ReviewsPneumatic Waste Oil Extractor

DEWILL Broken Bolt Remover, Stud Extractor Tool to Locks and Removes 1/4-Inch to 1/2-Inch Rounded Studs, Hexagonal Flat - Suitable for Rust, Painted, Damaged Waste Bolts

  • TOOL INTRODUCTION - Damaged bolt extractor 3/8" inch drive. It is suitable for most drive tools and can be used with manual or pneumatic impact wrenches and ratchets as well as adjustable wrenches and flat wrenches. Heat treated alloy steel is very durable and chrome-plated, will not be damaged by high-strength work, and will add lubricant to the internal rotating threads to provide better protection against rust and wear..
  • OPERATIONAL GUIDANCE - Simple operation does not need to be considered. Place the stud extractor on the stud and turn the bottom hex flat nut counterclockwise to tighten the jaws. After the jaws hold the broken bolt or stud firmly, continue to rotate the stud counterclockwise until it is removed.Then release and separate them in a clockwise direction..
  • EFFICIENT & VERSATILE - This stud removal tool is easy to operate and can help you get more rest time, whether it is the exhaust manifold, fuel plug, broken bolts, or broken, painted, rusted fastening screws The posts are effectively removed, but the threaded surface may be slightly worn due to the strong clamping force..
Check Stock

VICRING Fluid Extractor 200CC Oil Extractor Pump Manual Suction Vacuum Made Plastic Automotive Fluid Syringe Pump Car Fuel Transfer 7oz Syringe Type Oil Pump

  • [HIGH QUALITY AND LEAK-FREE]VICRING Oil extractor pump is made of high quality plastic material, which is robust, strong and long-lasting. Fluid extractor exterior has a clear and distinct scale for easy checking of the liquid balance.Oil transfer pump has a capacity of 200cc..
  • [FREE ALL CONCERNS ABOUT CHANGING FUEL] VICRING Oil fluid extractor is designed with a double rubber ring, which is not easy to leak oil. Oil transfer pump is suitable for power steering, coolant, oil change, rear axle rear grease change, and even for transferring high viscosity fluids..
  • [NOT EASY TO FALL OFF]VICRING Fluid extractor interface is designed with a snap so that the extension rod will not fall off easily, and with two extension rods attached, the residual oil at the bottom can be simply pumped out. The back cover of the fluid extractor pump is removable so that the remaining oil inside can be cleaned after use..
  • [EASY TO USE EVEN FOR BEGINNERS] Use the simple syringe-type actions of liquid delivery Oil Extractor syringe bottles (gearbox, brakes, steering, differential extraction dispensers) to quickly and cleanly in and out (extraction or....
Check Stock

12v 80w Electric Oil Change Transfer Pump Extractor Kits for Boat/Car/Lawn Mower Marine/Jet Ski/Truck/RV/ATV Changing Diesel Fluid Scavenge Suction

  • 80w OIL CHANGE EXTRACTOR - The engine oil transfer pump is 80w. Extracting motor oil from vehicles quickly and cleanly. It can be used for changing oil 3L/min. Not compatible with water and petrol, gasoline, kerosene..
  • EASY ENGINE OIL CHANGE - The 12v oil extractor pump comes with 2 extractor tubes, easy for a top down oil change by single ON/OFF switch controll. Pumps oil out throw dip stick, no need to lay under the machines or vehicles. The oil will simply draw out the motor through the oil dipstick bore..
  • MULTIFUNCTIONAL OIL EXTRACTOR PUMP - The oil change pump kit fits for Car, Boat, Jet ski, Motorcycle, Scooter, Marine, Quad Bike, Truck, Forklift, Generator, Tractor, Riding Mower, Snowmower, etc, siphoning & transfering diesel, oil to other Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc..
  • PORTABLE OIL PUMP CHANGE EXTRACTOR - The oil transfer pump is mini but powerful. With 5ft Outlet tube & 4ft Inlet tube, the 8.2ft long battery clamps makes the extractor pump kit possible for being used at large range. The 2 hoops are used to tighten the tubes to avoid oil spilling..
  • FOR DIFFERENTIAL FLUID TRANSMISSION - This high efficient self-priming oil extractor pump is easy to pump various fluids and oils. Place the inlet/outlet ho....
Check Stock

ARES 70016 - Damaged Bolt and Stud Extractor Tool - Grips and Removes 1/4-Inch to 1/2-Inch Studs - Ideal for Broken, Rounded Off, Painted Over, and Rusted Tight Bolts

