ReviewsPneumatic Punch

43300 Pneumatic Fan Clutch Wrench Set Removal Tool Kit Gear Assisted Positioning Tool for Ford GM Chrysler by Lucky Seven

  • 43300 Pneumatic Fan Clutch Wrench includes 7 driving wrenches that fit Ford, GM, Chrysler & Jeep. Set now includes 7/8", 32mm, 36mm, 40mm thin and new 47mm size to fit Ford 6. 0L and 6. 4L Power stroke diesel pickup. 1-7/8"and 2" are still included in the set. 1-1/2" 41mm and 42mm are still available individually..
  • 43300 Pneumatic Fan Clutch Wrench Set ，Package included:1 * 43370 handle+1 *43380 32mm driving wrench+1 *43390 36mm driving wrench+1 *43440 40mm driving wrench+1 *43530 47mm driving wrench+1 *43430 7/8" driving wrench+1 *43410 1-7/8" driving wrench+1 *43420 2" driving wrench.
  • 43300 Pneumatic Fan Clutch Wrench Kit,43300 pneumatic fan clutch,Fan clutch installer/remover set,Quickly removes and installs fan clutch when repairing the water pump or fan clutch.Faster and easier than conventional fan clutch wrenches. No holding wrench is necessary..
  • 43300 Pneumatic Fan Clutch Wrench AKA Fan clutch removal tool kit,43300 pneumatic fan clutch wrench set,for 43300 lisle,43300 wrench set,43300 fan clutch tool,43300 pneumatic fan clutch,for lisle 43300 pneumatic fan clutch wrench set,....
Check Stock

60 Pieces Push Air Fittings Include 1/4 Inch OD Push to Connect Fittings Pneumatic Fittings Kit with 1 Black 1/4 Inch OD Nylon Air Tubing, 15 Spliters 15 Elbows 15 Tee 15 Straight

  • Package includes: you will receive 15 straight PU 1/4 inch pneumatic connectors and 15 elbow PV 1/4 inch pneumatic connectors and 15 PY 1/4 inch pneumatic connectors and 15 T-type PE 1/4 inch pneumatic connectors (black blue) and 1 roll of 1/4 inch OD black pneumatic nylon tube 33 ft (approx. 10 m), a nice combination for easy use and replacement of your daily life.
  • Size details: the tube outer diameter is about 1/4 inch, 4 types of pneumatic connections and a roll of 10 m (33 ft) 1/4 inch OD black pneumatic nylon tubing, the right size for your pneumatic piping needs.
  • Practical design: the air line fittings release ring of the 1/4 inch pneumatic air line fits the ellipse design to ensure that the disconnect device is in a nice shape, which can provide sealing performance, maximum pressure is 0~145 Psi, operating temperature is 32~140 degree Celsius.
  • Easy to install: the 1/4 inch pneumatic connector is easy to install and remove on 1/4 OD pipe, even easy to change the direction of the pipe connector after installation, suitable for PU/ PA/ PE/ PVC pipe.
  • Reliable material: these pneumatic connectors are made of quality plastic and stainless steel, corrosion resistance and ductility, which can serve you for a long time, and bring you a nice use experience.
Check Stock

Ingersoll Rand 9500 Chisel Bit Kit for 114GQC Edge Series Air Hammer, 5 Piece Set Includes Tapered Punch, Flat Chisel, Panel Cutter, Sheet Metal Cutter, Spot Weld Breaker

  • PREMIUM SET: This pneumatic hammer chisel kit includes a set of 5 chisels made of high quality steel to provide the best in quality, strength, and durability.
  • CHISELS INCLUDED: This 5-piece set includes the following chisels: tapered punch, flat chisel, panel cutter, sheet metal cutter, and spot weld breaker.
  • USE WITH: Pair these chisels with your Ingersoll Rand 114GQC Edge Series Air Hammer.
  • RELIABILITY: Built to handle harsh environments, these chisels have undergone rigorous testing to ensure long-lasting performance.
  • INGERSOLL RAND DIFFERENCE: For more than 100 years, Ingersoll Rand’s advanced engineering, manufacturing, and service models have set a standard of excellence.
  • Trust Ingersoll Rand to help you complete your work faster and easier than ever before.
Check Stock

