ReviewsPlumbing Hand Tool

Milwaukee 45-88-6470 COPPER FLAT WASHER

AUTOMATIC ADJUSTMENT: Wrap this around type K, L, and M copper pipes and it will adjust from between 3/8" and 1” automatically.
WATER RESISTANT: The head of the unit is sealed tightly to prevent water from leaking in and damaging the motor. Ideal for plumbing applications.
HIGH POWERED MOTOR works at up to 500 RPM, letting you work up to 10 times faster than standard hand-operated pipe cutters or saws.
LOW CLEARANCE: You can use this with piping that is as little as 1 1/2“ away from a wall without risk of damage to the tool or pipe.
RED LITHIUM COMPATIBLE: This tool will function with the batteries in the Milwaukee M12 lineup. These include the 48-59-1201, 48-11-1970, 48-11-2401, 48-11-2430, 48-11-2460, 48-11-2420, 48-11-2402, and 48-11-2440.

Check Stock

Disconnect Clip Set for Pipe Fitting - Push Fitting Tool for Slip Removal - Disconnect Clip Removal Tool Set - 1/2", 3/4", 1/4", 3/8" and 1" Slip Fitting Removal Tools (Pack of 5)

: This push fitting removal tool does not require any additional materials or equipment for the installation process. Achieve a connection devoid of leakages in mere seconds..
- : This TigerBite plumbing tool can be used for a variety of different pipes. Whether you need to work on copper tubing, PEX fitting or CTS CPVC, this tool will work without any issues..
: The package of plumbing tools you receive includes a 1” disconnect clip, 1/4” disconnect clip, a ¾” disconnect clip, a 3/8” disconnect clip, as well as a ½” disconnect clip and a push-fit installation tip..
: With the help of this lead-free TigerBite plumbing tool set, you can re-use fittings and valves and even rotate the fixtures so that you can reassemble them to install them in tighter places..
: TigerBite fittings are certified up to 93 degrees Celsius and can be used at 200 PSI. They are also certified to ANSI/NSF T61 and ASSE 1061..

Check Stock

Hair Snake Drain Tool | Hair Clog Remover | Drain Opener for Sinks Tubs & Showers - Pack of 5 | Extra Long 22

WORKS LIKE A CHARM! - Green Gobbler’s Hair Grabber tool is the most effortless and reliable solution for easily removing hair and other blockages..
SAVE MONEY ON A PLUMBER - Don’t waste hundreds of dollars for a plumber to remove the hair clogging your drain. Save money by doing it yourself with....
REUSABLE OR DISPOSABLE - This hair grabbing tool is made of sturdy plastic material that can easily be rinsed off and re-used multiple times..
USE IN ANY HOUSEHOLD DRAIN - This tool is safe and compatible with all household drains, including: sinks, bathtubs, and showers!.
SAFE FOR ALL PLUMBING - Hair Grabber Tool clears drains of hair quickly and effectively, all while being safe for your plumbing system..

Check Stock

Burndy Y1MRTC Hytool Ratchet Crimper, Copper Hydent Terminals, Splices, and Thin-Wall C-Taps, 0.73' Width, 9-7/8' Length

【Hydraulic Power Driven System 】Different with similar hand tool that relies on leverage and hand power, our hydraulic copper tube fittings crimping tool is designed with hydraulic cylinder which is labor-saving. One person is totally enough to finish leak-free connections..
【Changeable Crimping Jaws 1/2", 3/4", 1"】 With a ball bearing springs inside the head, just simply slide in and out to change the crimping dies of different size to meet your various demand and make it the fastest solution for pipe maintenance and repair..
【360° Rotating Head】The rotating head makes the copper plumbing easier in some locations especially for Tee fittings..

