ReviewsPlywood For Boat Floor

ALEKO Inflatable Boats Heavy Duty Raft Fishing Boat Dinghy 320 Inflatable Deck Black

  • ALEKO 10.5 Ft Inflatable Boat with Air Floors in Black.
  • Boat Material: 0.9mm reinforced polyester and anti-corrosive PVC / Floor: Air mat floor with interlocking polyester - as durable and rigid as wood....
  • Max Load: 990 pounds / Max Persons: 4 people / Boat Net Weight: 112 pounds / Motor: Can accommodate up to 110 pounds.
Check Stock

GUTINNEEN Dog House Outdoor 100% Insulated, Heated Wooden Dog Kennel for Winter, Indoor Cat House Weatherproof-200% Thicker Than Normal Dog Crate(44.1" L)

  • 【6 Sides Heat Insulation to Lock the Temperature】Optimal cold and heat protection for your dog through insulation on all walls, roof and floor, this insulated dog house suitable for all seasons..
  • 【Fully Upgraded to 100% Roof Insulation】4 Layers perfect insulation through total 1.03" thick of roof, of which 0.12" thick of asphalt ,0.2" thick of plywood, 0.59" thick of Styrofoam,and 0.12" thick of plywood board..
  • 【4 Walls & Floor Insulation Protection Against Moisture and Cold 】With 0.47" thick of wood, 0.6" thick of Styrofoam inside, and 0.12" thick of plywood.200% THICKER than un-heated dog kennels!.
  • 【Well Thought Out】Aluminum door frame to prevent puppies from chewing on the kennel.Removable floor for easy cleaning.Adjustable feet balance on all types of surfaces for easy placement..
  • 【All-round Protection】Openable sloping roof repels rain and snow, PVC door curtain and windshield door get away from wind & rain to keep the inside of the dog crate dry and ventilation.
Check Stock

Inflatable Sport Boats Manta Ray 8.8' - Model SB-270-2022 Model - Aluminum Floor Premium Heat Welded Dinghy with Seat Bag

  • ...al engineers for rear buoyancy and faster planing at takeoff. "Easy Planing" extended rear pontoons and transom area allows for more maximum weight and larger motors with balanced stability. The 24 mm easy slide completely aluminum floor and seats are stronger, lighter, and more environmentally friendly than marine plywood and much easier to clean. Incredibly portable and easy to assemble or dissemble in 10 minutes..
  • All seams are HEAT WELDED and guaranteed to last in fresh water, salt water and extreme humidity. Eliminating the use of problematic glue and nose cones. The thick .9 mm, 1100 denier reinforced PVC material is UV, oil stain, and puncture restraint. White material protects against the suns heat, faded material and compares to heavy duty material used for white water river rafts..
  • Product ships COMPLETE. Includes: 1* aluminum bench seats / removable seat cushion and bag ($50 value) / 2 aluminum oars with lock-in holders / carry & storage bag / foot pump / 2 repair patches / one way drain plug / 1 front + 4 rear exterior heavy duty carrying handles / 2 front towing D-rings. 2018 Model Upgrades: All dinghies can handle up to 2 adjustable sliding bench seats and 2 additional handles inside the rear pontoon for easy 2 person carrying..
Check Stock

Inflatable Sport Boats Killer Whale 10.8 - Model SB-330-2022 Model - Aluminum Floor Premium Heat Welded Dinghy with Seat Bag

  • ...al engineers for rear buoyancy and faster planing at takeoff. "Easy Planing" extended rear pontoons and transom area allows for more maximum weight and larger motors with balanced stability. The 24 mm easy slide completely aluminum floor and seats are stronger, lighter, and more environmentally friendly than marine plywood and much easier to clean..
  • All seams are HEAT WELDED and guaranteed to last in fresh water, salt water and extreme humidity. Eliminating the use of problematic glue and nose cones. The thick .9 mm, 1100 denier reinforced PVC material is UV, oil stain, and puncture restraint. White material protects against the suns heat, faded material and compares to heavy duty material used for white water river rafts..
  • Product ships COMPLETE. Includes: 1* aluminum bench seats / removable seat cushion and bag ($80 value) / 2 aluminum oars with lock-in holders / carry & storage bag / foot pump / 2 repair patches / one way drain plug / 1 front + 4 rear exterior heavy duty carrying handles / 2 front towing D-rings. All dinghies come equipped with spots for 2 total aluminum bench seats. 2nd bench 95cm seat sold separately. Additional handles inside the rear pontoon for easy 2 person carrying..
  • USCG approved. Manufacturer Certification of Origin for ....
Check Stock

