ReviewsPoe Power Budget

ZyXEL VMG4825 B10A - WIRELESS AC/N VDSL2 COMBO WAN (VDSL+GBE WAN) MODEM GBE GATEWAY AC

PORT CONFIGURATION - Fast networking performance with 24 Gigabit Ethernet ports.
SMART POWER - "Consumption Mode" allocates power efficiently, allowing the PoE budget to power more devices. Smart PoE+ 802.3af/802.3at support with a max of 30W per port (130W total budget).
SMART MANAGED - Get up and running in minutes: Web-based setup wizard enables simple and fast configuration and management.
LAYER 2 FEATURES - VLAN, QoS, IGMP Snooping, Link Aggregation (LAG), IPv6 and DoS prevention enable better security and management.
ENTREPRISE GRADE WARRANTY - Limited Lifetime warranty and free firmware upgrade support.

Check Stock

Cudy GS1010P 10-Port Gigabit Ethernet Unmanaged PoE Switch, with 8 x PoE+ @ 120W, Desktop/Rackmount, CCTV/VLAN Mode, 802.3af/ 802.3at, Plug and Play

10 Gigabit Ethernet ports, 8 port PoE with 120W total power budget, 2 port gigabit uplink ideal for connecting NVR and Internet. Compact Design with Internal Power Supply.
PD Detect and Port Power Prioritization: With PD Detect Auto-sensing technology, this 8 port PoE switch delivers up to 32W to an 802.3at PoE+ device with backwards compatibility for 802.3af PoE (15.4W) devices.Port-Power-Prioritization technology guarantees continuous power supply of key nodes. Pin assignment: alternative 1/2 (+), 3/6 (-)..
CCTV mode support remote power and data feeding up to 250m long distance, which is easy to expand network via ethernet cable to somewhere without power supply but need fix device such as IP Cameras..
VLAN mode support isolate 8 PoE+ port from each other. It is easy for this 8 port PoE switch to manage and maintain which can meet a lot of networking environment, such as Business building, Community, Hotel, Office etc..
High Quality chipset inside: Use TPS POE chip high quality chip to ensure stable operation of the product.Plug & play: Mode A alternative 1/2 (+), 3/6 (-) power supply, simple set up with no software or configuration needed..

Check Stock

TRENDnet 9-Port Unmanaged Fast Ethernet Long Range PoE+ Switch 8 x Fast Ethernet PoE+ And 1 x Fast Ethernet Port Extend PoE+ Up To 250m 820 ft At 10Mbps 1.8Gbps 60W Power Budget Black TE-FP091

DEVICE INTERFACE: 8 x Fast Ethernet PoE+ ports.
PoE+ POWER: This network Ethernet switch provides a 60W PoE power budget and supports up to eight Power over Ethernet devices..
POE TECHNOLOGY: With PoE technology, users only need one set of cables to deliver both data and power simultaneously which reduces equipment cost by....
FAST ETHERNET: Nine Fast Ethernet (10/100Mbps) ports provide a 1.8 Gbps switching capacity to support edge network installations..
LONG RANGE POE+ SWITCH: Extend your PoE+ signal up to 250m (820 ft.) at 10Mbps for long distance PoE installations by enabling the DIP switch..

Check Stock

TRENDnet 12-Port Gigabit PoE+ Smart Surveillance Switch, TPE-3012LS, 8 x Gigabit PoE+ Ports, 2 x Gigabit Ports, 2 x SFP Slots, 110W PoE Budget, Managed Switch, Long Range PoE+ up to 200m (656 ft)

