ReviewsPoe Pole Mount

Raspberry Pi 3 Model B+ Board (3B+)

1.4GHz 64-bit quad-core processor, dual-band 2.4GHz and 5GHz wireless LAN. Bluetooth 4.2/BLE, faster Ethernet, and PoE support (with separate PoE HAT)..
Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps), 4 × USB 2.0 ports and Extended 40-pin GPIO header..
1 × full size HDMI, MIPI DSI display port, MIPI CSI camera port, 4 pole stereo output and composite video port..
1GB LPDDR2 SDRAM；Micro SD format for loading operating system and data storage. (Micro SD is Not included.).

Check Stock

Buffalo Girls

Two installation methods: This wireless bridge bracket mount can be installed on a pole or wall-mounted, and you can choose to install it according to your needs, which is very convenient for you..
150 degree adjustment: The rod of wireless bridge bracket mount can be adjusted up and down by 150°. After you install the CPE, adjust the angle of the rod to receive signals of different strengths..
Firmness: This wireless bridge pole mount is designed with non-slip gears. After you adjust the angle of the rod, you only need to twist it lightly, and the rod will be firmly fixed. And this pole mount is equipped with two hoops to firmly fix your mount on the rod..
Waterproof: The surface of this pole mount is painted, and the top is equipped with a waterproof cap, which makes this bracket mount a good waterproof performance. It’s very suitable for outdoor use..
Wide application: This wireless bracket mount can be applied to all Ueevii wireless bridges. And for its length and firmness, the pole mount is also suitable for most of wireless bridges on the market, some AP can also use it..

Check Stock

Cudy GS1005P 5 Port Gigabit Ethernet Unmanaged PoE+ Switch, with 4 x PoE+ @ 60W, Desktop/Wall, Sturdy Metal Fanless Housing, 802.3af, 802.3at, Shielded Ports, Traffic Optimization, Plug and Play

5 Port PoE+ Switch: 5 Gigabit Ethernet ports, 4 PoE+ ports with 60W total power budget, Maximum 30 Watts Per Port.
Power-Over-Ethernet (PoE) and PoE+ options available for powering IP Security Cameras, VoIP phones, wireless access points, and other PoE-powered devices. Pin assignment: alternative 1/2 (+), 3/6 (-)..
The fanless design means zero added noise to this poe switch, making it ideal for noise-sensitive environments..
Plug and play, simple set up with no configuration needed. Made of high-quality metal case, sturdy and durable with long service life, provide better heat dissipation, suitable for most environment. Pin assignment, Mode A: 1/2(+),3/6(-).
Supports desktop or wall mount placement..

Check Stock

A ANNTLENT Pole Mount L-Type for Outdoor Antenna - Universal 12inch Length Outside Antenna Mounting Pole for Cell Phone Signal Booster Antenna-Pole Mount Bracket

【Longer length】This L-type antenna pole mount is 12 inches in length and 1.5 inches in diameter. Length of L-type Pole Mount is longer, which....
【Universal Use】The antenna pole mount is suit for outdoor use, suitable for various kinds of antennas and can be installed on building wall or....
【Weatherproof】The antenna pole mount is designed with high-quality stainless steel material, which is corrosion-resistant, rust-proof, not easy to....
【Easy Installation】This mount pole is designed to install an outdoor antennas for all cell phone signal boosters. Antenna pole mast contains....
【Manufacturer Warranty】Pole Mount enjoys 30-day money-back guarantee, 2-month free replacement, 1-year manufacturer warranty. Any problem during....

Check Stock

MikroTik CRS354-48G-4S+2Q+RM

The RB2011iL-IN is the most basic model, with five Gigabit ethernet ports, five Fast ethernet ports, power jack and PoE support..
It’s powered by the new Atheros next generation 600MHz 74K MIPS network processor and has 64MB of RAM and a Level4 RouterOS license..
There is PoE output function for port #10 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA..
RouterBOARD 2011iL-IN comes with desktop enclosure and power supply..
Wall mount kit for network closet is available for purchase as an optional accessory..

Check Stock

Ueevii Universal Wireless Bridge Bracket Mount, Pole and Wall-Mounted Mount for Outdoor Point to Point AP Access Point Client Bridge CPE

Two installation methods: This wireless bridge bracket mount can be installed on a pole or wall-mounted, and you can choose to install it according to your needs, which is very convenient for you..
150 degree adjustment: The rod of wireless bridge bracket mount can be adjusted up and down by 150°. After you install the CPE, adjust the angle of the rod to receive signals of different strengths..
Firmness: This wireless bridge pole mount is designed with non-slip gears. After you adjust the angle of the rod, you only need to twist it lightly, and the rod will be firmly fixed. And this pole mount is equipped with two hoops to firmly fix your mount on the rod..
Waterproof: The surface of this pole mount is painted, and the top is equipped with a waterproof cap, which makes this bracket mount a good waterproof performance. It’s very suitable for outdoor use..
Wide application: This wireless bracket mount can be applied to all Ueevii wireless bridges. And for its length and firmness, the pole mount is also suitable for most of wireless bridges on the market, some AP can also use it..