Bestway 65046E Hydro Force Caspian Pro 91 Inch Inflatable 2 Person Boat Raft Set with 2 Aluminum Oars and Hand for Lakes and Fishing

  • READY FOR THE WATER: The Caspian Pro Inflatable Boat Set with pair of 57 inch aluminum oars, hand pump, repair kit, 33-foot tow rope, and pressure gauge has all you need to hit the lake.
  • DURABLE DESIGN: Made of PVC material that provides superior strength, high density, sunlight resistance, and terylene support.
  • Inflated floor made from drop stitch material provides unparalleled strength and durability.
  • MOTOR MOUNT: Features a molded metal motor mount that holds motor (not included) with maximum power of 3 HP.
  • EASY ASSEMBLY: Easy to assemble, no additional tools needed.
  • Comes with 14.5 inch Air Hammer inflation pump and has quick inflation and deflation air valves.
Check Stock

Inflatable Sport Boats Shark 9.8 - Model SB-300-2022 Model - Aluminum Floor Premium Heat Welded Dinghy with Seat Bag

  • ...al engineers for rear buoyancy and faster planing at takeoff. "Easy Planing" extended rear pontoons and transom area allows for more maximum weight and larger motors with balanced stability. The 24 mm easy slide completely aluminum floor and seats are stronger, lighter, and more environmentally friendly than marine plywood and much easier to clean. Incredibly portable and easy to assemble or dissemble in 10 minutes..
  • All seams are HEAT WELDED and guaranteed to last in fresh water, salt water and extreme humidity. Eliminating the use of problematic glue and nose cones. The thick .9 mm, 1100 denier reinforced PVC material is UV, oil stain, and puncture restraint. White material protects against the suns heat, faded material and compares to heavy duty material used for white water river rafts..
  • Product ships COMPLETE. Includes: 2 aluminum bench seats ($80 value) / removable seat cushion and bag ($80 value) / 2 aluminum oars with lock-in holders / carry & storage bag / foot pump / 2 repair patches / one way drain plug / 1 front + 4 rear exterior heavy duty carrying handles / 2 front towing D-rings. All dinghies come equipped with spots for 2 total aluminum bench seats. 2nd bench 85cm seat INCLUDED with this model. Additional handles inside the rear pon....
Check Stock

Plywood Sheet Board, A Grade, 22 x 12 inch, 1.5mm Thick, Pack of 10 Unfinished for Crafts Basswood by Craftiff

  • 【MATERIAL】: Light, strong, economical with smooth creamy appearance. Composed of basswood surfaces and middle aspen wood layer – multi-ply composition ensures excellent strength and durability..
  • 【QUALITY】: Sanded laminated basswood plywood sheet - smooth, dimensions are exact while specific dimensional tolerances are strictly maintained within 5%. A/A grade grain classifications with minimal repairs and knots..
  • 【DIMENSION & PACKAGING】: Ten pieces of 22 x 12 inches (560*300 mm) with a thickness of 1/16 inches (1.5mm) plywood. The bundle of birch plywood is nicely protected with thick PE plastic bags to prevent damage during transportation. 100% satisfaction is guaranteed..
  • 【USAGE】: Laser marking and cutting friendly, high workability, and takes paint and varnish well. Ideal for all woodworking or craft projects.
  • Perfect for aircraft, boat, architectural model making, pyrography, painting, staining and etc..
  • 【DETAILS】: Saw is required for manual cutting, can be polished with sandpaper..
Check Stock

