ReviewsPlumbing Repairs

ASHERMAN Chest Seal

  • Mainly Used for Iron and Steel Casting, Sand Holes and Pores, and Filling of Casting Defects Such As Cracks. It Can Be Used to Repair Fuel Tanks, Plumbing, Concrete Breaks, and a Whole Lot More.SILLENORTH.
  • Developed as an alternative to torch welding, it provides strong and long-lasting repairs to metals and multiple other surfaces. It will bond almost any clean surface that is free of dirt and oil..
  • After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded, and drilled after curing. It has a 1:1 mixing ratio, sets in 6 minutes, and fully cured in 4-6 hours. Before using the glue, clean and drying the surface and your work should be complete within 20 minutes after mixing..
  • Yout best solution in times of trouble.Repair cracked or damaged metals back to perfection with the Heat Resistance Metal Repair Adhesive! This should help make your DIY metal repairs easy and fast!.
  • The preparation and application are simple and easy. Just mix, apply, and let it dry for a few hours. The full cure time is up to 24 hours..
Check Stock

Roto-Rooter Build Up Remover

  • PROFESSIONAL STRENGTH Grease Trap Cleaner and Commercial drain opener..
  • SAVE MONEY & REPAIRS with GET SERIOUS Grease trap Treatment..
  • COMMERCIAL DRAIN CLEANER for slow draining sinks and lines. Keeps Grease Traps & Drains Flowing.
  • ENZYME DRAIN OPENER cleans the pipes before the grease trap, grease trap & pipes leaving the trap..
  • ELIMINATES OFFENSIVE ODORS Safe on Pipes & Plumbing..
Check Stock

SharkBite 1/2 Inch x 100 Feet White PEX-B, PEX Pipe Flexible Water Tubing for Plumbing, U860W100

  • PEX TUBING: Flexible water pipe tubing for potable water distribution systems.
  • minimum working temperature 33 degrees Fahrenheit at 160 PSI and maximum working temperature 200 degrees Fahrenheit at 80 PSI.
  • FLEXIBLE PEX PIPE: Line expands and contracts with temperature changes and is freeze resistant.
  • PUSH-TO-CONNECT: Use with SharkBite push-to-connect plumbing fittings or brass barb fittings using PEX crimp tool or clamp connections.
  • PREFERRED BY THE PRO: All SharkBite PEX tubing meets the same standards for commercial and residential plumbing applications.
  • PEX hose is great for repairs, and easy to cut with SharkBite shears.
  • MADE IN THE USA: All SharkBite connectors, adapters, and piping are manufactured and tested in the USA.
Check Stock

SharkBite 1 Inch x 100 Feet Orange PEX Pipe, Oxygen Barrier Flexible Water Tubing for Radiant Heating, U880O100

  • PEX RADIANT TUBING: Flexible oxygen barrier pipe tubing for radiant floor and hydronic heating applications.
  • minimum working temperature 33 degrees Fahrenheit at 160 PSI and maximum working temperature 200 degrees Fahrenheit at 80 PSI.
  • FLEXIBLE PEX PIPE: Line expands and contracts with temperature changes and is freeze resistant.
  • PUSH-TO-CONNECT: Use with SharkBite push-to-connect plumbing fittings or brass barb fittings using PEX crimp tool or clamp connections.
  • PREFERRED BY THE PRO: All SharkBite PEX tubing meets the same standards for commercial and residential plumbing applications.
  • PEX hose is great for repairs, and easy to cut with SharkBite shears.
  • MADE IN THE USA: All SharkBite connectors, adapters, and piping are manufactured and tested in the USA.
Check Stock

Instant Power Hair & Grease Drain Opener 1 L 3 Pack

  • PROFESSIONAL STRENGTH Grease Trap Cleaner and Commercial drain opener..
  • SAVE MONEY & REPAIRS with GET SERIOUS Grease trap Treatment..
  • COMMERCIAL DRAIN CLEANER for slow draining sinks and lines. Keeps Grease Traps & Drains Flowing.
  • ENZYME DRAIN OPENER cleans the pipes before the grease trap, grease trap & pipes leaving the trap..
  • ELIMINATES OFFENSIVE ODORS Safe on Pipes & Plumbing..
Check Stock

SharkBite 1/2 Inch Disconnect Tongs for Push to Connect Brass Plumbing Fittings, U711

