ReviewsPneumatic Springs

43300 Pneumatic Fan Clutch Wrench Set Removal Tool Kit Gear Assisted Positioning Tool for Ford GM Chrysler by Lucky Seven

  • 43300 Pneumatic Fan Clutch Wrench includes 7 driving wrenches that fit Ford, GM, Chrysler & Jeep. Set now includes 7/8", 32mm, 36mm, 40mm thin and new 47mm size to fit Ford 6. 0L and 6. 4L Power stroke diesel pickup. 1-7/8"and 2" are still included in the set. 1-1/2" 41mm and 42mm are still available individually..
  • 43300 Pneumatic Fan Clutch Wrench Set ，Package included:1 * 43370 handle+1 *43380 32mm driving wrench+1 *43390 36mm driving wrench+1 *43440 40mm driving wrench+1 *43530 47mm driving wrench+1 *43430 7/8" driving wrench+1 *43410 1-7/8" driving wrench+1 *43420 2" driving wrench.
  • 43300 Pneumatic Fan Clutch Wrench Kit,43300 pneumatic fan clutch,Fan clutch installer/remover set,Quickly removes and installs fan clutch when repairing the water pump or fan clutch.Faster and easier than conventional fan clutch wrenches. No holding wrench is necessary..
  • 43300 Pneumatic Fan Clutch Wrench AKA Fan clutch removal tool kit,43300 pneumatic fan clutch wrench set,for 43300 lisle,43300 wrench set,43300 fan clutch tool,43300 pneumatic fan clutch,for lisle 43300 pneumatic fan clutch wrench set,....
Check Stock

60 Pieces Push Air Fittings Include 1/4 Inch OD Push to Connect Fittings Pneumatic Fittings Kit with 1 Black 1/4 Inch OD Nylon Air Tubing, 15 Spliters 15 Elbows 15 Tee 15 Straight

  • Package includes: you will receive 15 straight PU 1/4 inch pneumatic connectors and 15 elbow PV 1/4 inch pneumatic connectors and 15 PY 1/4 inch pneumatic connectors and 15 T-type PE 1/4 inch pneumatic connectors (black blue) and 1 roll of 1/4 inch OD black pneumatic nylon tube 33 ft (approx. 10 m), a nice combination for easy use and replacement of your daily life.
  • Size details: the tube outer diameter is about 1/4 inch, 4 types of pneumatic connections and a roll of 10 m (33 ft) 1/4 inch OD black pneumatic nylon tubing, the right size for your pneumatic piping needs.
  • Practical design: the air line fittings release ring of the 1/4 inch pneumatic air line fits the ellipse design to ensure that the disconnect device is in a nice shape, which can provide sealing performance, maximum pressure is 0~145 Psi, operating temperature is 32~140 degree Celsius.
  • Easy to install: the 1/4 inch pneumatic connector is easy to install and remove on 1/4 OD pipe, even easy to change the direction of the pipe connector after installation, suitable for PU/ PA/ PE/ PVC pipe.
  • Reliable material: these pneumatic connectors are made of quality plastic and stainless steel, corrosion resistance and ductility, which can serve you for a long time, and bring you a nice use experience.
Check Stock

Water Oil Separator Filter Airbrush Filter Moisture Separator for Air Line Compressor Fitting, 1/4 Inch NPT Inlet and Outlet (3)

  • ...oncave) is the "outward" side of the airflow, and the connector side (convex) is the inlet for the airflow, they are easy to install and ergonomically designed for your convenience and ease of use.
  • General import export :standard universal male and female 1/4 inch NPT inlet and outlet designs make it easy to connect pneumatic lines to pneumatic tools and airbrush to accommodate most pneumatic tools for convenience.
  • Sturdy material: the water oil separator is made of polycarbonate housing, aluminum valve body and solid brass fittings, it has good anti-oxidation performance, which greatly improves the durability and reliability of the tool and prolongs its service life.
  • Extend tool life: clean air is essential in pneumatics, this filter can not only be applied as a water separator for air compressors, but also effectively trap oil and dust, so only clean air can to pneumatic tools.
  • Greatly reduce the disposal of worn airbrush and other pneumatic tools, effectively extending the life of pneumatic tools.
  • Suitable applications: the water and oil separator can be directly connected to paint airbrush, air compressors and other pneumatic tools.
  • It can be applied with airbrush, pneumatic tools and hoses, capable of capturing water vapor and oil particles entering....
Check Stock