Check Stock

EZRED 4S12L Silver Combination Stick Flexible Dual Ratchet with 1/4' Square Drive & Magnetic Bit Drive

Combo Ratchet: This 2-In-1 Slim Profile Ratchet Offers A 1/4” Square Drive On One End & A Magnetic Bit Drive On The Other. Both Heads Can Pivot & Lock 180 Degrees For Easy Access In Constricted Spaces..
Great For Tight Spaces: Our Easy To Access Custom Switches Allow You To Easily Change Direction & Knurled Thumb Wheels Give You Extra Precision On Torque. Great For Mechanics, Hvac Work, Plumbing & More..
Quality Hand Tools: We'Ve Got All Of Your Tool Needs Covered With Our Wide Array Of Scrapers, Pliers, Magnets, Wrenches, Hex Bit Sets, Pin Removers & Even Drive Head Replacement Kits For Ratchets!.
Innovation At Its Finest: We Make High Quality Hand Tools & Accessories, Tool Organizers, Ratchet Sets, Led Flashlights & Work Lights. We Specialize In Tools For Battery, Heating & Electrical Work, For Both The Professional Tradesperson And Home Diy'Er!.

Check Stock

Milwaukee 48229253 Constant Swing Copper Tubing Cutter 16-67mm

AUTOMATIC ADJUSTMENT: Wrap this around type K, L, and M copper pipes and it will adjust from between 3/8" and 1” automatically.
WATER RESISTANT: The head of the unit is sealed tightly to prevent water from leaking in and damaging the motor. Ideal for plumbing applications.
HIGH POWERED MOTOR works at up to 500 RPM, letting you work up to 10 times faster than standard hand-operated pipe cutters or saws.
LOW CLEARANCE: You can use this with piping that is as little as 1 1/2“ away from a wall without risk of damage to the tool or pipe.
RED LITHIUM COMPATIBLE: This tool will function with the batteries in the Milwaukee M12 lineup. These include the 48-59-1201, 48-11-1970, 48-11-2401, 48-11-2430, 48-11-2460, 48-11-2420, 48-11-2402, and 48-11-2440.

Check Stock

Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool

...ch effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool..
【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple..
【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
【Easy & Fast Remove】1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Ma....

Check Stock

SharkBite 1/4 Inch to 1 Inch Depth Gauge and Pipe Deburring Tool, Copper, PEX, CPVC, PE-RT, HDPE, U702A

SHARKBITE BRASS PUSH DEPTH GAUGE AND DEBURRING TOOL: SharkBite depth gauge and pipe deburring tool is ideal for deburring the outside of a copper pipe to remove any sharp sections or burrs.
marks the proper insertion depth for SharkBite plumbing fittings.
COMPATIBILITY: Deburring tool is compatible with 1/4 to 1-inch-sized PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
DURABLE: PVC deburring tool is composed of lightweight and durable plastic.
PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.

Check Stock

AMZCNC Copper Tube Fittings Hydraulic Pipe Crimping Tool with 1/2 ,3/4 and 1 Jaw Copper Pipe Propress Crimper Pressing Pliers

【Hydraulic Power Driven System 】Different with similar hand tool that relies on leverage and hand power, our hydraulic copper tube fittings....
【Changeable Crimping Jaws 1/2", 3/4", 1"】 With a ball bearing springs inside the head, just simply slide in and out to change the crimping dies of....
【360° Rotating Head】The rotating head makes the copper plumbing easier in some locations especially for Tee fittings..

Check Stock

Anbull Hydraulic Copper Tube Crimping Tool,Copper Pipe Fittings Crimping and Plumbing Tool with Crimping Dies Jaw 1/2 3/4 1

【Hydraulic Power Driven System 】Different with similar hand tool that relies on leverage and hand power, our hydraulic copper tube fittings....
【Changeable Crimping Jaws 1/2", 3/4", 1"】 With a ball bearing springs inside the head, just simply slide in and out to change the crimping dies of....
【360° Rotating Head】The rotating head makes the copper plumbing easier in some locations especially for Tee fittings..

Check Stock

QINXI 2pcs Small Adjustable Wrench 2.5 Inch Alloy Steel Open Shifting Spanner Mini Repair & Maintenance Hand Tool for Tightening or Loosening Nuts and Bolts

Made of high-quality carbon steel material, with a polished surface, strong and durable, not easy to rust and deform.
This adjustable wrenches are the ideal hand tool for all involved in mechanical, plumbing or general building work..
Applicable to industrial, machine repair, auto repair, electronic maintenance, bicycle maintenance, toys, crafts and home essential tools..

Check Stock