Water Oil Separator Filter Airbrush Filter Moisture Separator for Air Line Compressor Fitting, 1/4 Inch NPT Inlet and Outlet (3)

  • ...oncave) is the "outward" side of the airflow, and the connector side (convex) is the inlet for the airflow, they are easy to install and ergonomically designed for your convenience and ease of use.
  • General import export :standard universal male and female 1/4 inch NPT inlet and outlet designs make it easy to connect pneumatic lines to pneumatic tools and airbrush to accommodate most pneumatic tools for convenience.
  • Sturdy material: the water oil separator is made of polycarbonate housing, aluminum valve body and solid brass fittings, it has good anti-oxidation performance, which greatly improves the durability and reliability of the tool and prolongs its service life.
  • Extend tool life: clean air is essential in pneumatics, this filter can not only be applied as a water separator for air compressors, but also effectively trap oil and dust, so only clean air can to pneumatic tools.
  • Greatly reduce the disposal of worn airbrush and other pneumatic tools, effectively extending the life of pneumatic tools.
  • Suitable applications: the water and oil separator can be directly connected to paint airbrush, air compressors and other pneumatic tools.
  • It can be applied with airbrush, pneumatic tools and hoses, capable of capturing water vapor and oil particles entering....
Check Stock

Mayhew 62254 Pro Pilot Punch Kit, 12-Piece

  • Pilot punches, an original Mayhew patented design, also called a roll pin punch, are a punch that fits tightly within a roll pin.
  • Drives and removes roll pins and other hollow tension pins.
  • Black oxide finish for additional rust protection.
  • 12-Piece Set includes: 1/16 x 2-3/4" Pilot Punch, 5/64 x 3/14" Pilot Punch, 3/32 x 3-1/2" Pilot Punch, 1/8 x 4" Pilot Punch, 5/32 x 4-1/2" Pilot Punch, 3/16 x 4-1/2" Pilot Punch, 7/32 x 5" Pilot Punch, 1/4 x 5-1/2" Pilot Punch, 5/16 x 6" Pilot Punch, 3/8 x 6" Pilot Punch, 7/16 x 6" Pilot Punch, 1/2 x 6" Pilot Punch.
Check Stock

Acuteye 33FT/10Meters Pneumatic Air Tubing, 10mm OD x 6.5mm ID PU Polyurethane Air Compressor Tube Hose Pipe For Air Compressor Fitting or Fluid Transfer (Black)

  • Pneumatic Tubing Pipe Size: 3/8" (Outer diameter) X 1/4" (Inner diameter). Product Total Length:33 Feet (10meters).
  • Pneumatic Tubing Material: PU ( Poly Urethane ),has high elasticity to restore memory effect. Flexible.
  • Burst Pressure: 2.5Mpa(363Psi).Tubing Pipe Working Temperature: -4℉-176℉（-20℃--80℃),） Stretch Resistance: 400kg/cm2.
  • Application: air, water, chemicals, lubricants, instrument lines, irrigation control systems, textile mills, food plants, vehicles and ships fuel delivery pipe, vacuum systems, air conditioning systems, cars, And hydraulic brake system, oscillation insulator and other industries. Pneumatic pneumatic tools.
  • Application Range: Pneumatic pneumatic tools.
Check Stock

Simlug Mini Air Pneumatic Cylinder, Cdj2B10-30B 10Mm Diameter 30Mm Stroke DoubleActing Stainless Steel Pneumatic Air Cylinder

  • The pneumatic actuator, The pneumatic cylinder is a mechanical devices which use the power of compressed gas to produce a force in a reciprocating linear motion..
  • The pneumatic air cylinder, Made of high quality stainless steel, the pneumatic cylinder has long service life..
  • This is a double-acting cylinder which uses the force of air to move in both extend and retract strokes..
  • It has 10mm cylinder diameter and 30mm stroke, the pressure is 0.15Mpa~1Mpa..
  • Pneumatic cylinder is quieter, cleaner, and do not require large amounts of space for fluid storage..
Check Stock

