ReviewsPneumatic System Fittings

HaSaoMoi Air Brake Line Fitting, DOT Brass Push in Fitting, Push to Connect Union Fittings Air Brake Union 1/4" Tube OD for Trucks Trailers andIndustrial Use (4 Pack)

【PREMIUM MATERIAL】：Our push in fittings are made of high quality CA360 brass,Certified by DOT and Air Brake system Requirements,with corrosion resistance, high temperature ductility and low permeability. Great for long time use, dot air brake fitting pneumatic fittings type: 1/4".
【TYPICAL APPLICATION】：The air brake fittings assortment kit can be used with air systems, copper tubing in air lines brake systems, which is perfect for automotive car or truck repair,air operated seats, operating gauges, air horns, heater controls, industrial workshops, daily garden or lawn mower repair, towing machine hose connection and air brake connections ..
【EASY TO BE INSTALLED】: Union connect two tube with same OD. All quick connect fittings can be sealed by pushing the tube firmly into the fittings and they are also simple to be removed from the tube..
【MAX PRESSURE】: Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer’s recommendations for pressure and temperature mutations).

Check Stock

Utah Pneumatic Dot Air Fittings Tee Union 1/4”Od 1/4” Npt Air Push Fittings Male Female brake tube fittings Push In Fitting D.O.T Approved For Sae Brake Line fittings Applications Pack Of 2

Typical application: Air brake systems push dot fittings pneumatic fittings brass air brake fittings dot air line fittings.
Maximum operating pressure of 150 psi dot air brake fittings air line fittings 1/4 dot push union dot compliant air line fittings.
Temperature Range:_65°F to +250°F-40°C to +93°C push-to-connect fittings ptc air fittings push lock fittings.
Material:CA360 ,CA377 brass push air fittings tee brass fitting airline tee fitting air fittings 1/4 dot.

Check Stock

YaeTek Pneumatic 4.2CFM Air Operated Vacuum Pump A/C Air Conditioning System Tool Auto

Easy to Operate - Just connect a continuous air supply (80psi) to the "Air Input" fitting (standard 1/4" NPT) at the back of the pump, connect the Air Line and it will Pull Full Vacuum in Less Than 2 Minutes.
Applicaton - Great for Automotive Air Conditioning System, Home Air Conditioner, Refrigerators, Freezers etc..
Function -This AC Pump can Eliminate Moisture from Automotive/Home/Freezers etc Air Conditioning System, Makes It Safe and Easy To add Refrigerant.
This Pump can be used for R134a and R12 Automotive air conditioning.
Pneumatic 4.2CFM air operated vacuum pump with Fittings included.

Check Stock

Coolant Vacuum Refill Tool Kit Engine Cooling System Vacuum Purge & Refill Kit New Coolant Bleeder Kit with 4 Rubber Sleeves & 1 Universal Adapter Cone Plug (with Carrying Case) (4 Connectors)

VACUUM TYPE COOLANT FILLING FUNCTION: Pneumatic vacuum coolant filler first sucks and forms a vacuum on the cooling system by using shop air, then draws coolant into the cooling system.(Need vacuum pump and not included in the kit) Add coolant in vacuum, there is no large air pocket and avoid warping or other damage in engine. Normally, it takes 5-10mins to refill the coolant, the exact time depends on the size of the tank. Easy to operate and save time.
WIDELY USAGE RADIATOR PURGE AND ANTIFREEZE REFILL TOOL: JIFETOR antifreeze filler kit includes a universal tapered rubber adapter, with MIN. diameter 1.5CM and MAX. diameter 5CM, fits for almost all types of vehicles. The adapter can replace the radiator cap to seal the cooling system, and connect with the quick coupler on coolant refiller to help to fill antifreeze..
WATER TANK COOLANT VACUUM REFILL: Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosion and durable. The index range of gauge is -30~0inHg (-76~0cmHg), and normally -25~-20inHg is right time to add coolant. 18" rubber resin material weave reinforced hose, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Also there is a 21" metal chain hoo....

Check Stock

mxuteuk 5pcs Push to Connect Tube Fittings Copper Pneumatic fittings Male Straight push in air hose fittings 3/8 Tube OD x 3/8 NPT Thread

【Type】Quality Pneumatic Male Straight.
【Material】mxuteuk Pneumatic fittings are Made of Quality plastic and stainless steel for durable use.
Thread Coated with PTFE, offering good seal property，the joint can 360 degree rotation, Simple and dexterous；.
【Working Temperature】0-60°C | 32～140°F. Applicable Tube:PU / PA / PE / PVC.
【Package Content】5pcs x Straight Push-in Connect Fittings.

Check Stock

JIFETOR Cooling System Vacuum Purge Radiator Coolant Refill Tool Kit, Universal Automotive Water Tank Pneumatic Vacuum Antifreeze Change Filler Set, with Adapter Case Hose for Car Van SUV Truck

MULTIFUNCTION: The set is a all in one comprehensive radiator tool kit, includes leak detection, temperature measurement and coolant filling functions. The hand pump tester pressurize on the reservoir/cap, and watch for pointer drop over time to confirm system leak down. Pneumatic vacuum filler first sucks and forms a vacuum on the cooling system by using shop air, then draws coolant into system. Add coolant in vacuum, there is no large air pocket and avoid warping or other damage in engine..
WIDE USAGE: Coolant system leak checker and filling tool set is equipped with 17 specific adapters and 1 universal tapered rubber adapter, suitable for almost all types of radiator openings on classic and modern vehicles. Included 3 radiator cap test adapters and 2 connectors help to diagnose the leakage of radiator caps on most cars. All these adapters are color coded and placed exclusively, can be easily selected according to the marked pictures in instruction, convenient and no confusion..
WATER TANK COOLANT VACUUM REFILLER: Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosion and durable. The index range of gauge is -30 to 0inHg (-76 to 0cmHg), and normally -25 to -20inHg is right time to add coolant. 18" rubber resin mater....

