ReviewsPmg Standard Process

Wind Turbine Generator Kit 400W 12V Wind Generator Vertical Helix Wind Power Kit With Charge Controller Wind Power Kit For Marine RV Home, Windmill Generator Suit Hybrid Solar Wind System US Stock

  • 【 POWERFUL PERFORMANCE 】The vertical wind turbine adopts three-phase AC PMG, it boasts low torque, high-power tracking intelligent microprocessor that can effectively regulating the current and voltage. It obviously increases wind energy utilization and annual power generation..
  • 【 COMPACT & FIXED 】With dual bearings, the fan movement is more stable. Low vibration and low noise. In addition, with its compact shape, it has the lowest starting wind speed and a larger windward area, enabling it to generate electricity at lower wind speeds..
  • 【 HIGH QUALITY BLADES 】The blade material is synthetically injection molded with high-strength FRP material. At the same time, the fashionable spiral blade is also designed with aerodynamics to make the rotor run smoothly, reliably and quietly. Coreless PMG provides lower start torque/wind speed and longer service life. Maximum RPM protection ( No higher than 300RPM, regardless of the wind speed )..
  • 【 EASY TO INSTALL 】All things you need for installation are included. You can also get extra installation tool (two wrenches). Humanized and convenient flange design, easy to install and maintain. It is ideally suited for boats, gazebos, cabins or mobile homes, as well as for green windmills, home, corporate a....
Check Stock

ATIE Platinum Pool Cleaner Tire 370405Z Replacement Compatible with Pentair Kreepy Krauly Platinum Pool Cleaner Tire 370405Z 4 Pack

  • Fits Pentair Kreepy Krauly Platinum pool cleaners LL505PM and LL505PMG.
  • Replace Pentair Kreepy Krauly Platinum pool cleaner tire 370405Z.
Check Stock

Ettonsun Plastic Coin Storage Box Case for 20 Slab Coin Holders Fit for PCGS NGC PCCB PMGab Coin Holders (Blue)

  • The storage box can hold 20 coin slabs each..
  • Fit for PCGS, NGC, PMG, PCCB and Premier certified style coin holders, most coin holders less than 2.56" x 3.35" x 0.4"(Length*Width*Thickness) fit in this coin box..
  • Premium Material: High quality ABS plastic, Sturdy and durable, not easy to break or bend..
  • External Dimensions: 10.4" x 2.75" x 3.5"(L*W*H) when closed..
  • NOTE: No coins, capsules or bullion included with this item..
Check Stock

Standard Process Canine Renal Support 110 grams

  • Standard Process Canine Renal Support 110.
Check Stock

iShoot Improved Metal Lens Collar Tripod Mount Ring for Canon EF 70-200mm f/4L is/is II USM Canon EF 400mm f/5.6 L USM Canon EF 80-200mm f/2.8L Lens Built-in ARCA-Swiss Fit Quick Release Plate

  • The tripod mount ring is specially made for Canon EF 70-200mm f/4L USM Lens, Canon EF 70-200mm f/4L IS USM Lens, Canon EF 70-200mm f/4L IS II USM Lens, Canon EF 400mm f/5.6L USM Lens, Canon EF 80-200mm f/2.8L Lens.
  • The lens collar is referencing to and modified from Canon original standard design, bearing is enhanced, details are improved, and added the features of quick release plate.
  • High temperature die casting molding of Aluminum alloy, CNC processing, car paint on surface. Built-in 3M film, copper knob and stainless steel anti-skid nails.
  • The net weight of this lens support bracket is about 135g, inner diameter is about 65.5mm, width is about 18mm.
  • split-structure, bottom is 60mm length quick release plate, with 1/4" and 3/8" screw holes.
  • The lens holder bottom is 39mm Arca-Swiss fit Quick Release Plate, Compatible with RRS / ARCA-SWISS / WIMBERLEY / PMG / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT tripod ball head of Arca 39mm fit..
Check Stock

8TEN Chainsaw Chain 18 inch Bar .050 Gauge .325 Pitch 72 Drive Links for Husqvarna Poulan Pro Johnsered 1 Chain

  • Replaces OEM Part Numbers: Carlton K1C-072G, K1C-72E, Husqvarna 531300439, 501840972, H22 72, McCulloch PMG320GX, Stihl 23RM 72, Windsor 50J72, Oregon....
  • Compatible with Husqvarna Models: 133, 136, 137, 140, 141, 142, 154, 234, 235, 238, 240, 242, 246, 254, 257, 260, 261, 262 XP, 33, 336, 339 XP, 340,....
  • Compatible with Poulan/PoulanPRO Models: 235, 240 (.325 Pitch), 325, 404, S35. Fits Echo Models: CS-3600, CS-3900, CS-4000, CS-4100, CS-440, CS-450,....
  • Compatible with Jonsered Models: 110, 111, 2040 (.325 Pitch), 2041 (.325 Pitch), 2045 (.325 Pitch), 2050 (.325 Pitch), 2051 (.325 Pitch), 2054 (.325....
  • Compatible with Jonsered Models: CS 2152 (.325 Pitch), CS 2153 (.325 Pitch), CS 2156 (.325 Pitch), CS 2159 (.325 Pitch), CS 2163 (.325 Pitch), CS 2240....
Check Stock

