Grease Buster Tools Shop Size Pneumatic Piston
- A Pneumatic Piston accessory for your Shop Size Grease Buster.
- Use with a pneumatic hammer to clean clogged grease fittings and bearings with pneumatic pressure.
ReviewsPneumatic Cylinder Fittings
Build 19 Piece Pneumatic Kits with Technik Parts Contains Air Pump, Piston Pressure Rod, Cylinder,Pneumatic Hose &More,Great for DIY, MOC Tech, Compatible with Lego
- Custom MOC Tech Accessories: The kit contains 10 pneumatic accessories for a total of 19 pieces. There are 2 2x11 V2 cylinders, 2 1x11 V2 cylinder air pumps, 2 1x5 cylinder V2 pressure rods, 2 1x6 air pumps, 2 pneumatic switches, 2 pneumatic spring air pumps, 2 7L atmospheric pistons, 2 square floor air pumps , a 2m long pneumatic hose with 4mm outer diameter, 2mm inner diameter and 2 push rods. Note: Tube color is random..
- The technical parts are well sealed and airtight. The quality of the parts is comparable to the famous Danish building blocks..
- The MOC small particle building block kit is used to realize the hydraulic action at night and control the turning, grabbing, lifting and other functions of cranes, trucks, various engineering vehicles, military trucks, airplanes, robots and other models..
- We know that a perfect building block starts with the quality of the raw materials. The pneumatic kits are made of high-quality environmentally friendly ABS materials, and the building block parts are smooth and polished, so that each part fits well and has a smooth and comfortable grip, which is not easy to loosen. Compatible with other brands of small particle blocks..
TL TOOLEGIN Push to Connect Fittings 3/8" Tube OD x 1/4" NPT Male Air Line Fittings Air Hose Fittings Pneumatic Fittings DOT Air Fittings Air Compressor Quick Connect Fittings Brake Line Fittings 5pcs
- This 3/8" push to connect elbow fitting is designed for use in pneumatic systems, operates with a working pressure of vacuum to 250psi and temperature range of -40℉ to +200℉..
- Constructed with high-quality CA360 brass casting for long-lasting performance. Resistant to corrosion and rust, ensuring a leak-free connection for a long time..
- TL TOOLEGIN air line fittings meet rigorous safety standards with D.O.T FMVSS 571.106 certification, ideal for those seeking a durable and reliable solution for their pneumatic system needs..
- Easy to install, simply push the tubing into the air hose fitting to create a secure, leak-free connection. No tools, soldering, or crimping required. The fittings elbow has a compact design, allowing for flexible installation in tight spaces..
- Widely Used, these air brake fittings are suitable for a variety of fluid and air transfer applications, such as air compressors, pneumatic control systems, and vacuum systems..
40Pcs Plastic Quick Fitting 1/4 Inch Pneumatic Push Connector Pipe Tube Fitting Straight, Elbow Union, Y Union, Tee Union Connectors PU6,PV6,PE6,PY6 Parts for Air Hose
- [Good performance] Pipe body can rotate 360 degree even if installed, which is simple and flexible. High precision threads ensure its good sealing performance. It doesn't fall off under high pressure, safe and reliable..
- [Four models] Package includes four models of tube fittings: Straight Connector, Elbow Union Connector, Y Union Connector, Tee Union Connector. All models of push lock fittings are designed to suit your pneumatic piping needs..
- [Convenient] Release ring with oval design is more convenient to disassemble. Easy to install, no extra sealing requiring..
- [Application] Pneumatic quick connector is mainly used for quick connection of air piping, pneumatic tools, which can achieve pipe connecting or disconnecting without a tool requiring..
- [Features] This Pneumatic Push Connector can withstand the temperature of 0 to 60/32 to 140, the normal pressure range is from 0 to 0.9MPa..
5 Pieces Pneumatic Ball Valve Push to Connect Fittings Ball Valve PVC Air Flow Control Valve Air Fittings Straight Quick Connect Union Air Quick Connect Air Hose Fittings (1/4\ x 1/4\ OD)
- Size Information: you will receive 5 pieces of black air line valves, classic combinations can meet your daily use.
- At the same time, the size is 1/4 inch OD, please read our information sheet and consider whether the size fits.
- Quality Material: pneumatic fittings with reliable plastic materials and copper, not easy to fall off after connection.
- They don't break easily, and have nice sealing performance, not easy to leak.
- Air valve can be applied for a long time.
- Working Pressure: quick connect tube fittings can be applied to water (maximum pressure: 50 PSI) and air (maximum pressure: 145 PSI).
- When be applied with water, the pressure shall not exceed 50 PSI, and operating temperature: 32 to 140 Fahrenheit.
- Easy Operation: after installation, you can freely change the direction of the push to connect fitting without manually inserting or pulling.
- They are easy installation, flexible, save space, freely rotate, release ring ellipse design, easy disassembly.
- Wide Applications: quick connect air hose fittings are suitable for air duct, pneumatic tools and so on, you can use them to connect others and different pneumatic components.
- They are suitable for PU/ PA/ PE/ PVC products.
ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs
- Pneumatic Brake Oil Bleeding Tool: This brake bleeder kit is used for changing brake and clutch oil, as well as suck out old oil and air from replaced brake system on motorcycle car truck and pickup. Connect the extractor to the air compressor and brake caliper, turn on high power air compressor to 90-120PSI, negative pressure is generated in the braking system to suck out the waste fluid and air, and guide the new oil to fill the whole brake system..
- One Man Operation: Refill bottle can be held on the brake fluid reservoir. On the 1L waste oil extractor bottle, there is a the hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
- Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. ....
CEKER 1/2 Npt Elbow Push to Connect Fittings 3/8 inch Tubing to 1/2 npt Airline Push Fittings 3/8 Push in Connectors Quick Connect Air Tube Fittings 90 Degree Pneumatic Fittings 2Packs
- Type:3/8 Od x 1/2" Npt Thread Push to Connect Fittings.
- Made of quality plastic and stainless steel.
- 3/8 Od Air Fittings Fluid Admitted: Air, Water (No Freezing).
- Working Temperature: 0-60°C | 32～140°F.
- The 1/2 Airline Push fittings are available in various styles and models ,All models of push in connectors are designed to suit your pneumatic piping needs perfectly.
- Easy to install to 3/8 OD tubing and removed, even can change the tube connector direction after installation easily,360-degree rotate freely.
- The release ring of Pneumatic Air Tube 3/8 od Fittings conforms with the ellipse design to ensure that the disconnecting unit is in good shape.
JACO Industrial Quick Connect Air Hose Fittings | Plug & Coupler Kit - 1/4\ NPT (Set of 12)
- SHOP GRADE - performance tested & built to last from 100% solid brass & steel designed for all-day use working with air compressor tools, hoses, and airline accessories in the garage or shop..
- HIGH PRECISION - all fittings are built to 1/4 inch NPT industrial specs (Type D) for endless compatibility with your best air compressor tools & accessories (also called Type I/M)..
- QUICK CONNECTION - couplers feature heavy duty six ball bearing insert opening for quick, airtight, and hassle-free connection to plugs - spend less time connecting your air line tools & more time conquering your jobs..
- LEAK-PROOF - engineered with precision specs and applicable for home, commercial, and industrial use. All plugs & couplers will work with any size air hose or pneumatic tool that features 1/4 inch end fittings. All kits include a bonus thread seal tape roll..
- 100% Lifetime Warranty by JACO - never worry about needing the right size air fittings again. Trusted by mechanics & backed for life by our business with over 35 years of experience serving the pneumatic tools industry!.
Utah Pneumatic Dot Air Fittings Tee Union 1/4”Od 1/4” Npt Air Push Fittings Male Female brake tube fittings Push In Fitting D.O.T Approved For Sae Brake Line fittings Applications Pack Of 2
- Typical application: Air brake systems push dot fittings pneumatic fittings brass air brake fittings dot air line fittings.
- Maximum operating pressure of 150 psi dot air brake fittings air line fittings 1/4 dot push union dot compliant air line fittings.
- Temperature Range:_65°F to +250°F-40°C to +93°C push-to-connect fittings ptc air fittings push lock fittings.
- Material:CA360 ,CA377 brass push air fittings tee brass fitting airline tee fitting air fittings 1/4 dot.
MXBAOHENG Pneumatic Paint Mixer 13-66 Gallon 2500RPM Pneumatic Mixer Portable Industrial Ink Coating Mixing Tool Machine, with 4-INCH Galvanized Impeller
- 【Main Parameters】Power: 500W, Speed range: 2500RPM, Intake port: 1/4PT. The pneumatic paint mixer needs to be used together with air compressor. Suitable for Air compressor: power: above 3kw, working pressure: above 7kg/cm² (99.56PSI)..
- 【High Quality】This handheld pneumatic mixer has high-quality stirring rod and stirring blade.
- The mixing rod is corrosion-resistant, does not fade, and is easy to clean. The length of the stirring rod is 58CM/22.83inch, which can fully stir the pigment deposited at the bottom of the container.
- the stirring impeller is corrosion resistant, acid and alkali resistant, removable, etc..
- 【Heat Dissipation Function】This pneumatic paint mixer with porous design helps exhaust air and effectively protects internal working parts. The air intake from the air inlet drives the rotation of the fan blades to provide power for the machine, and then exits through the vent hole..
- 【Cylinder Motor】This pneumatic mixer is equipped with a cylinder motor, powerful, low noise and high efficiency. The motor speed is adjusted by the rotary switch. The higher the air pressure, the faster the speed. Can work in harsh environment, such as inflammable and explosive, dust, heavy load, humid workplaces, etc..
TAILONZ PNEUMATIC 10mm Bore 75mm Stroke Double-Rod Double-Acting Aluminum Pneumatic Air Cylinder TN10-75
- 【Product Name】Double-Rod Double-Acting Air Cylinder.
- 【Working Pressure:】0-1.0mpa | 0-145psi..
- 【Material】Made of aluminum alloy and metal, thickened cylinder body, high quality sealing rod, imported grease..
- 【About fittings】The air cylinder came with 4pcs 4mm (2Pcs) and 6mm (2Pcs) quick change hose fittings and the rod end fork to mount the cylinders,easy to install ,no need to purchase accessories separately..