ReviewsPlug Sealed Valve

Maymom 21mm Flange and Duckbill Valve Compatible with Spectra S1 Spectra S2 Spectra 9 Plus Not Original Spectra Pump Parts 20mm Replace Spectra S2 Pump Parts Spectra Flange Spectra Duckbill Valve

  • "CONTENTS: 2ct Small 21mm flanges and 2ct duckbill valves for Spectra S2, Spectra S1 and Spectra S1Plus breastpump. Made by Maymom. Not Original Spectra Flanges, Spectra Duckbill Valve. Can use Maymom flange for Spectra S2 pump parts or Maymom valve for Spectra valve replacement. Made by Maymom, not by original spectra company. Maymom is not affiliated with Uzinmedicare, the trademark owner of spectra..
  • "COMPATIBLE AND INTERCHANGEABLE with Spectra pump parts. Maymom pump parts perform the same suction power as OEM parts, Spectra S2 pump parts, Spectra S1Plus accessories..
  • "MAYMOM FLANGE can work with Spectra wide-neck bottle (wide-mouth bottle), Avant bottle, and Maymom widemouth bottle. Available Flange sizes:13mm, 15mm, 17mm, 19mm, 21mm, 24mm, 25mm, 27mm, 28mm, 29mm, 30mm, 32mm..
  • "MAYMOM DUCKBILL VALVES features "easier to plug in and remove", "durable quality" and "color options".
  • "BPA/DEHP FREE. FDA compliant for food contacts. Tested by independent labs for safety. Test report online available for reference. Products in retail pack sealed by manufacturer. No problem with dishwasher top rack, water steam cleaning, boiling water or microwave-steam bags..
Check Stock

Lisle 19700 Valve Holder black

  • Commonly used when valve springs or valve stem seals are replaced.
  • Comes with two-step fitting for both 14 millimeter and 18 millimeter threads.
  • Thread fitting to spark plug hole and other end to air supply.
  • Heavy duty 12" flexible hose allows easy access to spark plug hole and air supply.
  • Air pressure helps prevent the valve from falling into the combustion chamber.
Check Stock

ExpertPower 12v 7ah Rechargeable Sealed Lead Acid Battery

  • Genuine ExpertPower Battery - The Most Trusted And Highest Reviewed Sealed Lead Acid Batteries On Amazon.
  • Battery Type - 12 Volt 7 Amp 20 Hour Sealed Lead Acid Battery With F1 Terminals.
  • Ease Of Mind -All Of Our Batteries Are MAINTENANCE FREE and VALVE REGULATED.
  • RUGGED CONSTRUCTION - The High Impact Resistant Battery Case Is Made Up Of A Non-Conductive ABS Plastic. This Material Has a Strong Resistance To Shock, Vibration, Chemicals and Heat..
  • AGM TECH - The Acid Inside Is Absorbed Between The Plates And Thereby Immobilized By A Very Fine Fiberglass Mat. This Along With The Valve Regulated, Spill-Proof Design Of Our Batteries Allows Trouble-Free, Safe Operation In Any Orientation.
  • USER FRIENDLY - Easy, One-Time Installation Of Our Maintenance Free and Valve Regulated Batteries Will Get Your System Or Application Running In No Time At All.
Check Stock

TOKHAROI 1/4’’ Quick Connect Inch Pressure Washer Ball Valve Kit, Carbon Steel Valve for Pressure Washer Hose, 4000 PSI

  • The ball valve kit is designed for high-pressure hoses.High pressure ball valve has 1/4’’ quick connector and 1/4’’ quick connect plug. Easy to connect ball valve to gun, nozzle, pump and hose..
  • The steel pressure washing ball valve kit is designed for pressure washer hose..
  • The max working pressure is 4000 PSI. The max working temperature is 158 F..
  • The ball valve is easy to turn on and off. It offers great leverage under high pressure..
  • Quick Disconnect Fitting: 1/4’’ quick coupler plug + 1/4’’ male NPT thread.
Check Stock

Yaeccc 4500PSI Washer Ball Valve Kit, 3/8 Inch Quick Connect for Power Washer Hose

  • High pressure ball valve has 3/8’’ quick connector and 3/8’’ quick connect plug. Easy to connect ball valve to gun, nozzle, pump and hose..
  • The max working pressure is 4500 PSI. The max working temperature is 158 F..
  • The steel pressure washing ball valve kit is designed for pressure washer hose..
  • Quick Disconnect Fitting: 3/8’’ quick coupler plug + 3/8’’ male NPT thread.
  • 3/8’’ quick coupler socket + 3/8’’ male NPT thread..
  • The ball valve is easy to turn on and off. It offers great leverage under high pressure..
Check Stock

GROHE 35115000 GrohSafe 3.0 Pressure Balance Valve Rough with Flush Plug with Elbows with PEX Crimp Outlets with Service Stops, Unfinished

  • PEX elbow connections for easy installation without adaptors, reducing leak points.
  • Valve can be easily rotated 180° to accommodate supply lines from floor or ceiling.
  • Flush plug allows valve body to be tested and flushed without the presence of the valve cartridge (ships with trim).
  • Can be tested using flush plug with air (200 psi) or water (300 psi).
  • Stainless steel retaining ring with flats secures flush plug and cartridge, eliminating the need for screws.
Check Stock

