ReviewsPll Input output Impedance

American Bass Black 3 Way Electronic Crossover w/Remote Bass Knob ABX 3.1A

• This Listing Includes: (1) Crossover (1) Bass Knob.
• Supply Voltage: 11-15V DC - Input Current: 0.3A Max - Distortion: 0.01% THD.
• Frequency Response: 10Hz- 50KHz - 3dB - S/N Ratio (A Weighted): More than 95dB - Separation: 60dB.
• Front High-Pass (x1): 35-400Hz - Front High-Pass (x20): 700-8KHz - Rear High-Pass (x1): 35-400Hz - Sub Low-Pass: 45-250Hz.
• Input Impedance: More Than 10K Ohms - Output Impedance: Less Than 1K Ohms - Output voltage Level: 8 Volts Max.

Donner Electric Drum AMP 35-Watt Electronic Drum Amplifier DDA-35 Keyboard Speaker with Aux in and Wireless Audio Connection Drum/Keyboard/MIC 3 in 1 Amplifier with 3-Band EQ and DI Out

• 【Equipped with two speakers】35-Watt Drum Amplifier that with TWO Speakers(LF:8-inch woofer, HF:2.5-inch tweeter, Impedance: 4 ohms ) provides rich tone with intuitive controls.1/4"DI Out:Audio output port, which can be connected to other speakers through audio cable to provide audio input to other speakers..
• 【Unique-Design for Electronic Drums】Use for Electric Drum practice, street performance, karaoke with friends, band performance, outdoors playing.Frequency response ranges from 20 to 20KHZ.Musical instrument input which can be connected to 'electronic drum', 'keyboard', etc..
• 【Multi-function Wireless control button】High-Efficiency and Super Durability.Extremely versatile 2-channel Drum amplifier.two inputs with separate volume control for each channel.Controls: 2-Volume, Treble,Middle, Bass.AUX-Volume,Wireless audio connection..
• 【Two channels】Two 1/4" Instrument Input, 3-Band EQ, 1/8" Auxiliary Input Jack for Jam-Along with Media Player or CD, 1/8" Headphone Output Jack for Silent Practice.DI output port for external active speakers.Audio output port, which can be connected to other speakers through audio cable to provide audio input to other speakers..
• 【Supporting microphone Input】Dynamic Mic Mode/Line in Mode. Supporting micropho....

MC14046BCP Phase Lock Loop (PLL) IC 1.9MHz 1 16-DIP (0.300\

• ...r voltage-controlled oscillator (VCO) and two different phase comparators having a common signal-input amplifier and a common comparator input..
• Very low power consumption: 70 µW (typ.) at VCO, VCO inhibit control for ON-OFF keying and ultra-low standby power consumption fo = 10 kHz, VDD = 5 V, Source-follower output of VCO control input (Demod. output), 100% tested for quiescent current at 20 V.
• Operating frequency range up to 1.4 MHz (typ.) at VDD = 10 V, RI = 5 k, High VCO linearity: 003c1% (typ.) at VDD = 10 V, 5-V, 10-V, and 15-V parametric ratings.
• Low frequency drift: 0.04%/°C (typ.) at VDD = 10 V, Choice of two phase comparators: Exclusive-OR network (I) Edge-controlled memory network with phase-pulse output for lock indication (II), Zener diode to assist supply regulation, Standardized, symmetrical output characteristics, Meets all requirements of JEDEC Tentative Standard No. 13B, "Standard Specifications for Description of 'B' Series CMOS Devices".
• A Versatile Building Block for Micropower Digital and Analog Applications, Example Applications: FM demodulator and modulator, Frequency synthesis and multiplication, Frequency discriminator, Data synchronization, Voltage-to-frequency conversion, Tone decoding, FSK - Modems, Signal conditionin....

ZeeVee Hdbridge HDB2920-NA 2-Channel HD-SDI MPEG2 Digital Video Encoder/QAM - 1080 North America

• Fine workmanship, with cost effectiveness for your own local CATV system..
• VHF working frequency for PLL controlled, HD input, A/V output, RF output..
• Support NTSC and PAL TV format output, no need to install driver program, portable, flexible, plug and play..
• Made of high quality ABS material, sturdy, durable and long service life..
• Professional manufacturing, stable characteristics and high reliability..

Rockville APM10C 10\ 400 Watt Powered/Active Studio Subwoofer Pro Reference Sub, Classic Wood, 10 inch

• ...ontrol. Crossover Frequency Control allows you to adjust low frequency input: 50Hz - 150Hz. 1/4" TRS input jack. Left and Right XLR input/outputs. RCA input/outputs..
• Details: Certification: CE and RoHS Compliant. Amplifier: Class D, very efficient amplifier with top components! (ST--STA309, ST--STA516, SMPS).Woofer Impedance: 8 Ohm. Signal to noise ratio: 98 dB (Maximum output with THD+1003c1%, A-weight).THD: 0.8%..
• Frequency Response: 34Hz - 150 KHz. 400 Watts peak output. 200 Watt RMS output.Input voltage: 120V. 10" woofer with rubber surround and paper cone with painted. Product Dimensions in Inches: (W*H*D): 13.4'' x 14.5'' x 15.7''..
• Shipping Dimensions in Inches: (W*H*D)17.3 ''x 19.3'' x 19.7 ''. Net Weight: 28.7 LBS. Shipping Weight: 34.1 LBS.Input Impedance (Ohms): 10 K Ohm Balanced. System Volume: (-30dB to +6dB).

