ReviewsPlywood Dado Bit

Aoasur Replaces DWE7402DI Dado Throat Plate - Compatible with DWE7490X, DWE7491RS, DWE7499GD and DWE7491X table saw versions for construction sites - Made from Impact-Resistant PC/PBT Blend Material

  • Complete replacement of DWE7402DI Dado Throat Plate -Allows the use of stacked wallboard cutters. Like the stock plate, this dado throat plate also comes with 4 adjustment screws. This exact replacement Job site table saw dado throat plate will fit and lock in place like the stock plate..
  • Dado Throat Board can be used with DWE7490, DWE7491, and other 10” Job site table saws and can be perfectly compatible like the original board - Fits perfectly on DWE7490, DWE7491, and DWE7491RS (Type 2) table saw models ..
  • Made from impact resistant PC/PBT blend material : This is no flimsy plastic. PC/PBT construction-grade material blends have high impact resistance, dimensional stability, heat resistance, and chemical resistance. Unlike other plastic blends, PC/PBT is rigid, tough, and strong..
  • Size: Length13 1/2" x Width3 11/16" xThickness7/16"，this throat plate is a universal fit for several 10-inch portable job site/contractor table saws that have dado capabilities. It can support up to an 8-inch diameter stacked dado that is up to 13/16 inches wide..
  • Contact us: If you have any questions, please click "Contact Seller" in the "Inquiry" or "Your Order" option on our storefront..
Check Stock

ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots 50 inch Clamp

  • ...tra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use..
  • Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides..
  • Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length..
  • How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on ....
Check Stock

ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots (36 inch Clamp)

  • ...tra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use..
  • Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides..
  • Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length..
  • How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on ....
Check Stock

Freud 95-100 5-Piece Cabinet Door Bit Set with 99-510 Panel Router Bit

  • Produces cabinet doors in over 39 molding patterns.
  • Cuts all composition materials, plywood, hardwood, and soft wood.
  • Wooden storage case keeps bits safe and clean.
  • Includes reversible glue joint bit, raised panel bit, rail and stile bit set and multi-profile bit.
  • Designed for use with a 1/2-inch shank table-mounted router with 3/4-inch stock.
Check Stock

miter gauge,table saw miter gauge aluminum alloy precision miter gauge for table saw 5/8 slot with miter gauge fence miter gauge miter gauge jig and fixture bar miter gauge table saw accessories

  • Ill-fitting dado throat plates can cause injury and equipment damage. This table saw dado throat plate will fit and lock in place like the stock plate. Also, like the stock plate, this dado throat plate also comes with 4 adjustment screws.
  • Please take note that the dado throat plate looks very similar to another throat plate model. Ensure that your table saw model is listed or meets all specifications.
  • Compatible with DeWalt 10" Portable Table Saw (DWE7490 DWE7491 DWE7491RS (Type 2) DWE7492 table saw models).
  • And with dimensions of 13 1/2" x 3 11/16" x 7/16.
Check Stock

ProGrip Straight Edge Clamps Ideal for Cutting Large Sheets of Plywood and Dado Slots All 3 Clamps 24 36 and 50 inch

  • ...tra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use..
  • Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides..
  • Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length..
  • How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on ....
Check Stock

Kobalt KT1015 Table Saw Motor Brushes Item 486267 Carbon Brush 2pcs 0486267

  • Ill-fitting dado throat plates can cause injury and equipment damage. This table saw dado throat plate will fit and lock in place like the stock....
  • Please take note that the dado throat plate looks very similar to another throat plate model. Ensure that your table saw model is listed or meets all....
  • Compatible with DeWalt 10" Portable Table Saw (DWE7490 DWE7491 DWE7491RS (Type 2) DWE7492 table saw models).
  • And with dimensions of 13 1/2" x 3 11/16" x 7/16", this throat plate is a universal fit for several 10" portable job site/contractor table saws that....
  • MADE FROM IMPACT-RESISTANT PC/PBT BLEND MATERIAL - This is no flimsy plastic. PC/PBT construction-grade material blends have high impact resistance,....
Check Stock

Sabre Tools CNC Spoilboard Surfacing Router bit Planer for Slab Flattening and Planing (1/2” S, 2” D, 1/2” H)

  • Dimensions – Shank: 1/2″, Diameter: 2″, Cut Height: 1/2″.
  • Multiuse – This woodworking router bit can be used as a CNC spoilboard surfacing bit or planing router bit with a slab flattening jig.
  • Our router flattening bit makes a great addition to any woodworker’s tool kit.
  • giving the ability to flatten large slabs or true up a new spoilboard.
  • Build – Spoilboard router bit features 4-wing construction made with hardened steel body. The ultra-sharp carbide tips provide smooth clean cuts.
  • Material – This router planer bit cuts softwood, hardwood, MDF, laminates, plywood, plastics, particle board. NOT FOR USE WITH METALS.
Check Stock

Andis Blade Care Plus Jar

  • Professional Flush Trim Router Bit with Top Bearing: 1/4” Shank, 1” Cut Length. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use..
  • INDUSTRIAL QUALITY UPCUT FLUSH TRIM ROUTER BIT: Made of solid VIRGIN carbide with NANO blue coated. And Nano Blue Coating with high hardness and heat resistance enables the tool’s cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • Up to 2.5X longer life compared to uncoated bits..
  • The 1/4-Inch flush trim Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp..
  • The spiral router bit suit for CNC router and any plunge routers with 1/4″ collet..
Check Stock

3/8 x 3/8 2FL HIGH SPEED STEEL, BALL NOSE, DOUBLE END MILL

  • Solid carbide spiral ball nose tapered router bit.
  • 2 flute, 1/4" shank, 1-1/4" cutting length, 0.5mm tip diameter, 5.2Deg, H-Si coating, 55HRC.
  • Mostly used for 2D/3D engraving work, detail carving.
  • The cnc router bit suit for wood like Plywood, OAK, MDF, and metail like alloy copper, have long service life for sharp.
  • This route bit suit for CNC router and and any brand plunge router with 1/4" collet.
Check Stock

3.5 Amp Heavy Duty Electric Cutout Tool HFJ14

  • 90 DAY WARRANTY AND SPLIT LEATHER WORK GLOVES (o.s.f.a.) INCLUDED W/PURCHASE.
  • Amperage (amps) 3.5 Maximum speed (rpm) 28000 RPM.
  • Accessories Included 1/8 in. and 1/4 in. collets, 1/8 in.high speed steel spiral bit.
  • Cut through wood, plywood, plastics and paneling with high speed steel spiral bit.
Check Stock