Sea Eagle MM3 Motormount for SE8 and SE9 Inflatable Boats

  • For use with Sea Eagle Inflatable SE8 and SE9 Boats models produced after 1985.
  • Solid yet light and easy to assemble. Marine grade hardwood plywood with waterproof glue, It can carry a 3 hp engine on the SE-9, and a 2 hp engine on the SE-8.
  • Gas motor 3 hp max (45 lbs. max weight, 20" shaft minimum).
  • Electric motor 70 lbs. thrust max (45 lbs. max weight, 26" shaft minimum).
  • Fits models produced after 1985. Motormount only. Boat not included..
  • Made with Marine grade hardwood plywood with waterproof glue.
Check Stock

VATO Dog Kennel, Waterproof Plastic Doghouse for Small Pets, Durable Puppy House with Door and Two Food Bowls, 22.8x20.9x22 Inches, Indoor and Outdoor, Lockable, Up to 30 LBS

  • 【6 Sides Heat Insulation to Lock the Temperature】Optimal cold and heat protection for your dog through insulation on all walls, roof and floor, this insulated dog house suitable for all seasons..
  • 【Fully Upgraded to 100% Roof Insulation】4 Layers perfect insulation through total 1.03" thick of roof, of which 0.12" thick of asphalt ,0.2" thick of plywood, 0.59" thick of Styrofoam,and 0.12" thick of plywood board..
  • 【4 Walls & Floor Insulation Protection Against Moisture and Cold 】With 0.47" thick of wood, 0.6" thick of Styrofoam inside, and 0.12" thick of plywood.200% THICKER than un-heated dog kennels!.
  • 【Well Thought Out】Aluminum door frame to prevent puppies from chewing on the kennel.Removable floor for easy cleaning.Adjustable feet balance on all types of surfaces for easy placement..
  • 【All-round Protection】Openable sloping roof repels rain and snow, PVC door curtain and windshield door get away from wind & rain to keep the inside of the dog crate dry and ventilation.
Check Stock

Newport Catalina Inflatable Boat - 12ft Marine Wood Floor,White/Gray

  • ...not pictured). Self bailing transom drain valve. Easy grab rope + splash guard around edge limits water spray inside boat,..
  • Premium quality: Hull made from high quality crisp white PVC fabric w/ UV treatment, .9mm/1100D. Floor made from aluminum framed marine grade coated plywood provides a solid and stable surface for standing, casting, and planing. Seams are HEAT WELDED using the latest technology,..
  • Dimensions & capacity: Model: Catalina. Length: 12ft 6 in. Tube diameter: 18 in, Inflated width: 66 in. Chambers: 3 + 1 keel. Max Power: 20HP. Max Engine Weight: 115 lbs. Outboard Shaft: Short 15”-17”. Max Load: 1519 lbs, Max Persons: 6!..
Check Stock

Inflatable Sport Boats White Water River Raft 12 feet

  • The 12-foot white water raft is designed with HEAT-WELDED heavy-duty PVC that is UV resistant to minimize heat and weathering..
  • The drop stitch air floor has our unique self-bailing “Sport DS Curves” that allows water to sneak through the side cracks to bail out of the raft while providing a ridged stiff floor platform for use. Never worry about standing water at the bottom of your raft again..
  • The bottom of the raft is re-enforced with thicker 1.2mm material and addition material chafers along the underside of the tubes. This helps protect the most vulnerable spots. There are also two chafers on top of the tubes for frame installation. The raft has spots for 3 thwarts total (Includes 2 thwarts with boat). Interior D-rings for a storage container and frame attachment points. D-rings surround the raft to add a lifeline rope (rope not included)..
  • Drop Stitch Air floor: Unique “Sport DS curve” design with 1.2mm heavy-duty material. Air Floor thickness: 6″ / Self-bailing boat / Bottom of boat (under the air floor insert): Black PVC 1.2mm re-enforced. The black PVC bottom with self-bailing holes under the air floo....
Check Stock