ReviewsPneumatic Oil Filter

Aocoom-QingCang 6.5 Liter Oil Changer Vacuum Transmission Fluid Extractor Pneumatic/Manual Fluid Evacuator with Pump Tank Remover and Brake Bleeding Hose Engine Oil Change & Fluid Change Tool

  • 【2 USAGES】Pneumatic and manual mode to fit any condition. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with..
  • 【SPEEDY EXTRACTION】Fast extraction speed of 1.8L /min. The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode..
  • 【NO OIL LEFT】Vacuum Fluid Extractor comes with 4 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6.5L reservoir, 1*3.5 ft flexible hose and 3 * 3.39ft extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil..
  • 【EASY to USE】With oil extractor, you don’t have to get under the car anymore to do fluid changing and there is no mess to clean afterward. Just simply open the hook and insert tube to change engine oil..
  • 【WORK FREELY】Not limited to places, change oil at any time. Perfect for working on a car in the garage, also suitable for using outdoors on boats, truck, or lawn mowers..
Check Stock

NANPU 3/4 NPT Industrial Grade 3 Stage Air Drying System - Particulate Filter Coalescing Filter Desiccant Dryer & Air Regulator Metal Bowl Auto Drain Suitable for Paint Spray＆ Plasma Cutter

  • ... Element that can Remove 99.9% of Moisture, Smaller Particles and Oil, which Pass Through Stage 1 Combo. When the Filter Element needs to be Replaced, the Red Indicator will Pop Up..
  • 【Stage 3: Desiccant Air Dryer】The Desiccant Air Dryer allows the Air to be Thoroughly Dried and Cleaned before it Enters your Pneumatic Tools. The Desiccant Beads need to be Added to the Metal Bowl. When it needs to be Replaced, the Beads will Change from Blue to Pink..
  • 【Accessories】2 x 5 Micron Element(One of Them is Installed in the Product), 2 x 0.01 Micron Element (Same as Above), 4x 3.5oz (100g) Desiccant Beads Bag. 2 x 3/4" NPT Fittings, 1 x Thread Seal Tape..
Check Stock

NANPU 1/2 NPT Industrial Grade 3 Stage Air Drying System - Particulate Filter Coalescing Filter Desiccant Dryer & Air Regulator Metal Bowl Auto Drain Suitable for Paint Spray＆ Plasma Cutter

  • ... Element that can Remove 99.9% of Moisture, Smaller Particles and Oil, which Pass Through Stage 1 Combo. When the Filter Element needs to be Replaced, the Red Indicator will Pop Up..
  • 【Stage 3: Desiccant Air Dryer】The Desiccant Air Dryer allows the Air to be Thoroughly Dried and Cleaned before it Enters your Pneumatic Tools. The Desiccant Beads need to be Added to the Metal Bowl. When it needs to be Replaced, the Beads will Change from Blue to Pink..
  • 【Accessories】2 x 5 Micron Element(One of Them is Installed in the Product), 2 x 0.01 Micron Element (Same as Above), 4x 3.5oz (100g) Desiccant Beads Bag. 2 x 1/2" NPT Fitings, 1 x Thread Seal Tape..
Check Stock

BestEquip Portable 20L Grease Pump Set Electric 5 Gallon Air Operated Grease Pump with 20FT High Pressure Hydraulic Hose

  • Pneumatic Grease Pump: Capacity: 20 liters (5 gals).
  • Output Pressure: 30-40 MPA. Pressure Ratio: 50:1. Oil Volume: 0.75 L/Min. The pneumatic grease pump has a high working pressure that is capable of injecting oil into your vehicle quickly, perfect for the lubrication and maintenance of various vehicles..
  • 5 Gallon Capacity Storage: Made of chromium-vanadium steel and cast iron, the grease pump features high hardness and sturdiness. The 5-gallon large capacity allows you to put your oil drum directly into the machine without having to pour oil multiple times. The large quantity of oil it can hold will efficiently cut time in half, while also saving your energy..
  • 360° Universal Grease Gun: The gun head in the grease pump can rotate arbitrarily in multiple directions, meeting different positional needs without restrictions.The thickened suction cup can fit the barrel body without air intake and prevents oil leakage. Additionally, it provides a strong sealing performance, making it easier to discharge oil..
  • Refined Details for Effortless Use: The grease pump is equipped with an inverted U-shaped handle and four rollers, making it easy to operate and transport. Moreover, 12.5 ft wire pipe facilitates remote greasing. Buckles on both sides of the barrel....
Check Stock