Check Stock

Wolo (858) Tornado Heavy-Duty Compressor with 2.5 Gallon Capacity Tank

Ideal for applications that require large volumes of high-pressure air.
Ideal for powering train air horns, air-locking differential, or to power light-duty pneumatic tools.
Use the coiled filler hose with brass fittings, to fill shocks, rafts and sporting equipment.
The heavy-duty compressor is equipped with extended length stainless steel high-pressure hose, allowing the compressor to be separated from the tank for surface mounting.
Complete on-board air system that includes everything necessary for a professional installation.

Check Stock

30Pieces Pneumatic Elbow Straight Combination 1/4 Inch Tube OD x 1/8 Inch NPT Push to Connect Tube Fittings Male Thread Straight Push Quick Release Connectors Air Tool Connectors Connect Fittings

You will get: 15 pieces of 1/4 inch OD x 1/8 inch NPT pushed to connect air fittings, 15 pieces of straight tube connectors, there are a total of 30 pieces, different styles for you to choose, sufficient quantity can meet your daily needs.
Quality material: straight pneumatic fitting is made of quality plastic and copper, nice accessory, strong valve body, safe connection, not easy to leak, nice sealing performance, wear resistance, light weight, pressure resistance, you can use it for a long time.
Easy to use: quick tube connect fittings are easy to install and remove, one end is rod connection, the other end is external thread, quality cap can withstand increasing pressure without tripping, you can use them easily and save your time.
Wide range of application: you can use pneumatic hose fittings in various occasions, which are suitable for all kinds of PU/ PA/ PE/ PVC items, you can also use them in air, vacuum, convenient for you to use in daily life.
Warm tips: when you use the plastic push to connect fittings, you need to control the temperature properly, and work pressure should at 0-159 psi.
You can use them in different products and places.

Check Stock

60 Pieces Push Air Fittings Include 1/4 Inch OD Push to Connect Fittings Pneumatic Fittings Kit with 1 Black 1/4 Inch OD Nylon Air Tubing, 15 Spliters 15 Elbows 15 Tee 15 Straight

Package includes: you will receive 15 straight PU 1/4 inch pneumatic connectors and 15 elbow PV 1/4 inch pneumatic connectors and 15 PY 1/4 inch pneumatic connectors and 15 T-type PE 1/4 inch pneumatic connectors (black blue) and 1 roll of 1/4 inch OD black pneumatic nylon tube 33 ft (approx. 10 m), a nice combination for easy use and replacement of your daily life.
Size details: the tube outer diameter is about 1/4 inch, 4 types of pneumatic connections and a roll of 10 m (33 ft) 1/4 inch OD black pneumatic nylon tubing, the right size for your pneumatic piping needs.
Practical design: the air line fittings release ring of the 1/4 inch pneumatic air line fits the ellipse design to ensure that the disconnect device is in a nice shape, which can provide sealing performance, maximum pressure is 0~145 Psi, operating temperature is 32~140 degree Celsius.
Easy to install: the 1/4 inch pneumatic connector is easy to install and remove on 1/4 OD pipe, even easy to change the direction of the pipe connector after installation, suitable for PU/ PA/ PE/ PVC pipe.
Reliable material: these pneumatic connectors are made of quality plastic and stainless steel, corrosion resistance and ductility, which can serve you for a long time, and bring you a nice use experience.

Check Stock

Water Oil Separator Filter Airbrush Filter Moisture Separator for Air Line Compressor Fitting, 1/4 Inch NPT Inlet and Outlet (3)

...oncave) is the "outward" side of the airflow, and the connector side (convex) is the inlet for the airflow, they are easy to install and ergonomically designed for your convenience and ease of use.
General import export :standard universal male and female 1/4 inch NPT inlet and outlet designs make it easy to connect pneumatic lines to pneumatic tools and airbrush to accommodate most pneumatic tools for convenience.
Sturdy material: the water oil separator is made of polycarbonate housing, aluminum valve body and solid brass fittings, it has good anti-oxidation performance, which greatly improves the durability and reliability of the tool and prolongs its service life.
Extend tool life: clean air is essential in pneumatics, this filter can not only be applied as a water separator for air compressors, but also effectively trap oil and dust, so only clean air can to pneumatic tools.
Greatly reduce the disposal of worn airbrush and other pneumatic tools, effectively extending the life of pneumatic tools.
Suitable applications: the water and oil separator can be directly connected to paint airbrush, air compressors and other pneumatic tools.
It can be applied with airbrush, pneumatic tools and hoses, capable of capturing water vapor and oil particles entering....

Check Stock

3/8 Air Fittings Push to Connect Fittings,CEKER 3/8 Inch Tubing Od x 3/8\ NPT Thread Male Pneumatic Fittings Air Line Fittings Quick Connect Push in Connectors 5Packs

Type:3/8" Od x 3/8" NPT Male Push to Connect Fittings.
3/8 inch Tube Air Fittings Fluid Admitted: Air, Water (No Freezing).
3/8 Quick Connect Fittings Working Pressure:0-1.0mpa | 0-150psi.
3/8" od tube Pneumatic Fittings Applicable: Pipe PU/ PA/ PE/ PVC.
Working Temperature: 0-60°C | 32～140°F.
Push to connect air fittings 3/8 is made of Nickel Plated Brass and quality plastic- corrosion resistance, ductility.

Check Stock