ReviewsPoe Power Injector

PoE Texas GPOE-8A | 8 Port Gigabit Passive 802.3af PoE Injector Without Power Supply

Instantly upgrade your network to PoE using this unmanaged PoE midspan injector with 8 PoE ports.
10/100/1000 Gigabit Data capability with transparent VLAN passthrough.
Passive Mode A power and data delivery compatible with IEEE 802.3af devices like Cameras, IP phones, Wireless Access Points and More.
Power Supply NOT included - Use with a 48-56v DC power supply for IEEE 802.3af applications.
Backed by our 1 year manufacturer warranty - For expert technical support from Austin, TX please call 512 479 0317.

Check Stock

XM1000pro

【PoE & IP OVER COAX CONVERTER】LINOVISION’s POE IP Over Coax converter can be used to upgrade analog system to IP surveillance system while using existing coaxial cable. Compatible with RG59, RG6 cables. Supports POE standards 802.3af (PoE) and 802.3at (PoE+). EOC Receiver should be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices.
【LONG REACH POE TRANSMISSION】Up to 100Mbps in 300m (1000ft) RG59 cable transmission, max 1000m (3000ft) distance in 10Mbps, working with CCA/CCU RG59/RG6 cable. Support POE power transmission with load capacity 11W over 300m (1000ft) transmission, working with POE IP camera, VoIP phone, POE WiFi AP.
【INDUSTRIAL DESIGN WITH BUILT-IN HEAT SINK】Industrial design, with built-in heat sink, ensure super reliability and hassle free transmission. Indoor use ONLY. Plug-and-play, configuration free, makes installation simplest. Small design (3.1"x2.0"x0.9") and light weight.
【POINT TO POINT CONNECTION ONLY】Act as MoCA (Multimedia over Coax) in point-to-point connection, transmit video/audio/data/control signal over coaxial cable.
【WORRY FREE】1 year warranty, US local technical support + Global after-hour support..

Check Stock

LINOVISION Mini 2 Port POE Extender IEEE 802.3af/at POE Repeater Up to 1000ft Power Over Ethernet Over Cat5/6 Cable, POE Splitter to 2 POE Devices Like IP Cameras, IP Phone, Wireless AP

【2-PORT POE SPLITTER】This 2-port POE extender is designed to supply POE power to two POE devices through one Cat5E/6 cable, and no power adapter is required. It is powered by 48V or 53V PoE Switch/POE NVR/PoE Injector/Mid-span. With this POE splitter, users can easily add extra POE device or non-POE device to existing cable without running a new network cable..
【UP TO 1,000FT POE + DATA EXTENTION】Extra 330ft POE+Data transmission will be extended with one Linovision POE Extender. And it supports two levels cascade deployment, therefore total 1,000ft POE + Data transmission is provided. (The 2nd POE Extender’s POE Input should be connected to the 1st POE Extender’s Out port, not Camera port).
【COMPLIANT TO IEEE802.3AF/AT STANDARD】This POE Extender works with all standard IEEE802.3af/at POE Switches/POE injectors/POE NVRs. And the POE Outputs supply power to standard POE devices (don't support 24V POE Devices) , like POE IP camera/IP phone/IP speaker. Noted: The CAMERA Port supports max 8W power consumption and the OUT Port supports max 15W. The max bandwidth is 100Mbps. As the distance increases, the power and the bandwidth will decrease..
【EASY TO CONFIGURE IP CAMERA ON SITE】By interting this PoE-Extender02 to an existing PoE cable, ....

Check Stock

PoE Texas 12 Port Gigabit PoE Injector with 48 Volt 60 Watt Power Supply for 802.3af Devices

Instantly upgrade your network to PoE - Unmanaged PoE midspan injector with 12 PoE ports.
10/100/1000 Gigabit Data capability with transparent VLAN passthrough.
Power and data delivery options for Mode A or Mode B compatible with IEEE 802.3af devices.
Includes 48 volt 60 watt UL approved power supply for a shared budget of 60 watts.
Backed by 1 year warranty - For expert technical support from Austin Texas, please call 512 479 0317.

Check Stock

PoE Texas GPOE-6AB | 6-Port Gigabit Poe Injector for 802.3af or 24 Volt Passive Devices | Power Supplies Available Seperately

Instantly upgrade your network switch or router to PoE using this 6 Port PoE midspan injector.
Use to power IP Phones, Access Points, IP cameras that require 10/100 or Gigabit Data.
Passive “always on” power and data delivery options for Mode A or Mode B compatible with IEEE 802.3af or 24 volt passive PoE devices.
Power Supply NOT included - use with a UL certified 24v 48v or 56v power supply.
Backed by 1 year warranty - For expert technical support from Austin, TX please call 512 479 0317.

Check Stock

Mikrotik RouterBoard mAP RBmAP2nD micro Access Point wireless Dual-Chain

The mAP also known as RBmAP2nD is a micro wireless Dual-Chain 2.4GHz Access Point with full RouterOS capabilities.
It is very portable, since it accepts power from a wide variety of sources - USB, Passive PoE and power jack.
The mAP also works as a PoE injector - the second Ethernet port provides up to 500mA of power to another device, for example, you can connect a SXT CPE device to it.
650MHz CPU, 64MB RAM, 2xEthernet, PoE out, Antenna 1.2dBi built in, Dimensions 68x68x19mm, Ethernet 2x 10/100 Mbit/s Ethernet with Auto-MDI/X.
Included parts: 24V 0.8A power adapter, microUSB type B to USB type A adapter.

