ReviewsPoe Ethernet Splitter

Cudy FS1006P 6-Port 10/100M PoE Switch 60W, 4 PoE Ports, CCTV Mode (Transmit Distance to 250m at 10Mbps), PD Detection,Fan-Less, Steel Case, Desktop and Wall-Mount, 802.3at / 802.3af

6 Ethernet ports, 4 port PoE+ with 60W total power budget, 2 port uplink ideal for connecting NVR and Internet. Compact Design with Internal Power Supply.
Power over Ethernet with 802.3at and 802.3af compliant. Power-Over-Ethernet (PoE) and PoE+ options available for powering IP Security Cameras, VoIP phones, wireless access points, and other PoE-powered devices..
CCTV function support remote power and data feeding up to 250m long distance, which is easy to expand network via ethernet cable to somewhere without power supply but need fix device such as IP Cameras..
With PD detect function, this PoE switch support auto detect power device, will not burned non-standard PoE device or normal PoE switch. Pin assignment: alternative 1/2 (+), 3/6 (-)..
High Quality chipset inside: Use high quality POE chip to ensure stable operation of the product.Plug & play: Mode A alternative 1/2 (+), 3/6 (-) power supply, simple set up with no software or configuration needed..

Check Stock

EnGenius Neutron IEEE 802.11n Wireless LAN Controller - 48 x Network (RJ-45) - PoE Ports - Rack-mountable

16 Gigabit and 8 2.5-Gigabit PoE Ethernet Ports.
802.3 at/af PoE+ Ready on All Ports with 410W PoE budget.
4 10-Gigabit Dual-Speed SFP+ (fiber) uplink ports.
Real-Time System Metrics, Deep-Dive Analytics and Remote Configurations.
Quick-Scan Device Register, Remote Monitoring and Troubleshooting.
Continuous PoE Power – Steady supply of PoE power for camera during switch upgrades.
802.3ad Link Aggregation (LACP) Supports Traffic Load Balancing.
Energy Efficient Ethernet (802.3az) improves energy savings when used with other compliant devices.

Check Stock

TRENDnet 8-Port GREENnet Gigabit PoE+ Switch, Supports PoE and PoE+ Devices, 61W PoE Budget, 16Gbps Switching Capacity, Data & Power Via Ethernet to PoE Access Points & IP Cameras, Black, TPE-TG82G

ETHERNET PORT CONFIGURATION: 8 Gigabit PoE+ ports with LED indicators provide a 16Gbps switching capacity to support edge network installations..
DESKTOP DESIGN: With a compact and lightweight metal housing design, this Ethernet switch is well-suited for desktop installations..
PoE+ POWER: A 61W PoE power budget supports up to eight Power over Ethernet devices. TPE-TG82g, delivers data and power over existing Ethernet cables to Power over Ethernet (PoE) devices such as Access Points and IP Cameras..
PLUG-AND-PLAY: Simply power up the switch and plug in connected devices. No software to install or configuration needed..
DATA TRANSFER RATE: Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit: 2000Mbps (full duplex).

Check Stock

PoE Injector Adapter PoE+ Injector 30W 10/100/1000Mbps IEEE 802.3af/at Compliant Up to 100 Meters 325 Feet

❤ Converts A Non-PoE Gigabit Port To A Poe+ Gigabit Port And Network A Poe Device Located Up To 100 Meters (328 Ft.).
❤ Auto-Sensing Technology Delivers Up To 30w To An 802.3at PoE+ Device With Backwards Compatibility For 802.3af PoE (15.4w) Device.
❤ 1 Gigabit Ethernet Port Input and 1 PoE+ Gigabit Ethernet Port Output..
❤ Plug & Play, No Configuration Is Needed, Simply Connect A Poe Network Device, Accommodates Most Installations Scenarios..
❤ Compact and Cost-effective Gigabit PoE/PoE+ injector, IEEE 802.3af/802.3at Compliant.Please Identify the Seller ThePoEstore, the Quality of Other....