Happybuy Grease Pump 5 Gallon Electric Grease Pump Air Operated Portable Grease Pump 0.85L Per Min High Pressure Grease Pump

  • Pneumatic Grease Pump: Capacity: 20 liters (5 gals).
  • Output Pressure: 30-40 MPA. Pressure Ratio: 50:1. Oil Volume: 0.75 L/Min. The pneumatic grease pump has a high working pressure that is capable of injecting oil into your vehicle quickly, perfect for the lubrication and maintenance of various vehicles..
  • 5 Gallon Capacity Storage: Made of chromium-vanadium steel and cast iron, the grease pump features high hardness and sturdiness. The 5-gallon large capacity allows you to put your oil drum directly into the machine without having to pour oil multiple times. The large quantity of oil it can hold will efficiently cut time in half, while also saving your energy..
  • 360° Universal Grease Gun: The gun head in the grease pump can rotate arbitrarily in multiple directions, meeting different positional needs without restrictions.The thickened suction cup can fit the barrel body without air intake and prevents oil leakage. Additionally, it provides a strong sealing performance, making it easier to discharge oil..
  • Refined Details for Effortless Use: The grease pump is equipped with an inverted U-shaped handle and four rollers, making it easy to operate and transport. Moreover, 12.5 ft wire pipe facilitates remote greasing. Buckles on both sides of the barrel....
Check Stock

1/4 Inch Air Adjusting Regulator Valve with Pressure Gauge and Water Trap Filter, 2 Packs, Oil Separator Water Pressure Regulator Air Compressor Regulator for Air Spray Paint Gun Air Pressure Cleaner

  • Small integration: you will receive 3 packs of air adjusting regulator valves, each including 3 parts, which are black part for air pressure regulators, blue part for water filter and the last part for stainless steel adapter.
  • Separating impurities: the transparent filter bowl allows a visual inspection of cumulative water and can filter airborne solid residues through a spring loaded valve at the bottom, such as pipe scale, rust, condensation from airlines.
  • Keep paintwork clean: air inlet measuring 1/4 inch and the overall length of 5.9 inch, the air compressor water separator kits fit into the paint gun and air compressor to prevent water, oil and impurities from polluting your painting work.
  • Safe and practical: with pressure regulator, you can see the working tool pressure clearly.
  • The sealing tape can be applied on thread part for nice prevention of air leakage.
  • Cleaning air passing through the pneumatic tools can extend the tool life span to some extent.
  • Wide applications: the air adjusting regulator valve is suitable for most spray tools and airlines, such as spray paint gun, air pressure cleaner, airline dryer and so on, which can be applied as a compact filter for air spray guns.
Check Stock

OEMTOOLS 24937 1.5 Gallon 6 Liter Pneumatic and Manual Fluid Extractor Manual and Pneumatic Oil Extractor Fluid Vacuum Extractor Vacuum Evacuator

  • Carefree Car and Boat Care: Easily remove engine oil, transmission fluid, power steering fluid, gear oil, coolant, and more with this versatile fluid....
  • Double Duty: For pneumatic extraction, insert the suction hose in the engine oil extractor receiving hole.
  • Manually suction fluid with the engine oil....
  • Don’t Cry Over Spilled Oil: The 1.5 gallon reservoir is a solid one-piece tank that can't leak out the bottom.
  • Time Flies: Draining oil from beneath a vehicle takes eons.
  • The oil pump extractor's 5 foot hose and dipstick adapter extracts automotive fluid....
  • Under Pressure: Change transmission fluid anytime with the pneumatic and manual pumping options.
  • This fluid extractor pump works at 85 PSI and a max....
Check Stock

3M Random Orbital Sander - Elite Series 28514, Air-Powered, Self-Generated Vacuum, 5 Inch, 3/16" Orbit