ARES 15050-3-Piece Internal Coil Spring Compressor Kit - 4.17-Inch to 11.54-Inch Telescoping Spindle - Discs Cover Internal Spring Diameters Over 2.95 Inches and External Diameters Under 6.1 Inches

  • ...inating guesswork. The included discs work on springs with an internal diameter over 2.95 inches and an external diameter under 6.1 inches. The telescoping spindle has adjusts to any length between 4.17 inches and 11.54 inches..
  • DESIGN CONSIDERATIONS: This kit is made of high quality steel and safe for use with your pneumatic or impact wrench, saving you time during spring compression. A built-in locking pin design ensures a secure connection between the spindle and discs, so you can compress with confidence. The discs' design also compresses coils more evenly and more safely than compressors with a jaw design. The set includes a high quality storage case to store your tools when they're not in use!.
  • APPLICATIONS: This set is compatible with Alfa Romeo, compatible with Audi, compatible with BMW, compatible with Chevy, compatible with Citroen, compatible with Fiat, compatible with Ford, compatible with Honda, compatible with Hyundai and Kia, compatible with Lancia, compatible with Mazda, compatible with Mercedes, compatible with Mitsubishi, compatible with Nissan, compatible with Toyota, compatible with Volvo, and compatible with Tesla. Download our manual for full compatibility details..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality t....
Check Stock

Folding Lifting Frame 1 Pair Gas Hydraulic Lift up Hinge Mechanism for Furniture Lifting Mechanism of Coffee Table Multi-Functional Pneumatic Lifting Bracket (Gas Strut Lifting Bracket)

  • High quality material：Made of heavy duty steel material, anti-rust and corrosion-resistant, durable and sturdy to use, not easy to bend and break.
  • Super load capacity：Our products can carry about 50kg / 100lb, so it is used as a large lifting table hardware. It supports slow lifting and folding, opening and closing, so it is safe and easy to operate, just enjoy family life..
  • Multifunctional: Lift up coffee table can turn your normal coffee table into a functional coffee table, you can lift up top table to get a variety uses of the needs, such as dining, writing, meetings, etc..
  • Space saving: Pneumatic gas spring coffee table lifting frame make much space for your coffee table, help you save space that make you home more clean and tidy, perfect for your project..
  • Package includes: 2 PCS coffee table desktop folding lifter with 2 springs.
Check Stock

Gazeer 6 Pcs 100N/22.5lb Gas Strut 10inch Gas Struts Lift Support Cabinet Door Lift Pneumatic Support

  • Length(ball hole center to ball hole center): 10 inches(As shown in the picture), Package included: 6 X 100N Gas Struts and 30 X Screws ,Installation Manual..
  • 2.Round metal mounting plate, contact with the counter area is larger, three-point positioning, installation more solid. Full copper oil seal, full buffer design, solid design to ensure long-term use is not deformed, not rust..
  • 3.Gas Springs are ideal motion control devices for lifting, holding, counter balancing, and providing support for applications such as horizontally hinged doors, lids, hoods and canopies. Suitable for cupboards, bookcases, wardrobes, windowsill or platform etc,upside support..
  • 4.Please do not use lubricating oil or similar things.it can interrupt the reaction of the Braking Arm. Please put the fixing plates well-aligned on the stuff.Support opens lids to a maximum angle of 90 degrees..
  • 5.Please note: This Lift Pneumatic Support is only suitable for PUSH-UP door（As shown in picture ）,Not applicable to PULL-DOWN door .If you encounter any installation problems or product quality problems, please contact us in time and We will help you solve the problem and make you satisfied..
Check Stock

Acuteye 33FT/10Meters Pneumatic Air Tubing, 10mm OD x 6.5mm ID PU Polyurethane Air Compressor Tube Hose Pipe For Air Compressor Fitting or Fluid Transfer (Black)