Mustang Carbon Fiber Trunk Spoiler, GT350 Track Pack Spoiler Carbon Fiber, 2015 Mustang GT Spoiler for 2015-2021 Rear Trunk Wing Racing Spoiler, fit V6, EcoBoost, GT and GT350 2015-21

  • 【Compatible Models】Precision Machined Aluminum Billet Plug for 2013-2020 Ford F150 2.7 or 3.5 E, Note: This does not apply to 2012 F150, they use a different configuration with 2 mechanical exhaust valves.
  • 【Use】Using this vent valve plug, you can vent hot pressurized to atmosphere, reducing inlet temperature and improving overall performance over the entire operating range. You get clean exhaust valve sound and better performance without recirculating hot air and introducing unnecessary heat into the engine..
  • 【Easy Installation】There is a large hose connecting the intake system to the exhaust valve with quick connect, snap-on/snap-on coupling. To install this plug, simply release the quick connect fitting from the bleed valve (located on the bottom drive side corner of the intercooler, behind the front bumper), snap into this precision machined plug, and zip the hose to the blower The gas top closes the valve outlet so it doesn't toss. That's it, the VTA mode is complete!.
  • 【DESIGN】This VTA mod allows you to vent hot boost into the atmosphere instead of recycling it and producing a hotter inlet temperature. T....
Check Stock

Inflatable Air Valve Replacement Screw Air Valve for Inflatable Rubber Dinghy Raft Pool Boat Fishing Boats 2pcs

  • High Quality: This Inflatable Air Valve is made of quality high dense ABS plastic, sturdy, anti and durable..
  • Size: Diameter of Thread Part: Approx. 20 mm / 0.78 inch. Length of Thread Part: Approx. 16 mm / 0.62 inch..
  • Cap Design: The fine design with a valve cap ensures antileak inflation. The bottom of the air plug has a rubber mat which can prevent leaks more effectively, give you safer protection..
  • Quickly Inflation & Deflation: The valve is a oneway inflation valve, good for quick inflation. Easy to fit, good performance and long serve life..
  • Wide Application: This Inflatable Air Valve fits most inflatable boat, raft, rubber dinghy, etc. Package Included: 2 * Air Valves. Comes in pair, good replacement accessory for your inflatable boat..
  • Quickly Inflation & Deflation: The valve is a oneway inflation valve, good for quick inflation. Easy to fit, good perf....
Check Stock

lukar 3/8" High Pressure Washer Ball Valve Kit with Teflon Tapes for Power Washer Hose, 4500 PSI

  • ①【Superior 3/8 Ball Valve】: lukar 3/8" ball valve pressure washer is made of high quality stainless steel + copper, durable, leakproof, rustproof, high temperature and pressure resistant.
  • ②【High Pressure Ball Valve Specification】 : 3/8" high pressure ball valve kit. 3/8" quick connect plug, 3/8" male NPT thread.
  • 3/8" quick connect socket, 3/8" male NPT thread. Max working pressure: 4500 PSI, Max working temperature: 158 °F.
  • ③【Easy to Use】: The 3/8 high pressure washe ball valve kit is easy to turn on and turn off, and provides good leverage under high pressure. Easy to connect to surface cleaner ,pressure washer gun, nozzle, pump and high pressure hose.
  • ④【Leak Proof】: lukar high pressure ball valve kit comes with 2 x teflon tapes. Teflon tape is used to wrap around the thread to effectively prevent water leakage.
  • ⑤【Package Includes】: 1 x high pressure washer ball valve.
  • 2 x Teflon Tapes, 2 x thread protection covers(Shown in the first image in listing).
Check Stock

Jtuxcke Air Mattress Valve, Air Valve 3 in 1 Inflatable Air Valve Secure Seal Cap Air Valve Caps Plugs Replacement for Inflatable Airbed Mattress, Sturdy for INTEX Inflatable Airbed Mattress

  • One Way: The 3 in 1 air valve is a one-way inflation valve, good for quick inflation..
  • The air mattress valve design ensures anti-leak inflation.Easy to fit, good performance and long serve life..
  • Designed for certain branded inflatable airbeds, such as for inflatable valve intex air mattress plug. Applicable models: 66723,66724,66725,68926,66767,66768,66769,66770,69710,66721,66720,67736,66972,66974,69710,67716.
  • Anti-leak: Air mattress valve features high secure air protection, the valve cap design ensures anti-leak when air inflation..
  • Easy To Install And Replace: 3 in 1 air valve secure seal cap It will fit into a hole about 4.28 cm in diameter and has a plug cover.
  • Very easy to install and replace,you will find it convenient..
Check Stock

TRUPOW 110v 265GPH Submersible Garden Pond Filter Water Fountain Pump with 13w Clarifier

  • This pond filter water pump contents filtration, pumping, fountain and other functions all in one, and the structure is reasonable and compact..
  • It has large filter surface, reasonable water flow channel, and the effect is remarkable.Built-in independent filter material box for easy replacement and adding different filter materials..
  • 3 different fountain nozzles to make your pond more beautiful. Adjustable valve for regulating flow to fountain or water feature..
  • All the parts accord with IPX8 standards, with the high level of the sealed and waterproof, this pond fountain filter pump has a long service life..
Check Stock