Check Stock

GUSSLM Ethernet Splitter, RJ45 1 Male to 2 x Female LAN Ethernet Splitter Adapter Cable Suitable Super Cat5, Cat5e, Cat6, Cat7 LAN Ethernet Socket Connector Adapter

[Ethernet Splitter Multi-Function]: Easily convert your RJ45 connection in to two RJ45 sockets with this network splitter.Allow two computers to share high speed DSL, standard 8P8C design. It can compatible with Cat5, Cat5e, Cat6, Cat7..
[Signal is More Stable]: The network cable splitter adopts gold-plated pin core, metal shields the electromagnetic interference such as external EML, RFI, etc., transmission, and fixed RJ45 interface to ensure signal transmission..
[Ethernet Splitter Features]: The splitter Ethernet network adapter divides the original embedded Ethernet cable (8pins) into two groups (1236/4578) to transmit data through pure physical connection, without the function of assigning IP addresses. The speed of each cable set can only reach 100 megabytes, and the signal transmission does not interfere with each other..
[Ethernet Splitter connection]: If you have one network cable installed in your room, you have two computers (or other devices: Such as a TV) you use this rj45 1 to 2 ways RJ45 ethernet splitter help you do not have to pull back and forth cable..
NOTE: It is not a switch, it only allows two devices to use the network alternately, and does not support two devices using the network at the same time..

Check Stock

TRENDnet 5-Port Gigabit PoE+ Switch 31 W PoE Budget 10 Gbps Switching Capacity Data & Power Through Ethernet To PoE Access Points And IP Cameras Full & Half Duplex Black TPE-TG50g

ETHERNET PORT CONFIGURATION: 4 Gigabit PoE+ ports and 1 Gigabit port with LED indicators, provides a 10Gbps switching capacity to support edge network installations..
DESKTOP DESIGN: With a compact and lightweight metal housing design, this Ethernet switch is well-suited for desktop installations..
PoE+ POWER: A 31W PoE power budget supplies up to four Power over Ethernet devices. TPE-TG50g, delivers data and power over existing Ethernet cables to Power over Ethernet (PoE) devices such as access points and IP cameras..
PLUG-AND-PLAY: Simply power up the switch and plug in connected devices. No software to install or configuration needed..
DATA TRANSFER RATE: Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit: 2000Mbps (full duplex).

Check Stock

Duttek RJ45 Splitter Ethernet , RJ45 Ethernet Port Splitter, RJ45 1 Male to 2 Female Adapter for Ethernet Cat 5/CAT 6 LAN Ethernet Cable Extender Surf Online at The Same time 50cm/1.64 FT (1 Pair)

Splitter Ethernet network adapter divide original embedded Ethernet cables (8pins) into two groups (1236/4578). Two groups respectively transmit data with purely physical connection which don't have the function of the assign IP addresses..
RJ45 ethernet to 2 female allow increase the number of RJ45 network splitter on the basis of the one RJ45 outlet, ethernet port splitter cable support two devices connect network at the same time by using this new upgrade version, you can use your computer in two rooms..
Ethernet splitter 1 to 2 convert and increase your Ethernet connections from 1 male plug to 2 female sockets, Convert a single RJ45 outlet jack port to two RJ45 sockets easily,The speed of each cable groups (1 and 2) can only reach 100 megabytes.And the signal transmission of two cable groups are not interfered with each other..
Ethernet cable splitter use gold pated needle core, metal shield, fixed RJ45 interface, shielding the outside world EML, RFI Such as electromagnetic interference, transmission signal is more stable to ensure that the signal transmission..

Check Stock

LoveRPi Power-Over-Ethernet (PoE) HAT Kit for Raspberry Pi 3 Model B+ with Black Case

ULTIMATE POWER OVER ETHERNET HAT FOR RASPBERRY PI 3 B+: Deliver clean and reliable power to the latest Pi 3 Model B+ by removing the problematic MicroUSB plug altogether! Power-over-Ethernet is both simple, power efficient, and cost effective compared to having multiple power adapters..
BUILT FOR CLUSTER NODES: Simplify cable management and expand your on-premise cloud with POE! Power five, ten, twenty Raspberry Pi 3 Model B+ boards through a single POE switch. This PoE HAT was designed to exceed the power delivery standards set by the official Raspberry Pi PoE HAT and other products available on the market..
POWER OVER ETHERNET SWITCH REQUIRED: Network switch must be compliant with IEEE 802.3af PoE standard. PoE power output must be within the budget of the switch when powering multiple boards. PoE switch and Raspberry Pi 3 Model B+ sold separately..
ANODIZED HEATSINK AND VENTILATED CASE WITH COOLING FAN INCLUDED: Raspberry Pi 3 Model B+ gets very hot and active cooling is the only way to prevent temperatures from exceeding 150°F! This kit includes everything you need to keep your PoE powered board operating at maximum performance. Raspberry Pi 3 Model B+ sold separately!.
NOT COMPATIBLE WITH RASPBERRY PI 4 OR RASPBERRY PI 3 MODEL B AND OLDER MODE....