  • Precision-balanced steel workings and a powerful 0.28 HP motor offer optimal performance with less vibration in high production industrial environments.
  • Extended curved wrist support, 3M Gripping Material, and recessed lever provide maximum comfort and control during prolonged use.
  • Pneumatic power exceeds the capability of standard electric sanders, supplying hours of continual use.
  • 3M Hookit Clean Sanding Disc Pad (included) absorbs shock and vibration and provides a dust-free environment.
  • Self-generated vacuum sucks dust particles into a Clean Sanding filter bag where a HEPA-rated 3M filter securely contains them until disposal.
  • Precision-balanced steel workings and powerful air driven motors run smoothly with less vibration, ideal for high production industrial environments.
  • Improved durability, ergonomics and noise level maximize comfort and control for prolonged use.
  • HEPA rated Clean Sanding Filter Bags eliminate the need for vacuum hose and improve operator ease of use.
  • Aluminum body and durable composite cover reduce cracked housings and downtime.
  • Composite cover to prevent crack housings.
Check Stock

3M Random Orbital Sander - Elite Series 28517, Air-Powered, Self-Generated Vacuum, 6 Inch, 3/32" Orbit

  • Precision-balanced steel workings and a powerful 0.28 HP motor offer optimal performance with less vibration in high production industrial environments.
  • Extended curved wrist support, 3M Gripping Material, and recessed lever provide maximum comfort and control during prolonged use.
  • Pneumatic power exceeds the capability of standard electric sanders, supplying hours of continual use.
  • 3M Hookit Clean Sanding Disc Pad (included) absorbs shock and vibration and provides a dust-free environment.
  • Self-generated vacuum sucks dust particles into a Clean Sanding filter bag where a HEPA-rated 3M filter securely contains them until disposal.
  • Precision-balanced steel workings and powerful air driven motors run smoothly with less vibration, ideal for high production industrial environments.
  • Improved durability, ergonomics and noise level maximize comfort and control for prolonged use.
  • HEPA rated Clean Sanding Filter Bags eliminate the need for vacuum hose and improve operator ease of use.
  • Aluminum body and durable composite cover reduce cracked housings and downtime.
  • Composite cover to prevent crack housings.
Check Stock

Sta-Lube Air Tool Oil SL2533-1 Gallon, Anti-Corrosive Lubricant for Pneumatic Equipment & Tools

  • STA-LUBE: Sta-Lube offers a range of high performance industrial greases, gear oils, service oils, fluids, hand cleaners, additives, and lubrication formulas. Our products have been rigorously tested to meet the highest quality standards..
  • PNEUMATIC TOOL OIL: This oil is recommended for lubricating pneumatic equipment and tools like impact wrenches, air ratchets, sanders, grinders, air motors, hammers, and drills. .
  • INCREASES TOOLS LIFESPAN: Our anti-corrosive tool oil contains solvents that break down deposits, while the oil lubricates the tool. Preventing rust and corrosion results in an extended lifespan of the tools. .
  • ENHANCES PERFORMANCE: Specially formulated with rust inhibitors, our Sta-Lube Air Tool Oil maximizes your tool's performance. .
  • PRODUCT SPECIFICATIONS: Sta-Lube Air Tool Oil Lubricant is available in a 1 gallon or 3.785 L bottle, and is made in the USA..
Check Stock

5\ EXTENSION PNEUMATIC POWER POWERED EXTENDED LONG SHAFT AIR DIE GRINDER TOOL

  • 1/4” Air straight Die grinder-This air die grinder features a straight head, equipped with a 1/4” collet and a 1/8” collet, which could hold a variety of grinding bits, ideal for all kinds of materials. This pneumatic die grinder has a special latch attached to the trigger mechanism that acts as a child safety lock to prevent the tool from accidentally starting up. Note: Please remove the DUST PLUG before insert the air connector..
  • Light-Weight & Ergonomic Designed Body - The air die grinder features a slim design and has a lightweight (0.72 lbs) but durable and solid body, comfortable to maneuver and perfect for one-handed grip. The ergonomically designed body is comfortable to hold for long work sessions..
  • High Free Speed - The Pneumatic straight die grinder operates at a maximum speed of 25,000 RPM continuous power with an air compressor, which allows for precision cutting, grinding, shaping, and sanding. Operating pressure: 90psi (6.3bar). Air consumption: 85.5l/min (3cfm). Note: Use sealant tape to avoid air leakage..
  • Rear Exhaust - A rear exhaust makes the lower sound level possible, while also ensuring that the exhaust isn't hitting the operator in the face. The air inlet filter could keep the die grinder from contamination. Note: Add oil r....
Check Stock