SRC40 Swing Clamp Cylinder 90 Degrees Large Rotary Actuator Pneumatic Clamping Cylinder (SRC40x90L)

  • Excellent Material: This pneumatic swing clamping cylinder is made of pure aluminum block through CNC machining center, non-die-casting aluminum, high density and high strength, support long time work..
  • Hard Oxidation Treatment: The mirror inner wall surface of this pneumatic swing clamping cylinder is hard anodized to prolong the service life of the cylinder..
  • Protective Layer: The hard protective layer of this pneumatic swing clamping cylinder is not easy to be worn, not easy to be corroded, and can be used in harsh working environments..
  • Features: This pneumatic swing clamping cylinder has high consistency of water inlet and outlet, quick joint installation, and is not easy to leak.
  • left-turn-L and right-turn-R are optional..
  • Use Pressure Range: The pressure range of this pneumatic swing clamping cylinder is 1-7kgf/cm(Kpa)..
Check Stock

Ultra Punch Needle Sampler Pattern

  • High Quality Rug Punch Needle Kit: The needle punch embroidery & screw eye (loop 1,4 IN) are constructed of electro-polished stainless steel, making this embroidery stitching punch needles long-lasting and reducing friction between the punch needle threaders and fabric..
  • Wooden Punch Needle Handle: The handle of this embroidery punch needle starter set is constructed of wood & designed to be easy grasp. This ultra punch needle rug kit features a 4" length & smooth surface that is comfortable to hold, making your embroidery job easier..
  • Punch Needle Embroidery: The embroidery pen punch needle set is simple to use and will come in handy for your DIY embroidery. The magic needle threader for hand sewing create textured 3-dimensional pieces to embellish your garments, pillows and quilt cover..
  • Application of Needle Punch Tool: You may use these easy stitch embroidery punch needle for whatever embroidery project you choose, including creating costumes, wallets, towels, and other typical household items. Wool and thick fibers are suitable for this large punch needle.
  • Perfect Gift: The stitching punch needle tool is used for sewing & embroidery projects, as well as curtains & other manual DIY projects. You may create any textile item, making this wooden handle ....
Check Stock

Pneumatic clamp, G18 pneumatic sealing clamp Easy to use Wide application for machining

  • Wide Range of Uses: Widely used in home decoration, equipment installation, mechanical operation, welding, mold and other industries..
  • Iron Material: Pneumatic clamp is made of high quality iron material, sturdy, durable and, exquisite workmanship, beautiful appearance..
  • Improve Production Efficiency: Cylinder Pneumatic hold down clamp can shorten test time and improve production efficiency..
  • Realize Automatic Control: Cylinder pneumatic hold down clamp is easy to operate and easy to implement automatic control..
  • Ensure Machining Accuracy: Pneumatic clamp can reduce the labor of workers, help ensure workpiece machining accuracy..
Check Stock

Pneumatic Clamps Pneumatic Clamp 300mm GH-12130 Professional Cylinder Pneumatic Hold Down Clamp

  • ...ference mechanics and dynamics design and the overall structure is ergonomic that the thin, compact fixture is suitable for narrow working spaces. With a total length of 300mm and a maximum clamping force of 230 kg,the Clamp helps to ensure the machining accuracy of the workpiece..
  • 【operate easily】 This Cylinder Pneumatic Clamp provides a smoother operation during repeated clamping operations than manual clamps. The intake port size is M10.The maximum working pressure is 9Kgf / cm2 (0.9mpa) 100PSI, and the movable distance of the clamping rod is 60mm / 2.3in, The Pneumatic Clamping Tool operate easily, and it is easy to realize automatic control..
  • 【Improve efficiency】This Pneumatic Hold Down Clamp is used for positioning, clamping workpiece station. It is powered by compressed air and has the characteristics of labor saving, energy saving and environmental protection. It can shorten test time,and improve production efficiency which reduce labor intensity of workers.Pneumatic clamp is easy to operate and easy to implement automatic control..
  • 【Application】 This Pneumatic Lever Clamp is used for mass production, and the workpiece station that needs to be positioned and clamped can be used. It is commonly used in stations such as welding, gages,....
Check Stock