AudioControl EPICENTER-INDASH Bass Maximizer and Restoration Processor

• BUNDLE INCLUDES: AudioControl Epicenter Bass Processor, Stinger SS600XS Amplifier Wiring Kit, and Car Toys Keychain. Car Toys is a USA AudioControl and Stinger Authorized Retailer and Certified MECP Installer (Installation not included). Manufacturer warranty protected..
• EPICENTER INPUTS: Preamp Inputs: 1 (2 channels) / Maximum Input Level: 15Vrms / Input Impedance: 10k? /// EPICENTER OUTPUTS: Preamp Outputs: 1 (2 channels) / Maximum Output Level: 13.5Vrms / Output Impedance: 150.
• EPICENTER PERFORMANCE: Total Harmonic Distortion: 0.003% / Frequency Response: 10Hz-100kHz / Signal to Noise: 110dB.
• Nothing sounds better than an awesome recording played back on a kickbutt system. Unfortunately, the acoustics of your vehicle can take away from your systems performance. While AudioControl products do not change the laws of physics (although they act like they do), autosound enthusiasts have long known that AudioControl products "make good stereo sound better"..
• FULL COPPER AMP KIT INCLUDES: 17FT Translucent Blue Power Wire, 3FT Translucent Silver Ground Wire, 17FT Translucent Blue Twisted Pair RCA Interconnects, 3FT Black flex loom tubing, 16FT Blue Remote Turn-on Wire, 20FT Translucent Speaker Wire, and 1pc AGU Fuseholder..

LD Systems Vocal Effects Processor (LDFX300)

• Microphone input for dynamic and condenser microphones, 16 digital effect presets in 16-bit quality.
• Low-noise instrument input with high input impedance for acoustic guitars, bass guitars or other instruments.
• Separate FX sends for both channels, additional FX loop for the instrument input, HPF and +48 V phantom power for microphone input.
• Signal/peak LEDs for both channels and clip LED for the effects, FX MUTE pedal for muting effects.
• MUTE ALL pedal for muting outputs, Balanced and unbalanced output, Operated on 9 V battery or optional power supply.

Kenwood KAC-HQR1004 Reference Series 1200W 4-Channel Car Amplifier

• Number Of Channels: 4 – Channel Minimum Impedance Unbridged: 2 Ohm Minimum Impedance Bridged: 4 Ohm.
• Bass/Gain Remote: Not Included Maximum Input Gauge Size: 4 Gauge Series : HQR (Kenwood) Built In Crossover: Full (AP).
• Combined Rms Power Output: 540 RMS Combined Peak Power Output: 1000W Dimensions: 220 x 35 x 169.
• Rms Output @ 4 Ohms : 100w × 4 Rms Output bridged @ 4 Ohms : 270W × 2.
• Ultra Hi-Performance 4 Channel Amplifier Super-slim profile, big-time power High density construction & Cooling Fan Custom made capacitor Gold-plate Terminals.

Ibanez Nu Tube Screamer Overdrive Pedal

Digitech Whammy 5 Multi-Effects Pedal Bundle with 2 Cables and Power Supply

• Instrument Input Type: 1/4" Unbalanced TS.

Dire Straits

• Features of BluTube WD Rockville BluTube WD Audiophile grade tube amplifier with Bluetooth Color 2-Tone silver with wood accent 25 watts x 2 RMS @ 8 ohm 35 watts x 2 RMS @ 4 ohm (1) set of RCA inputs to connect to any audio device like a TV Laptop or MP3 player etc.
• Optical input Coaxial input Sub output Tube amps do not hard-clip even at high volumes and are extremely efficient Due to this the amp sounds more like double the rated power!.
• Built in Bluetooth with 33 foot range Built-in Preamplifier Headphone output VU meter Adjustable bass and treble (2 band equalizer) USB input for music files from USB thumb drive.
• Rear Speaker Terminals Banana plug / binding post outputs for 2 speakers Frequency Response ( 3dB) 22Hz-20kHz Input Impedance 47kO Input Sensitivity 300mV Output Impendence 4-8ohm Total Harmonic Distortion(THD) ≤0 02%.
• Signal-to-Noise Ratio(S/N) ≥86dB Bluetooth 2 1+EDR USB Supports WAV/MP3/WMA/APE/FLAC. Unit weight 6 6 lbs Unit dimension 10 6″ x 10 2″ x 5 1″.