Whirlpool 4392892 in-The-Wall Dryer Vent Periscope, Aluminum

  • Ensures Safety - Instantly reduces the risk of dryer fires in your home by eliminating kinked, lint-filled dryer flex pipe! Provides easy access for routine dryer vent cleaning!.
  • Increases Efficiency - Increases your dyer's efficiency saving you money and helping our environment!.
  • Saves Space - Reclaims lost inches of space in your laundry area caused by bulky dryer flex pipe while positioning your dryer tightly to the venting wall!.
  • Easy Installation - Simply slide the dryer into the rubber seal in the wall without reaching behind to make the connection and flush up the fronts of your washer and dryer.
  • Designed for installations with the dryer vent on the wall behind the dryer.
  • Made in the USA - ICC-ES PMG Listed ensuring code compliance and manufactured in the USA from high-heat ABS plastic coupled with a Sarlink gasket and stainless steel clamps.
Check Stock

LOYALHEARTDY Wind Turbine Generator 12V 400W Portable Vertical Helix Wind Power Turbine Generator Kit with Charge Controller - White

  • ☀【 HIGH QUALITY BLADES 】The blade material is synthetically injection molded with high-strength FRP material. At the same time, the fashionable....
  • ☀【 POWERFUL PERFORMANCE 】The vertical wind turbine adopts three-phase AC PMG, it boasts low torque, high-power tracking intelligent....
  • ☀【 COMPACT & FIXED 】With dual bearings, the fan movement is more stable. Low vibration and low noise. In addition, with its compact shape, it....
  • ☀【 EASY TO INSTALL 】All things you need for installation are included. You can also get extra installation tool (two wrenches). Humanized and....
  • ☀【 BEST SERVICE 】100% Refund Guarantee, please be assured the purchase. Our products are sent from the US and can be delivered quickly. If you....
Check Stock

Bike Disc Brake Frame Carbon Road Frameset Carbon Fiber Road ycle Frame Disc Brake Barrel Shaft 700C Front Fork S- Post Headset Rear-Wheel Convertible Quick Release(56cm)

  • [Premium Material]Ultralight carbon fiber material manufacturing. Professional manufacturing process fully meets the standard requirements, stable performance, long service life, safe and reliable..
  • [Firm]High-quality materials have a good sense of use and long life..
  • [Durable]Carbon Road Frameset, very durable lightweight carbon fiber, excellent hardness, no deformation, corrosion resistance..
  • [Nice Accessory]Road Racing Bike Frame is a wonderful accessories for road bike..
  • [Custom Service]Your satisfaction is our utmost concerm. If you have any questions about the product, please feel free to email us. Our customer service will try our best to give you a satisfactory answer within 24 hours..
  • [Premium Material]Ultralight carbon fiber material manufacturing. Professional manufacturing process fully meets the standard requirements, stable performance, long service lif....
Check Stock

iShoot Lens Tripod Mount Ring for Tamron 100-400mm f/4.5-6.3 Di VC USD A035 CNC Machined Lens Collar Support Bracket Holder Bottom is ARCA-Swiss Fit Quick Release Plate for Tripod Ball Head

  • This lens collar is tailor-made for Tamron 100-400mm f/4.5-6.3 Di VC USD (A035).
  • the tripod mount ring is referencing to and modified from Tamron original standard design, details are improved, quick release plate feature is added to the bottom, more practical than the original lens collar.
  • The lens support adopts lightweight design of hollow, with stainless steel screw, net weight is about 180g.
  • the inner diameter of the tripod ring is about 81.5mm, the width is about 18mm, with 3M film inside for protecting the lens from scratches.
  • The bottom of the lens bracket is 90mm detachable lengthening quick release plate, with 1/4” and 3/8” screw holes and stainless-steel anti-slip screws at the bottom.
  • The tripod collar mount ring is made of high quality Aviation Aluminum, lightweight and solid.
  • precisely machined by world-class high-end CNC turning center, surface anodic oxidation.
  • appearance and exquisite workmanship is much better than similar products made by mold.
  • This lens holder bottom Quick Release Plate is 39mm Arca-Swiss fit, compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / PHOTOCLAM / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64-FD ....
Check Stock

Kuupo H78 Chainsaw Chain 20 inch .325 Inch Gauge .050 Inch Pitch 78 Drive Links Full Chisel for Husquarvana 36 41 136 137 137E 141 142 141LE 142E 445 445E 450 450E Chainsaw - 1 PK

  • Pitch: .325", gauge: .050", drive link count: 78.
  • Replacement for Oregon 20BP078G, 20BPX078G, H22 78, 501840978, Echo 20BPX78CQ.
  • Replacement for Carlton K1C-078G, K1C-78E, McCulloch PMG320GX, Sabre 520, Stihl 23RM 78, 3632 005 0078, 23RM3 78, Windsor 50J78.
  • For saw sizes 38-62 cc including Oregon Craftsman, Homelite, Husquarvana, Poulan and Echo. (Please make sure your chainsaw's compatibility before purchase).
Check Stock