0.3in. It is suitable for the threshold transition where the height difference between the carpet/floor and the ground is within 5mm.
  • Flooring transition strip: Carpet floor transition strip, carpet edging trim, self-adhesive rubber threshold strip, suitable for threshold transition between carpet and floor tiles, floor to carpet, carpet to floor and edge trimming decoration.
  • Use of floor threshold strip: Transition strips work for a multitude of floor transitions. The most common transition is from hardwood or vinyl to carpet. Other arrangements include carpet to tile, carpet to concrete, hardwood to concrete, or tile.
  • Features of doorway transition strip: The carpet to tile transition strip is made of soft pvc material, The carpet transition strip surface is scratch-resistant, abrasion-resistant, dirt-resistant, easy to clean, and not easy to stain.
  • Note: Before installation, be sure to clean the surface of the transition strip. May be slightly less sticky if the transition adhesive strip surface is greasy, dusty or damp. You can blow it with a hot hair dryer to make it stick better.
Check Stock

8Pack 5 Pin RGBW Connector Waterproof Led Strip to Wire Connector, Transparent Solderless Connector for 12mm Led Strip Light, 16.4ft Extension Cable

  • 【Solderless】Connect strip to wire without stripping insulation, no soldering, no need to peel off waterproof cover, quick and flexible connection..
  • 【Compatibility】The transparent strip to wire connectors can not only be compatible with 5V, 12V, 24V LED light strips, but also suitable for 12 mm LED strip lights and 22 AWG 5 conductor wires..
  • 【Easier Installation】Insert wires into the connector guide slot and then press cap down, align the soldering pads of the light strip surface with the pins on the LED light strip connectors, finally check the positive and negative poles are correct..
  • 【Premium Quality】The newest transparent LED strip light connectors are more stable and easier to install than ever. PVC plastic wire cover and tin plated copper core ensure steady, safety and long-lasting connection..
  • 【What you get】 The package includes 8 pack 5pin rgbw transparent led strip connectors and 16.4 feet light strip cable, strip to wire quick connection, perfect to satisfy connection needs..
Check Stock

All Glass Aquarium AAG25920 Fluorescent Strip Light, 20-Inch

  • All-Glass Strip-Lights are used with Versa-Tops for proper aquarium lighting.
  • These are exact strip-light replacements for Full Hoods.
Check Stock

10 Packs Solderless LED Strip Connector, Transparent Track Lighting Connectors, Wire Strip Lights, 16.4 Feet LED Strip for LED Pin Connector (Simple Style,5 Pin, 10 mm)

  • A complete combination: the package comes with 1 piece of 16.4 feet light strip cable and 10 packs of transparent led strip connectors, useful and practical, enough to satisfy connection needs.
  • Nice compatibility for most light strips: the LED strip light connectors can not only be compatible with 5V, 12V, 24V LED light strips, but also serve for 10 mm LED strip lights and 22 AWG 5 conductor wires, solid wires and multi core wires.
  • Tips: not suitable for 8 mm LED strips, 3528 LED strip and 20 AWG wire.
  • Stable and flexible to connect: you just connect the LED light wire strip to wires without stripping insulation, soldering and peeling off waterproof cover, which is easy and convenient, saving your time and energy.
  • Firmly apply: the LED light connectors are made of quality material, transparent, tough and safe, which can make your light strips more awesome in reducing the dark area.
  • While the LED strip light wire adopts quality tin plated copper material, sturdy and safe, providing a long term service for you.
  • Easily operate: you need to insert LED strip light wire into the guide slot and then press cap down, align the soldering pads of the light strip surface with the pins on the LED light strip connectors, then check the positive and negative poles are ....
Check Stock

5050 4Pin LED Strip Connector Kit - 10mm RGB LED Connector Kit Includes RGB Extension Cable, 12x LED Strip Jumper, 10x L Connectors, 2X T Connector, 10x Gapless Connectors, 20x LED Strip Clip

  • ★PACKAGE INCLUDES: 1x 2 way RGB splitter cable, 1x RGB extension cable, 10x LED strip jumper connector, 2x strip to RGB controller jumper, 10x L Shape Connectors, 2x T Shape Connectors, 10x gapless LED strip Connector, 20x LED strip light clips, 10x 4 Pin Male Connector, 2x Pry opening tool.
  • ★APPLICATION: 10mm 4 wire LED light strip connector kit for waterproof and non-waterproof 5050 RGB Color Changing LED strip lights.
  • ★OPERATING CONDITION: These LED tape connectors support 0-4A current and 0-24V voltage input, heat resistance level from -20 ~ 100 degree.
  • ★NOTE: When connecting waterproof LED strip lights with these LED strip connectors, silicon gel on the surface of soldering area must be peeled off.
  • ★WARRANTY: 24 months warranty for all iCreating LED strip light connector, 90 days money back guarantee for any reason, 24 hours online customer service.
Check Stock

5050 4Pin LED Strip Connector Kit with 2 Way RGB Splitter Cable, 2X Strip to RGB Controller Jumper, 2X LED Strip to Strip Jumper, 5X Cuttable L Shape PCB, 10x Gapless Connectors, 20x LED Strip Clips

  • Hassle Free: 24 months return policy for all iCreating 5050 4Pin LED strip connector kit, 90 days full refund policy, 24 hours online customer service.
  • Package Includes: 1x 2 way RGB splitter cable, 2x strip to RGB controller jumper, 2x LED strip to strip jumper with wire, 5x Cuttable L Shape PCB, 10x gapless connectors, 20x LED Strip Clips, 10x 4 Pin Male Connector, 2x Pry opening tool.
  • Application: 10mm 4 wire LED light strip connector kit for waterproof and non-waterproof 5050 RGB Color Changing LED strip lights.
  • Operating Condition: These LED tape connectors support 0-4A current and 0-24V voltage input, heat resistance level from -20 ~ 100 degree.
  • Note: When connecting waterproof LED strip lights with these LED strip connectors, silicon gel on the surface of soldering area must be peeled off.
Check Stock