Check Stock

2-Pack 802.3af PoE Splitter iCreatin 48V to 12V Power Over Ethernet Adapter for 10/100Mbps IP Camera Wireless AP Router Voip Phone

Split POE ( 802.3af/at) Signal to 12V DC Power (15.4Watt) and 10/100Mbps Ethernet Data.
Input 44-57DCV standard 802.3af/at PoE Switch or PoE Injector.
Isolation Power Solution with Full Protection..
Data Rate: 10/100Mbps, DC Jack: 2.1x5.5mm.
Plug and Play: Compatible with IP camera,IP phone, Wireless AP and other 12V Non-POE devices.
Backed by iCreatin 30 Days Free-returned, 1 Year Free Warranty and Lifetime Technology Support..

Check Stock

UCTRONICS PoE HAT for Raspberry Pi 4 with Case, 802.3at Power Over Ethernet Expansion Board for Pi 4 B Board, with Cooling Fan

Perfect for Pi 4: This PoE HAT can be used with Raspberry Pi 3 model B+ and Raspberry Pi 4 model B (not included). Please contact us if you received wrong pieces, we will send you a new case kit ASAP..
Higher Output Power: DC 5V (3A Max) / 12V (2A Max) via on-board terminal block.
Over-temperature Protection: The 25mm×25mm brushless cooling fan will turn automatically when the temperature of the processor is high..
Well-ventilated Case: Cut-outs for every port of Pi 4 board and PoE hat, easy to access to all ports as well as supplying well-ventilated environment..
NOTE: PSE (Power Supply Equipment) is needed to supply PoE signal to the Raspberry Pi, such as a PoE switch or injector..

Check Stock

JideTech Outdoor PTZ POE Security Camera, HD 5MP Auto Tracking IP Camera with 5X Optical Zoom, IR Night Vision Motion/Human Detection Built in Mic&Speaker IP66 Waterproof

...ving you more colorful and vivid image, 2.7-13.5mm 5X optical zoom lens with H.265 video compression and advanced 3D dynamic noise reduction technology, meet the needs of home monitoring.
★【Built-in POE】- With this POE (Power over Ethernet) camera, you only needs a cat5/6 cable connect it to the POE switch/POE injector to make it work, which makes the installation more convenient. (Note: POE Switch/POE injector is not included in the package）.
★【Two-ways audio real time communication】Build-in microphone and speaker,G.711A codec standard Anti-noise technology make sure the voice more clearly. After setting the motion detection area, when motion is detected, the camera will have the alarm sound. You can set sirens / warnings / even custom sound warning intruders.
★【Compatible with third party software】Support RTSP, multi-language. Remote watching by PC(IE, firefox, Chrome browser) and smartphone (IOS, Android). Compatible with 3rd party software : iSpy, VLC Player, and Blue Iris to watch video. Compatible with Hikvision, XM, Amcrest NVR. Can't wokr with MAC.OS.
★【Best service】Will this Camera work with my NVR ? Some customers help us verify that the camera can work with HiVision, Amcrest, Lorex, GW NVRs. If you have NVR problem, p....

Check Stock

StarTech.com 1 Port 2.5Gbps PoE Network Card, PCIe Ethernet Card w/RJ45, 30W 802.3at PoE NIC for Desktops/Servers, Network PoE LAN Adapter w/Low-Profile Bracket, NBaseT, Windows/Linux (ST1000PEXPSE)

2.5G NETWORK CARD WITH POE: This PCI Express x1 Network Card enables 2.5Gbps network speeds and supplies (PSE) 30W PoE over a single CAT5e (or later) cable - Leverage existing copper cabling without the use of a Power over Ethernet (PoE) injector.
POE+ COMPLIANT: Card provides up to 30W PSE and 25.5W PD at 48V DC to a connected device - Supports IEEE 802.3af (PoE) and 802.3at (PoE+) to power remote devices such as access points, RFID readers, and IP cameras.
MULTI-GIGABIT CONNECTIVITY: The Network PoE Card features 2.5GBASE-T (802.3bz) and will auto negotiate to the connected device's highest possible speed - The PCIe Network Card supports Wake-on-LAN and RealWoW for remote wake up of the host computer.
TECH SPECS: 2.5Gbps/1Gbps/100Mbps/10Mbps - NBASE-T - 1x RJ45 Port - Realtek RTL8125B - IEEE 802.3af/at - 802.3az EEE - PCIe 2.1 x1 - SATA & SP4 Power Connectors - Link/PoE LED Indicators - 16K Jumbo Frame - VLAN - PXE Boot - Full and Low-Profile Brackets.
VERSATILE POE NETWORK CARD: The PCIe Ethernet Adapter supports Windows and Linux - Variable speed options and includes a low-profile bracket for Small Form Factor (SFF) systems ensures compatibility of the PoE NIC with current and legacy devices.

Check Stock

PoE Texas | 802.3at to 24-Volt Converter | Easily Mix and Match 802.3at and 24-Volt Devices

Compatible with any IEEE 802.3at PoE+ Switch or Injector.
Dual purpose operation supports either 24-volts DC output with max 25-watts power on the 2.1mm DC or 24-volts power + gigabit data output on the RJ45.
Use to mix and match 802.3at and 24-volt passive devices like Ubiquiti on one switch or injector.
"Splits" Power and Gigabit data when used with the 2.1mm DC output.
Backed by our 1 year manufacturer warranty - For expert technical support from Austin, TX please call 512 479 0317.

Check Stock