  • ABOUT THE TOOL: This damaged bolt and stud extractor tool is 3/8-inch drive and can be used with manual or pneumatic impact wrenches and ratchets. The hexagonal flat can also be used with flat wrenches, adjustable wrenches, sockets, and locking pliers. Manufactured with high-grade Heat-Treated Alloy Steel for maximum durability, this tool also features a chrome finish for additional rust protection..
  • MULTIPLE USES: This bolt extractor will save hours of frustration on broken exhaust manifolds, oil filler plugs, rounded starter bolts, low grade bolts left in saltwater, painted-over bolts, rusted tight bolts and more..
  • TRADITIONAL BOLT EXTRACTORS: Traditional bolt extractors force the user to guess which size the damaged stud is. They have a tendency to strip the screw even more and shave metal off without budging the screw, leaving you worse off than when you started. The design of this bolt extractor allows you to clamp down on the damaged stud, eliminating the guess work..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you ha....
Check Stock

12V Electric Transfer Pump 5L DC Transfer Pump, 12V 60W Oil Extractor Pump for Car Marine Boat Scavenge Exchange Transfer Pump Engine Oil Extractor

  • DC 12V 5L Transfer Pump – Fast & Convenient: This 12v oil change pump is made of premium materials and electric fluid transfer pump can be used for a long time. DC 12V 5L transfer pump maximum flow 5L/min. 12V Electric Oil Extractor Pump allows to be used in a variety of different environments to transport liquids, such as 12v oil extractor pump for boats. Electric oil change pump is easy to use.
  • Fuel Extractor Pump are Widely Use:This electric motor oil extractor pump is general industrial equipment, chemical equipment, shipping, vehicle cleaning, agricultural spraying, drinks, carpet and floor cleaning, air cleaning cooling, water purification and water treatment equipment, ZO pipeline pressure, coal and metallurgical industries.
  • DC 12V 5L Oil Transfer Pump – Powerful Motor: Oil extractor transfer pump is equipped with the strong motor and adopting a continuous working principle, good help when you pump.Oil & fuel transfer extractor pump maximum voltage reach 12V and the maximum pressure 0.8mpa, the flew rate up to 5L/min. Electric oil extractor pump ideal for filling diesel powered vehicles or engines at your garage or repair shop. It can quickly and conveniently help you solve the problem of pumping liquid.
Check Stock

ATPEAM Oil Changer Vacuum Fluid Extractor | Manual Engine Oil Extractor Oil Changer Vacuum Fluid Extractor Pump Tank Remover 7L

  • 7L Oil Extractor: The manual oil extractor is made of high-quality polypropylene for durability and resistance to corrosion and rust. Its capacity can....
  • Four Fluid Extractor Hoses: The manual fluid extractor comes with four suction hoses to change different sizes for various conditions. Along with the....
  • Fluid temperature range: 35°F- 200°F/1°- 95°C.
  • Easy To Use: You can change engine oil and transmission fluid by merely opening the hood, inserting an appropriate hose to the bottom of the oil pan.....
  • Wide Application: The fluid extractor is widely used to extract the engine oil, brake fluid, ATF fluid, and other non-corrosive and non-thick fluid of....
Check Stock

ATPEAM Oil Changer Vacuum Fluid Extractor | Manual Engine Oil Extractor Oil Changer Vacuum Fluid Extractor Pump Tank Remover 9L

  • 9L Oil Extractor: The manual oil extractor is made of high-quality polypropylene for durability and resistance to corrosion and rust. Its capacity can....
  • Four Fluid Extractor Hoses: The manual fluid extractor comes with four suction hoses to change different sizes for various conditions. Along with the....
  • Fluid temperature range: 35°F- 200°F/1°- 95°C.
  • Easy To Use: You can change engine oil and transmission fluid by merely opening the hood, inserting an appropriate hose to the bottom of the oil pan.....
  • Wide Application: The fluid extractor is widely used to extract the engine oil, brake fluid, ATF fluid, and other non-corrosive and non-thick fluid of....
Check Stock

Fluid Extractor 200CC Oil Pump Automotive Fluid Syringe Pump Manual Suction Vacuum Fuel Car Transfer Oil Extractor 7Oz