  • Pneumatic Tubing Pipe Size: 3/8" (Outer diameter) X 1/4" (Inner diameter). Product Total Length:33 Feet (10meters).
  • Pneumatic Tubing Material: PU ( Poly Urethane ),has high elasticity to restore memory effect. Flexible.
  • Burst Pressure: 2.5Mpa(363Psi).Tubing Pipe Working Temperature: -4℉-176℉（-20℃--80℃),） Stretch Resistance: 400kg/cm2.
  • Application: air, water, chemicals, lubricants, instrument lines, irrigation control systems, textile mills, food plants, vehicles and ships fuel delivery pipe, vacuum systems, air conditioning systems, cars, And hydraulic brake system, oscillation insulator and other industries. Pneumatic pneumatic tools.
  • Application Range: Pneumatic pneumatic tools.
Check Stock

Simlug Mini Air Pneumatic Cylinder, Cdj2B10-30B 10Mm Diameter 30Mm Stroke DoubleActing Stainless Steel Pneumatic Air Cylinder

  • The pneumatic actuator, The pneumatic cylinder is a mechanical devices which use the power of compressed gas to produce a force in a reciprocating linear motion..
  • The pneumatic air cylinder, Made of high quality stainless steel, the pneumatic cylinder has long service life..
  • This is a double-acting cylinder which uses the force of air to move in both extend and retract strokes..
  • It has 10mm cylinder diameter and 30mm stroke, the pressure is 0.15Mpa~1Mpa..
  • Pneumatic cylinder is quieter, cleaner, and do not require large amounts of space for fluid storage..
Check Stock

Metabo HPT 18V MultiVolt™ Cordless Angled Finish Nailer Kit | Accepts Nails 1-1/4-Inch up to 2-1/2-Inch | 15 Gauge | Lifetime Tool Warranty | NT1865DMAS

  • CORDLESS NAILER: 15 Gauge Cordless Nailer.
  • INCLUDES: NT1865DMAS, (1) Compact 3.0Ah Lithium Ion Battery, Charger, Contractor Bag, Safety Glasses.
  • FASTENERS: 15 gauge angled finish nails from 1-1/4-in - 2-1/2-in.
  • POWER: 1,100 Nails per charge using Metabo HPT's compact 3.0 Ah Li-ion battery.
  • APPLICATIONS: Ideal for all construction framing applications but is particularly useful for punch-out work on a jobsite without the need for a tank or hose.
  • DEPTH ADJUSTMENT: Get a professional finish with varying materials with the tool-less depth of drive adjustment.
  • PNEUMATIC-LIKE FEEL: The unique air spring drive system delivers similar performance as a pneumatic nailer.
  • BRUSHLESS MOTOR TECHNOLOGY: Experience longer run time per charge, less maintenance and increased durability.
Check Stock

SRC40 Swing Clamp Cylinder 90 Degrees Large Rotary Actuator Pneumatic Clamping Cylinder (SRC40x90L)

  • Excellent Material: This pneumatic swing clamping cylinder is made of pure aluminum block through CNC machining center, non-die-casting aluminum, high density and high strength, support long time work..
  • Hard Oxidation Treatment: The mirror inner wall surface of this pneumatic swing clamping cylinder is hard anodized to prolong the service life of the cylinder..
  • Protective Layer: The hard protective layer of this pneumatic swing clamping cylinder is not easy to be worn, not easy to be corroded, and can be used in harsh working environments..
  • Features: This pneumatic swing clamping cylinder has high consistency of water inlet and outlet, quick joint installation, and is not easy to leak.
  • left-turn-L and right-turn-R are optional..
  • Use Pressure Range: The pressure range of this pneumatic swing clamping cylinder is 1-7kgf/cm(Kpa)..
Check Stock

Pneumatic clamp, G18 pneumatic sealing clamp Easy to use Wide application for machining

  • Wide Range of Uses: Widely used in home decoration, equipment installation, mechanical operation, welding, mold and other industries..
  • Iron Material: Pneumatic clamp is made of high quality iron material, sturdy, durable and, exquisite workmanship, beautiful appearance..
  • Improve Production Efficiency: Cylinder Pneumatic hold down clamp can shorten test time and improve production efficiency..
  • Realize Automatic Control: Cylinder pneumatic hold down clamp is easy to operate and easy to implement automatic control..
  • Ensure Machining Accuracy: Pneumatic clamp can reduce the labor of workers, help ensure workpiece machining accuracy..
Check Stock