DEVICE INTERFACE: 8 x Gigabit PoE+ Ports.
4-Digit PoE LED display (total power budget, available power, consumption per port).
SMART SURVEILLANCE MANAGEMENT: These managed ONVIF switches are optimized for the surveillance industry.
surveillance mode provides a graphical dashboard interface with detailed information about the switch and each connected device..
LONG RANGE POE+: Long distance PoE+ networking up to 656 ft./200m away at speeds up to 10mbps.
INTEGRATION FLEXIBILITY: Managed switch features include access control lists, VLAN, IGMP snooping, QoS, RMON, SNMP, and syslog for monitoring and flexible network integration..
POE DEVICE ALIVE CHECK: Feature that attempts to recover an unresponsive PoE device connected to the switch. If a device(ex. PoE camera) is unresponsive, the switch auto-reboots the PoE port attempting to recover the device.
POE POWER: Each PoE+ managed ONVIF switch supplies up to 30W of power per port and data over a single Ethernet cable to PoE devices.
HARDWARE DESIGN: Provides gigabit PoE+ ports, SFP slots for fiber connectivity, and a 1U 19” rackmount design with brackets included.
SURVEILLANCE MODE: ONVIF switches are optimized for the surveillance industry, provin....

Check Stock

Linksys LGS108P: 8-Port Business Desktop Gigabit PoE+ Unmanaged Switch, Ethernet Plus, Local Wired Network Connection Speed up to 1,000 Mbps

8, 16, or 24 Gigabit Ethernet autosensing ports. No fans.
Quality of Service (QoS) traffic prioritization.
Power over Ethernet (PoE+) support. Please note: Product is an 8 port switch with 4 PoE+ ports (first 1–4 ports) and dedicated PoE power budget of 50 W.

Check Stock

EnGenius Neutron IEEE 802.11n Wireless LAN Controller - 48 x Network (RJ-45) - PoE Ports - Rack-mountable

16 Gigabit and 8 2.5-Gigabit PoE Ethernet Ports.
802.3 at/af PoE+ Ready on All Ports with 410W PoE budget.
4 10-Gigabit Dual-Speed SFP+ (fiber) uplink ports.
Real-Time System Metrics, Deep-Dive Analytics and Remote Configurations.
Quick-Scan Device Register, Remote Monitoring and Troubleshooting.
Continuous PoE Power – Steady supply of PoE power for camera during switch upgrades.
802.3ad Link Aggregation (LACP) Supports Traffic Load Balancing.
Energy Efficient Ethernet (802.3az) improves energy savings when used with other compliant devices.

Check Stock

Goalake 6 Port Gigabit Ethernet Unmanaged PoE+ Switch, 4 Gigabit PoE+ @52W Built-in Power, 1 Gigabit Uplink + 1 Gigabit SFP Slot, 802.3af/at, VLAN Mode, 4kV Lightning Protection, AI Detection

...ice,the switch can only transmit data and cannot power your device,so the connected device needs to be separately powered. Or you can use it with active poe splitter..
【4 gigabit poe switch@52W 】PoE switch with 4 1000M PoE port + 1 1000M Uplink port,1 x 1G SFP,4×PoE ports providing up to 30W per port, total PoE budget 52W.1 gigabit ethernet Uplink Port for connecting NVR and Internet , etc...
【4KV Lightning Protection】Goalake PoE switch have professional lightning protection design-up 4KV port and power supply thunder prevents, with two levels of protection design respectively, effectively restrain the power of lightning from cable, which equivalent to give the entire network monitoring system with a security fence..
【AI Watchdog function of poe port】When the data or electrical transmission between the poe port and the terminal device is abnormal, the corresponding poe port of the device will automatically detect the problem and restart the connection..
【AI PD Detection】The poe port will intelligently judge whether the device connected to the port needs power supply. If it is a non-poe device that does not need power supply, the switch will not supply power to these devices and will not damage the device..