Check Stock

GPIO Reference Board for The Raspberry Pi Model A+, B+, Zero, 2, 3, 3B+, 4 (2 Pack)

1.4GHz 64-bit quad-core processor, dual-band 2.4GHz and 5GHz wireless LAN. Bluetooth 4.2/BLE, faster Ethernet, and PoE support (with separate PoE HAT)..
Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps), 4 × USB 2.0 ports and Extended 40-pin GPIO header..
1 × full size HDMI, MIPI DSI display port, MIPI CSI camera port, 4 pole stereo output and composite video port..
1GB LPDDR2 SDRAM；Micro SD format for loading operating system and data storage. (Micro SD is Not included.).

Check Stock

Phonetone Antenna Pole Mount for Outdoor Home Antenna - 12' Length Universal Outside Antenna Mast for Cell Booster Antenna

【Lengthened Pole Mount】This roof antenna mount is 12 inches in length and 1.5 inches in diameter. Length is more longer which is more convenient to install the antenna..
【Widely Usage】The antenna pole mount is meant for outdoor use and can be applied to building wall, suitable for kinds of antennas..
【Sturdy Quality】The antenna mounting pole built with high-quality aluminum alloy material, corrosion-resistant, anti-rust, not easy to bend or break. Ideal for long term and outdoor antenna installation..
【Easy Installation】This mount pole is designed to install an outdoor antennas for cell phone signal boosters. Antenna mast pole comes with the very simple accessory, so you can install it by yourself without querying the user manual over and over again..
【WARRANTY】The Phonetone Pole Mount includes a 30-day money-back guarantee, 2-month free replacement, 1-year manufacturer warranty. Any problem during installation or use, please don't hesitate to contact us get a satisfactory solution..

Check Stock

Cudy 8 Port Gigabit PoE+ Switch 120W, PoE Switch, 60 watts port1, 8 PoE Ports, 802.3 at/af, POE, PoE+, VLAN, Extend to 250 Meters, Not Support 802.3bt, GS1008PT

8 Port Gigabit PoE Switch, 120 Watts total PoE Budget + 2 x PoE+ports ( 60 watts maximum) +6 x PoE+ Ports(802.3at, 30 watts maximum)..
IEEE 802.3 at/af Compliant. Port #1 and #2 support IEEE 802.3 at/af, which could offer up to 60 watts PoE power. Port #3 ~ Port #8 support IEEE 802.3 at/ af, which could offer up to 30 watts PoE power..
VLAN Port Isolation. When working on VLAN mode, Port #1 ~ Port #6 will isolated from each other, while port #7 and #8 can communicate with them all. It is easy to manage and maintain, which can meet a lot of networking environment, such as Business building, Community, Hotel, Office etc..
Extend Long Distance. When working on Extend mode, the data transmission distance of Port #3 ~ #6 can be extended up to 250 meters(10Mbps speed), which is easy to expand network via ethernet cable to somewhere without power supply but need fix device such as IP Cameras..
Plug and play, Wall mount support, internal power supply. Power input support wide voltage range from AC 100V to AC 240 V. While the power output range is 44V to 52V accroding to IEEE 802.3af/at/bt standard. #Important Note: This item only support IEEE802.3 at/af device, does not support any non-standard or passive POE device.#.

Check Stock

Ubiquiti UVC-G3-DOME Wide-Angle 1080p Network Camera with Infrared White

Built-in Microphone,Wall or Ceiling Mount.

Check Stock

The EZ-Bridge EZBR-0214HD+ HD 2.4GHz Outdoor Wireless Point to Point System

EZ-Bridge LT2+ HD Industrial Strength 100MB 2.4GHz Wireless Point to Point Secure Bridge Pair, Includes outdoor Shielded CAT5 Cables and Surge....
Plug and Play Simplicity, Just Point and Power Up via 12-24V Passive PoE (PoE Injectors included).
Layer 2 Transparency, Supports VOIP, VPN, Multiple MAC Addresses and DHCP Across the Wireless Link.
Conforms to Wireless Standards 802.11gn, Wall or Pole(1-2inches) Mounting Brackets Included.
Operation Mode – Bridge or Router: Point to Point Bridge, Access Point, Access Point WDS, Client, Client WDS.

Check Stock