ReviewsPlunge Roundover Router Bits

SpeTool Spiral Downdcut Router Bits with 1/2 inch Shank, 1/2 inch Cutting Diameter Solid Carbide CNC End Mill for Wood Carving, Plunge Cut

  • Solid Carbide down cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/2” collet.
  • Industrial quality control to ensure best performance.
Check Stock

Upcut Spiral Flush Trim Router Bit, 1/4 Inch Shank Solid Carbide Flush Trim Router Bits Spiral with Nano Coated by EANOSIC (1/4\ Shank Up-Cut)

  • Professional Flush Trim Router Bit with Top Bearing: 1/4” Shank, 1” Cut Length. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use..
  • INDUSTRIAL QUALITY UPCUT FLUSH TRIM ROUTER BIT: Made of solid VIRGIN carbide with NANO blue coated. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • Up to 2.5X longer life compared to uncoated bits..
  • The 1/4-Inch flush trim Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp..
  • The spiral router bit suit for CNC router and any plunge routers with 1/4" collet..
Check Stock

SpeTool 1/4 Shank Carbide End Mill for Aluminum Cut (3 Flutes, 3.5 inch Long) Non-Ferrous Metal Upcut CNC Spiral Router Bit

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/2 inch Cutting Length, 3-1/2 inch for Total Length.
  • The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Carbide EndMill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool Spiral Router Bits with UpCut 3/8 inch Cutting Diameter, 1/2 Inch Shank HRC55 Solid Carbide CNC End Mill for Wood Small Cut, Carving

  • Solid Carbide spiral router bit with 1/2inch shank and 3/8inch cutting diameter, 5/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Extra Long End Mill for Aluminum 5/16in CNC Router Bits Metal Cutter 3-Flute Tools, 1-5/8in Flute Length, 4in Overall Length

  • Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-5/8 inch Cutting Length, 4 inch for Total Length.
  • The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Endmill Suit for CNC Router and Brand Plunge Router with 5/16" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Downcut Spiral Flush Trim Router Bit, 1/4 Inch Shank Solid Carbide Flush Trim Router Bits Spiral with Nano Coated by EANOSIC (1/4\ Shank Down-Cut)

  • Professional Downcut Flush Trim Router Bit with Top Bearing: 1/4” Shank, 1” Cut Length. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use..
  • INDUSTRIAL QUALITY DOWN-CUT FLUSH TRIM ROUTER BIT: Made of solid VIRGIN carbide with NANO blue coated. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • Up to 2.5X longer life compared to uncoated bits..
  • The 1/4-Inch downcut spiral flush trim Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp..
  • The downcut spiral router bit suit for CNC router and any plunge routers with 1/4" collet..
Check Stock

SpeTool 3 Flute Carbide End Mill for Aluminum Non-Ferrous Cutting Tool Upcut Bit for CNC Machine, 1/2 Inch Shank, Extra Long 4 Inch

  • Solid Carbide Spiral Router Bit with 1/2 inch Shank and 1/2 inch Cutting Diameter, 2 inch Cutting Length, 4 inch for Total Length.
  • The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Carbide EndMill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/2" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool Spiral Downdcut Router Bits Extra Long (4 inch) with 1/2 Inch Shank, 1/2 Inch Cutting Diameter Solid Carbide CNC End Mill for Wood Carving, Plunge Cut

  • Solid Carbide down cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 2 inch cutting length, 4 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/2” collet.
  • Industrial quality control to ensure best performance.
Check Stock

Roundover Router bit Set by TOOLDO ,1/4 inch Shank,4pcs Router bit Set,Bearing Guide for Rounding Edge bit (for R 1/8", 1/4", 3/16", 5/16")

  • TOOLDO 4pcs Roundover Router bit Set, 1/4 inch Shank,for R 1/8", 1/4", 3/16", 5/16".
  • The roundover router bit set uses premium C2 carbide inserts that are sharper and more durable.
  • The router bit set is light and compact, easy to carry, also suitable for home decoration polishing, perfect for light industry.
  • High-quality carbon steel, high-quality tungsten steel alloy, high-tech special grinding process, good blade strength, high hardness, sharp and wear-resistant, higher efficiency, providing clean and sharp cutting..
  • Creates smooth, rounded edges on boards and panels that require little sanding before painting.
Check Stock

SpeTool Extra Long CNC Spiral Router Bits with Up Cut 1/8 inch Cutting Diameter, 1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide End Mill for Wood Cut, Carving

  • Solid Carbide spiral router bit with 1/4inch shank and 1/8inch cutting diameter, 1 inch cutting length, 3 inch for total length.
  • For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Upcut Spiral CNC Router Bits with 1/2 Inch Shank , 1/2 Inch Cutting Diameter HRC55 Solid Carbide CNC End Mill for Wood Mortises and Cutting Dadoes Carving Engraving Tools

  • Solid Carbide Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/2” collet.
  • Industrial quality control to ensure best performance.
Check Stock