Check Stock

PoE Texas 24 Multi Port IEEE 802.3at PoE+ Injector - Gigabit Data Active Power Over Ethernet for High Powered Devices 30W PoE Injector for WiFi Access Point & More with 2X 56V 120W Power Supplies

Power IP cameras, desktop phones, WiFi Access Points (WAPs) and more. This 802.3af/at compliant multi port PoE injector takes power from a DC source and adds it to a Cat5, Cat5e, or Cat6 ethernet cable to power your PoE Devices..
Instantly upgrade your network gigabit switch to IEEE 802.3at PoE+. No need to purchase a larger 24 port switch. You can rely on your smaller, more cost-effective PoE switch and simply add Power + Data using the 802.3at PoE injector..
Active PoE means the right power at the right time. An active PoE injector negotiates with the powered device to deliver the voltage needed, so there are no concerns about accidentally burning out lower powered or non-PoE devices..
Plug and play. Our 24 port PoE adapter / injector transmits 10/100/1000 gigabit data, delivering lightning fast wired speeds with no loss of signal quality, up to 328 feet. Input voltage range: 48-56 Volts DC. 30 Watt output per port. Kit includes two 120 watt power supplies for a total budget of 240 watts..
All of our PoE power injector products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance..

Check Stock

TRENDnet 5-Port Unmanaged Gigabit PoE+ Switch, 4 x Gigabit PoE+, 1 x Gigabit Port, 10Gbps Switching Capacity, 35W PoE Power Budget, Metal Network Ethernet Switch, Fanless, Black, TE-GP051

DEVICE INTERFACE: 4 x Gigabit PoE+ ports.
PoE+ POWER: This network Ethernet switch provides a 35W total PoE power budget and supports up to four Power over Ethernet devices..
POE TECHNOLOGY: With PoE technology, users only need one set of cables to deliver both data and power simultaneously which reduces equipment cost by delivering data and power over existing network cables..
GIGABIT: Five Gigabit Ethernet ports support a 10 Gbps switching capacity to support edge network installations..
FANLESS DESIGN: The PoE+ network switch is a fanless design is ideal for quiet environments that require silent operation..
WALL M1OUNTABLE: This 5 port switch is equipped with sturdy metal housing and a wall mountable design for greater installation flexibility..

Check Stock

PoE Texas - PoE Injector - 12 Port Gigabit Passive Midspan Injector with 48V 120 Watt UL Power Supply - Power Over Ethernet for 802.3af or at PoE+ Devices VoIP Phone WiFi Access Point IP Camera

Instantly upgrade your network to PoE+. Simplify installations with a multi-port midspan injector. This unmanaged midspan PoE injector features 12 PoE ports for simplified transmission of power + data..
10/100/1000 Gigabit Data capability with transparent VLAN passthrough. Power up to 12 IP cameras, desktop VoIP phones, or other low voltage devices. This passive PoE injector will always deliver the same voltage as its power supply..
With available power and data delivery options for Mode A or Mode B compatible with IEEE 802.3af or at devices. PoE Texas offers other bundles with assorted power supplies to match your different device requirements..
Includes 48 volt 120 watt UL approved power supply for a shared budget of 120 watts. A streamlined and cost-effective multi port solution with 12 x gigabit ports (Data In) and 12 x gigabit PoE ports (Data + PoE Out)..
All of our PoE products are backed by a 1-Year replacement warranty and a 30-Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance..

Check Stock

UCTRONICS PoE hat for Raspberry pi

For Pi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not included)..
Intelligent Temperature Control: the 25mm×25mm brushless cooling fan will turn automatically when the temperature of the processor is high..
Smaller Size: Save more space than the official HAT, can be held in the most case for Raspberry Pi.We recently released a new version of PoE HAT with fan, which can support 48V non-standard switches, please search B09MCGFX12.
NOTE: The network switch or power sourcing equipment (PSE) is needed to supply the PoE signal, and they must be compliant with the IEEE 802.3af or 802.3at PoE standard, particularly section 33.4.1 with regards to PSE electrical isolation of the leads. For the non-isolated switch, such as some Ubiquiti switches can not provide proper isolation, they can only work with CAT 5E and CAT 6E network cable..

Check Stock