ReviewsPlug Unblocker

showingo 2 Pack Cooler Drain Plugs for YETI Cooler Accessories, Large & Small Drain Plug Cooler Plug Also Compatible with RTIC Coolers

  • Compatibility - Cooler Drain Plug Fit for Yeti Coolers and Also Compatible with RTIC coolers.
  • Cooler Drain Plug Kit Includes 1 Large Screw-On Gasket Replacement Coolers and 1 Replacement Small Cooler Drain Plug with Leak-Proof Design for 20QT, 45QT, 60QT Coolers.
  • Cooler drain plugs with leak-proof design replace your old or broken cooler drain plug perfectly. If the threads on the drain plug get worn out and it’s no longer as airtight as it used to be, perfect cooler replacement parts for RTIC Coolers.
  • Replacement drain plugs are easy to open and close to drain your cooler water, durable and good for easy draining. The screw-in gasket drain plug is easy to use and keeps your cooler leak proof and rugged. When partially open, the drain plug allows you to drain cooler without completely removing the plug..
  • Easy to Use.These replacement drain plugs can drain the cooler water while drain plug is partially open. Simply unscrew the drain plug, pull it out, tilt your cooler, and let the water out. Tighten the cooler drain plug is good for keeping your coolers cold..
Check Stock

ABN Spark Plug Thread Repair Rethreading Set 14mm Metric – Rethreading Tool Kit – Comprehensive Taps Inserts & More

  • REPAIR DEEP-SEATED PLUGS: The ABN Spark Plug Thread Repair Rethreading Set, 14mm Metric – Rethreading Tool Kit is a comprehensive and time-saving kit that incorporates taper and lug taps together with integrated ream to allow you to fix a stripped spark plug threaded port and repair deep-seated plug configurations.
  • VARIOUS APPLICATIONS: High-speed steel (HSS) ST14x1.25 M14x1.25 (14mm thread size) suitable for damaged spark plug threads to clean and rethread spark plug ports with either a tapered seat or a gasket seal type spark plug assembly on a lawn mower, car, or other vehicle engine.
  • Stepped tap ensures correct alignment of cutter in existing spark plug hole.
  • Extension tools allow easy access to the bottom of the plug recess (includes plug inserts).
  • EASY TO USE: Cut a larger threaded hole in cylinder head with tap, screw insert into head, screw plug into insert, use expander to help seat insert by tapping with a hammer.
  • Select insert that covers as much of the plug threads as possible to avoid carbon buildup (this can make unscrewing plug from insert difficult).
  • Use grease on flutes and any cutting tool to catch shavings, clean often, and vacuum when finished (grease not included).
  • EASY STORAGE: Heavy-duty 9.6” x 4.75” x 1.5” inch ....
Check Stock

Zing Green Products 7294 USA Made Recycled Plastic Universal Forklift/Cylinder/Electrical Plug Lockout Device, 4.25 x 7.25 x 3 Inch , Red

  • Universal Plug Lock: Electrical plug lock allows workers to perform several lockout functions including plug, forklift, and gas cylinder lockouts and supports OSHA standard 1910.147.
  • Locks Plugs: Power plug lockout fits plug sizes: 120 volt plug, 250 voltage-sp plugs, and 15-30 amp 3P plug.
  • Locks Forklifts: Plug locks for electrical plugs fit electric driven forklift’s 50-250 amp battery plug and starter battery’s negative (-) terminal.
  • Locks Gas Cylinders: Power cord lockout fits propane driven forklift LP gas cylinder shutoff valve and LP gas tank coupling.
  • USA Safety Product Supplier: Zing Green Products is a USA-based and -owned supplier of high-quality lockout and tagout products, and an expert in lockout/tagout (LOTO) compliance.
Check Stock

Innovative Products Of America 7885 18mm Spark Plug Hole Adapter

  • 【SPECIFICATIONS】 - Ours 3/8 inch drive 14mm thin wall magnetic swivel spark plug socket is 12 point design, so that the walls are only 1mm thick which is thinner than the standard 6 point spark plug socket..
  • 【COMPATIBLE WITH BMW AND MORE】 - 12 point 14mm thin wall spark plug socket is compatible with BMW 1 series (E81 / E87-N43B) & 3 series (E90-N43B) & 5 series (E60-N43B).
  • compatible with RENAULT Modus, compatible with Twingo, compatible with Clio, compatible with Kangoo with 1.2 16V engine.
  • compatible with PEUGEOT 207, 307, compatible with CITROEN C4 with 1.4 and 1.6L 16V engine.
  • compatible with MERCEDES-BENZ, M156, M276 engine.
  • compatible with Nissan Micra, compatible with Note, compatible with MINI1.2- 14L-cyl, ect..
  • 【MAGNETIC & 360° SWIVEL SPARK PLUG SOCKET】 - 14mm thin wall spark plug socket has a built-in magnet, it can fix and protect the spark plug well, thereby minimizing damage. In addition, our 14mm spark plug socket can rotate smoothly in 360°, and has great flexibility in narrow areas..
  • 【MADE OF CHROME VANADIUM STEEL】 - 14mm swivel spark plug socket thin wall is made of quenched and heat-treated chromium-vanadium alloy steel, which has a good effect of preventing rust and corrosion,....
Check Stock