  • SHARKBITE REMOVAL TOOL: 1/2 inch disconnect tongs allow for brass push connect fittings to be disconnected from the pipe quickly and easily.
  • can remove or adjust push to connect fittings in tight spaces for easy disassembly.
  • COPPER, PEX, CPVC, CTS, HDPE: SharkBite disconnect tong is compatible with copper tubing, CTS, CPVC, HDPE, and PEX fittings, and connects all three types in any combination, ideal for working in tight work spaces.
  • DURABLE AND HIGH QUALITY: Fitting remover is made with durable stainless steel and wide grip handles by a name you know and trust.
  • SharkBite's quality and performance are field-proven and trusted in the plumbing industry.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

Moen 93980 Replacement Handle Mechanism Kit for One-Handle Kitchen Faucet Repairs

  • INCLUDES: Moen 93980 Replacement Handle Mechanism Kit for One-Handle Kitchen Faucet Repairs.
  • REPLACEMENT PART: Ideal for repairing problematic plumbing fixtures without the need to replace them.
  • ORIGINAL EQUIPMENT MANUFACTURER: Authentic Moen replacement part.
  • PEACE-OF-MIND: Designed for hassle-free installation.
Check Stock

SharkBite 1/2 Inch Disconnect Clip for Push to Connect Brass Plumbing Fittings, U710A

  • SHARKBITE DISCONNECT CLIP: 1/2 inch disconnect clips allow for universal brass push connect fittings to be disconnected from the pipe quickly and easily.
  • can remove or adjust push to connect fittings with no tools, crimping, glue or soldering required.
  • COPPER, PEX, CPVC, CTS, HDPE: SharkBite disconnect clip is compatible with copper tubing, CTS, CPVC, HDPE, and PEX fittings, and connects all three types in any combination, ideal for working in tight work spaces.
  • DURABLE AND HIGH QUALITY: Fitting remover is made of durable and lightweight plastic with wide grip handles by a name you know and trust.
  • SharkBite's quality and performance are field-proven and trusted in the plumbing industry.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

Harbor Freight Tools 61377 HFT 1123 Plumber's Teflon Thread Seal Tape, 10 Rolls Per Box

  • No need to use sticky, messy pipe "dope" when you're remodeling or making plumbing repairs.
Check Stock

Stark 3PCS Aluminium Pipe Wrench Adjustable Jaw Plumbing Pipe Wrench (14\ 18\ 24\ inch) Pipe Wrench Set

  • Widely Application - Suitable for all pipe related home improvement repairs that need a tight grip, such as gas tank repair, household plumbing, vehicle maintenance. The deep grooved teeth of each straight pipe wrench lock in place to provide a confident grip around smooth, round surfaces like showerheads or bathroom sinks and drains.
  • Self-Cleaning Design - The pipe wrenches feature self-cleaning threads on the jaws and non-stick adjustment nuts that clean away grime from the hook jaw shank for reliable tool use.
  • Full Floating Forged Hook Jaws - The Stark pipe wrenches feature full floating forged hook jaws for superior gripping and quick adjustments when carrying out pipe work.
  • Lighter than Comparable Iron-Models - It delivers the unsurpassed durability and ease-of-use that all heavy-duty wrenches are known for.
  • 14" 18" 24" inch - The Wide Range of the Aluminum Straight Pipe Wrench is a plumbing wrench that offers professional strength and quality in a convenient, lightweight tool.
Check Stock

J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty - 2 oz.

  • J-B Weld Plasticweld: A Hand Mixable Two Part Epoxy Putty Stick That Is Formulated To Repair And Rebuild Various Plastic Compounds And Surfaces. J-B Weld Plasticweld Is Designed For Diy Plastic Repairs On Abs, Pvc & Cpvc Pipes And Plastics, Auto Bumpers And More! Plasticweld Is Certified By The Nsf And Is Safe For Contact With Potable Water.
  • Cure And Set Time: After Kneading The Two Part Formula Together By Hand, Plasticweld Takes 25 Minutes To Set And Cures In 3 Hours. J-B Weld Plasticweld Set And Cure Color Is Off White.
  • Product Features And Strength: J-B Weld Plasticweld Has Lap Shear Strength Of 600 Psi. Plasticweld Can Withstand Continuous Temperatures Up To 250Of (121Oc) And Intermittent Temperatures Up To 300Of (148Oc) When Fully Cured. Plasticweld Does Not Shrink And Can Be Molded, Shaped, Sanded, Drilled And Cut.
  • Applications: Abs, Pvc & Cpvc Pipes And Plastics, Auto Bumpers And Trim, Vinyl Surfaces And Siding, Marine Repairs & Fiberglass Parts, Plastic Water Tanks, And Plumbing.
  • Repair and rebuild any rigid and semi-flexible plastic including ABS, PVC and CPVC.
Check Stock