  • [LONG SERVICE LIFE] VICRING Oil Extractor syringe is made of high-quality plastic materials, with 200cc capacity, strong and durable, high strength, and long service life..
  • [EASY TO USE EVEN FOR BEGINNERS] Use the simple syringe-type actions of liquid delivery Oil Extractor syringe bottles (gearbox, brakes, steering, differential extraction dispensers) to quickly and cleanly in and out (extraction or dispensing) the liquid extractor..
  • [USE WITH VARIETY FLUIDS] VICRING oil fluid extractor is suitable for power steering, coolant, oil changes, rear axle rear grease changes, and even for transferring high-viscosity fluid. Also for use with durable, oil and chemical-resistant oils, coolants, and hydraulic systems..
  • [WIDE APPLICATION] Great for extracting or changing engine oils or lubricants in boats, farm equipment, industrial gear boxes, motor bikes, motor vehicles, and ideal for use on vehicles and machinery brake master cylinders, oil filter housings, differentials and gearboxes..
  • [FUNCTION] VICRING Oil Extractor is designed to drain or top up the master cylinder and other fluid reservoirs, draw brake fluid from the fluid reservoir, and add new brake fluid before flushing the fluid at the caliper..
Check Stock

Oil Transfer Pump Extractor, Electric Oil Pump Fast Oil Change Transmission Fluid Extractor Pump, 12v 60w Diesel Fluid Scavenge Suction Pump for Changing Oil, Boat, Tubes, Truck, RV, ATV, Riding Mower

  • QUICKEST, CLEANEST OIL CHANGE EVER! - Oil Pump for Oil Change. Helps bleed diesel engines after filter change essential tool. Suck up to pump, good to go! Just get the motor warm. Turn it off and turn on the oil pump extractor. Its that easy. It drains to the last drop. Makes your oil changes that much quicker and cleaner. Worked great to suck out old brake fluid, differential fluid, gear oil, transmitting fluid..
  • POWERFUL SUCTION OIL FUNCTION- This high efficient battery powered oil extractor pump is easy to pump various fluids and oils. Easy to put together, all the hoses came with it. You just need to place the inlet/outlet hoses at the appropriate positions, connect the power clamps to the car battery, ran the small hose down the dipstick tube and turned it on, and press the button. Simple On/Off Power Switch, easy to use. Great for a quick oil change..
  • DIFFICULT OIL EXTRACTION NO MORE - The 12v Oil Change pump extractor are very easy to use and makes a top down oil change so easy. Ideal diesel fluid oil transfer pump extraction equipment for quick and clean oil-changes. The oil will simply draw out the motor through the oil dipstick bore..
Check Stock

Water Oil Separator Filter Airbrush Filter Moisture Separator for Air Line Compressor Fitting, 1/4 Inch NPT Inlet and Outlet (3)

  • ...oncave) is the "outward" side of the airflow, and the connector side (convex) is the inlet for the airflow, they are easy to install and ergonomically designed for your convenience and ease of use.
  • General import export :standard universal male and female 1/4 inch NPT inlet and outlet designs make it easy to connect pneumatic lines to pneumatic tools and airbrush to accommodate most pneumatic tools for convenience.
  • Sturdy material: the water oil separator is made of polycarbonate housing, aluminum valve body and solid brass fittings, it has good anti-oxidation performance, which greatly improves the durability and reliability of the tool and prolongs its service life.
  • Extend tool life: clean air is essential in pneumatics, this filter can not only be applied as a water separator for air compressors, but also effectively trap oil and dust, so only clean air can to pneumatic tools.
  • Greatly reduce the disposal of worn airbrush and other pneumatic tools, effectively extending the life of pneumatic tools.
  • Suitable applications: the water and oil separator can be directly connected to paint airbrush, air compressors and other pneumatic tools.
  • It can be applied with airbrush, pneumatic tools and hoses, capable of capturing water vapor and oil particles entering....
Check Stock

YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank

  • ...in plug on the transmission pan. All the 15PCS metal adapters are marked with NO. and well packed in a case, compatible with Ford, BMW, Nissan, Honda, Audi, VW DSG, VW CVT, Skoda, Porsche, Benz, Mini Cooper, Kia, Toyota, Hyundai, Infiniti, VOLVO and Lexus. You can find appropriate models by applicable manual.
  • YSTOOL pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Absorb, transport and distribute liquids under safe and clean conditions. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy. Pneumatic tool, works with vacuum pump to extract and with air pump to refill, ensuring high efficient and labor-saving.
  • Pump assembly incorporates the container cover, the handle trigger with lock, 2-way control valves for conversing evacuate and dispense, safety valve for automatically releasing excessed pressure (above 43psi /3bar), 1/4" American style air inlet plug, pressure gauge (0-80psi/0-6bar) for monitoring the pressure change, quick coupler for connecting main hose. 10L big capacity well constructed container, is marked with accurate scale to help observe the amount....
Check Stock