Check Stock

TRENDnet 8-Port Hardened Industrial Unmanaged Gigabit PoE+ DIN-Rail Switch, TI-PG80, 200W Full PoE+ Power Budget, 16 Gbps Switching Capacity, IP30 Rated Network Switch, Lifetime Protection, Black

ETHERNET PORT INTERFACE: 8 x Gigabit PoE+ Ethernet ports.
FULL POE+ POWER BUDGET & SWITCHING CAPACITY: The Gigabit PoE+ switch supplies up to 30 Watts of PoE / PoE+ power per port with a 200 Watt PoE power budget and allows for a 16 Gbps switching capacity..
DIN-RAIL & WALL MOUNT KIT: This 8-Port Gigabit PoE+ network switch comes with an integrated DIN-Rail mount and mounting hardware..
EXTREME TEMPERATURE SWITCH: The metal hardened IP30 rated Gigabit PoE+ Ethernet switch is equipped with a rugged IP30 rated enclosure and designed to withstand a high degree of vibration, shock, protection against ESD/EMI/surge, and operate with a wide temperature range (- 40 – 75 °C (- 40 - 167 °F)) for harsh environments..
REDUNDANT POWER: The 8 port switch has dual redundant power inputs with overload current protection (power supply sold separately: model: (TI-S24048).
TRENDnet LIFETIME PROTECTION: All metal TRENDnet switches come with lifetime manufacturer protection..

Check Stock

TRENDnet 8-Port Gigabit PoE+ Switch, 8 x Gigabit PoE+ Ports, 123W PoE Power Budget, 16 Gbps Switching Capacity, Desktop Switch, Ethernet Network Switch, Metal, Lifetime Protection, Black, TPE-TG80G

ETHERNET PORT INTERFACE: 8 x Gigabit PoE+ ports.
POE+ POWER BUDGET & SWITCH CAPACITY: 123 W PoE power budget supports up to eight power over Ethernet devices and the 8-port gigabit PoE+ network switch provides 16Gbps switching capacity to support edge network installations.
COMPACT FANLESS DESIGN: With a compact and lightweight rugged metal housing design, this desktop switch is well-suited for desktop installations. Its fanless design is ideal for quiet environments that require silent operation.
DATA TRANSFER RATE: Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex), Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex), Gigabit: 2000 Mbps (full duplex).
OPERATING TEMPERATURE: This 8-port gigabit PoE+ network switch is rated with an operating temperature range of 0 – 45 °C (32 - 113 °F).

Check Stock

D-Link DGS-3130-30TS DGS 3130-30TS - Switch - L3 Lite - Managed - 24 x 10/100/1000 + 2 x 10 Gigabit Ethernet + 4 x 10 Gigabit SFP+ - Desktop, Rack-mou

RJ45 Ethernet Splitter: It converts the single RJ45 socket into two. Use it when you often use your laptop in two different rooms without having to pull the network cable back and forth..
Compatibility: This RJ45 1 male to 2 female ethernet splitter compatible with router, computer, switch, TV, set-top box, monitoring equipment. Suitable for Cat5, Cat5e, Cat6..
More Stable: Ethernet cable splitter adopts gold-plated needle core to shield external electromagnetic interference. Fixed RJ45 interface, transmission signal more stable..
Features: The splitter ethernet network adapter divides the original embedded Ethernet cable (8pins) into two (1236/4578) to transmit data through pure physical connection, without the function of assigning IP addresses. The speed of each cable set can only reach 100 megabytes, and the signal transmission does not interfere with each other..
Attention: A single ethernet splitter does not support two devices to access the Internet at the same time. Only one device can be connected to the Internet at a time..

Check Stock