Venom 15023 2S 20C 7.4V 2000mAh LiPo Universal Plug

  • C Rate and Maximum Continuous Discharge (Amps): 20C (40A).
  • Plug Type: Venom UNI Plug. Compatible with Plug, Tamiya Plug, Deans Plug & EC3 Plug..
  • Backed with Proven US Support and Venom's Industry Leading Limited Lifetime Warranty..
Check Stock

Venom 20C 2S 2000mAh 7.4V LiPo Battery with Universal Plug 2 Packs

  • C Rate and Maximum Continuous Discharge (Amps): 20C (40A).
  • Plug Type: Venom UNI Plug. Compatible with Plug, Tamiya Plug, Deans Plug & EC3 Plug..
  • Backed with Proven US Support and Venom's Industry Leading Limited Lifetime Warranty..
Check Stock

TENSPAL Kayak Drain Plug Kit Hull Coarse Thread Bung for Canoe Boat Set with Screws Replacement Hardware Accessories 2 PCs

  • ✔ 【PRACTICAL PRODUCT】- This Kayak Drain Plug Kit fits all kinds of canoeing, canoe, ship drain plug. Stops water infiltration and it is used to....
  • ✔【EASY TO USE】- Just install this kayak drain plug kit to the kayak boat, there are rubber gasket on each plug protect hull from damage..
  • ✔ 【PACKAGED】- This kayak drain plug kit packaging included 4 coarse thread kayak drain plug kit with 8 stainless steel screws..
  • ✔ 【SIZE FOR YOU】- Kayak drain plug kit press board size: Approx. 2.2*1.2 inches (5.6*3.1cm) , Outside diameter of scupper plug: Approx. 1 inch....
  • ✔【100% SATISFACTION GUARANTEE】- We promise 100% satisfaction guarantee and 60 days Money Back Services. Tips: Please confirm the size is....
Check Stock

Duthyvea Boat Oval Garboard Drain Plug Kit for 1 Inch Marine Bilge Hole Hull Pipe, Stainless Steel Polishing, 3/4 Thread, with Screws & Rubber Seal O-Rings

  • Boat Drain Plug Kit fits 1" diameter transom draining pipe hole. Back mount depth is about 0.55" (14mm). The surface length of the oval garboard drain plug kit is 2" (50mm), width: 1-1/2" (38mm)..
  • Quick Draining: This garboard drain plug kit has two layers thread with OD 3/4", you can easily to screw out the first layer of boat plug with hand, then the marine bilge water will flow out by middle hole..
  • The Boat Plug Retains Itself When Left Open: The retention system works for holding marine drain plug by the second threads layer, it’s not only save your time to find a wrench to open or close draining hole, but also make you conveniently to storage a boat plug by itself..
  • Stainless Steel Boat Drain Plug Kit: The surface of oval garboard drain plug is mirror-polished, made of stainless steel will reduce corrosion..
  • Replacement O Rings & Stainless Screws: 4 spare rubber o-rings would be included in the boat drain plug kit for watertight seal, 2pcs stainless steel screws help for installation..
Check Stock

2 Pack Drain Plugs for RTIC Coolers, Large & Small Cooler Drain Plugs Compatible with RTIC 20QT, 45QT, 65QT Coolers with New Two Drains

  • Compatible with -- RTIC replacement plugs used in the "Dual Drain Plug System". The large & small cooler drain plugs fit for RTIC 20QT, 45QT, 65QT new coolers with 2 drainage holes..
  • Good Design -- The screw-in gasket drain plug improved finger knob design which are easy to open and close to drain your cooler water. When partially open, the drain plug allows you to drain cooler without completely removing the plug..
  • Easy to Use -- These replacement drain plugs can drain the cooler water while drain plug is partially open. Simply unscrew the drain plug, pull it out, tilt your cooler, and let the water out. Tighten the cooler drain plug is good for keeping your coolers cold..
  • Package Included -- The cooler drain plug kit include 1pc large screw-in gasket cooler drain plug replacement for RTIC coolers and 1pc small cooler drain plug with leak-proof design replacement for RTIC 20QT, 45QT, 65QT Coolers..
  • Satisfaction Guarantee -- We care for all customer's feeling. If this product does not meet your expectations, please send it back for a 100% refund or contact us directly....
Check Stock

Readylift 44-3100 Upper Control Arms

  • more energy to the spark plug - with only 25 ohms per foot, fast firewire spark plug wires deliver the most spark energy to the plug as possible..
  • perfect for efi - fast firewire is the best spark plug wire on the market for fuel injection. the reactive core design effectively filters....
  • high temp ready - firewire comes with silicone plug boots that are capable of handling 550 degree for a long life..
  • silicone-on-silicone construction - fast firewire plug wires' sleeve features silicone-on-silicone construction, ensuring high resistance to oil,....
Check Stock

Venom 20C 3S 1300mAh 11.1V LiPo Battery with Universal Plug EC3/Deans//Tamiya

  • C Rate and Maximum Continuous Discharge (Amps): 20C (26A).
  • Plug Type: Venom UNI Plug. Compatible with Plug, Tamiya Plug, Deans Plug & EC3 Plug..
  • Backed with Proven US Support and Venom's Industry Leading Limited Lifetime Warranty..
Check Stock