ReviewsPoe Switch 8 Port

iCreatin 2-Pack Wall PoE Injector Power Over Ethernet Adapter 802.3af 48V 24W 0.5A for Security IP Cameras IP Phones, 10/100Mbps

  • Raspberry Pi 3B+ can work with this poe injector after installed this PoE hat or micro USB PoE Splitter.
  • This injector lets you power 802.3af compatible devices, with no additional adapter needed. Just plug the network cable(not included) into your network switch and into the “Data In” port, then plug the cable to your device into the “PoE” port with your existing network cable.
  • This Adapter support 10/100/1000Mbps gigabit ethernet connection, RJ45 PoE port using 4,5,7,8 pin as power transfer, Please do not connect any device that does not support the “PoE” port, this will damage your device.
  • This is an 802.3af compatible device, but it does NOT include the 802.3af/802.3at compliant detection feature. It supplies power NO MATTER WHAT, so don’t plug the “PoE” side into anything that isn’t ready for it.
  • Compatible all 802.3af PoE power device as IP Phone, IP camera, Gateway , Switch, or More…...
Check Stock

Cudy 8 Port PoE+ Switch with 2 Gigabit Uplink Ports 120W , 8 10/100Mbps PoE+@120W, Extend/VLAN Mode, 802.3af/at Standard, Fanless, Watchdog, Plug and Play FS1010PG

  • 120 Watts Reliable IEEE 802.3af/802.3at PoE+ switch. 8 10/100Mbps POE Port and 2 Gigabit Uplink Port. Ideal for small installations of 8 PoE devices (IP Phone, Wired surveillance camera, Wireless Access Point)..
  • Auto-sensing technology delivers up to 30W to an 802.3at PoE+ device with backwards compatibility for 802.3af PoE (15.4W) devices.
  • Extend function support remote power and data feeding up to 250m long distance, which is easy to expand network via ethernet cable to somewhere without power supply but need fix device such as IP Cameras..
  • Watchdog function will detect the status of the powered device in real time, once an abnormality is detected, the switch will actively reset the problem port and restore power..
  • Plug&play, simple set up with no software or configuration needed. Port-Power-Prioritization technology guarantees continuous power supply of key nodes..
Check Stock

Huacomm 8 Port PoE Switch with Full PoE+ Ports Plug-and-Play Desktop for IP Camera Access Points IP Phone Metal Housing Ethernet Extended Unmanaged IEEE 802.3af/at 96W HC1709P

  • The new and powerful upgrade for HC1709P: Power consumption upgrade from 65W to 96W + Human oriented design of power usage + Build-in power supply..
  • 8 PoE+ Ports plus 1 Uplink Port 10/100Mbps PoE Switch, Supports PoE power up to 30W for each PoE port, 96W for all PoE ports, full IEEE802.3af/at....
  • Security&Reliable. Smart PoE Power Supply, automatically identification, never destroy the front equipment. One-by-one port start function, avoid....
  • This PoE switch is ideal for powering PoE devices such as IP cameras, WLAN access points, IP phones, offices, office access control systems, and other....
  • LIMITED LIFETIME WARRANTY and 24/7 Technical Support..
Check Stock

Cudy 8 Port Gigabit PoE+ Switch 120W, PoE Switch, 60 watts port1, 8 PoE Ports, 802.3 at/af, POE, PoE+, VLAN, Extend to 250 Meters, Not Support 802.3bt, GS1008PT

  • 8 Port Gigabit PoE Switch, 120 Watts total PoE Budget + 2 x PoE+ports ( 60 watts maximum) +6 x PoE+ Ports(802.3at, 30 watts maximum)..
  • IEEE 802.3 at/af Compliant. Port #1 and #2 support IEEE 802.3 at/af, which could offer up to 60 watts PoE power. Port #3 ~ Port #8 support IEEE 802.3 at/ af, which could offer up to 30 watts PoE power..
  • VLAN Port Isolation. When working on VLAN mode, Port #1 ~ Port #6 will isolated from each other, while port #7 and #8 can communicate with them all. It is easy to manage and maintain, which can meet a lot of networking environment, such as Business building, Community, Hotel, Office etc..
  • Extend Long Distance. When working on Extend mode, the data transmission distance of Port #3 ~ #6 can be extended up to 250 meters(10Mbps speed), which is easy to expand network via ethernet cable to somewhere without power supply but need fix device such as IP Cameras..
  • Plug and play, Wall mount support, internal power supply. Power input support wide voltage range from AC 100V to AC 240 V. While the power output range is 44V to 52V accroding to IEEE 802.3af/at/bt standard. #Important Note: This item only support IEEE802.3 at/af device, does not support any non-standard or passive POE device.#.
Check Stock

TRENDnet 8-Port Gigabit GREENnet PoE+ Switch, TPE-TG81g, 8 x Gigabit PoE+ Ports, Rack Mountable, Up to 30 W Per Port with 110 W Total Power Budget, Ethernet Network Switch, Metal, Lifetime Protection

  • ETHERNET PORT INTERFACE: 8 x Gigabit PoE+ ports, Internal Power Supply..
  • POE POWER & SWITCHING CAPACITY: The 8-Port Gigabit Switch has eight Gigabit PoE+ ports which supply up to 30W of power per port with a 110W PoE Budget and 16Gbps switching capacity. Reduces equipment cost by delivering data and power over existing network cables.
  • FANLESS DESIGN: The fanless design of the unmanaged switch lowers energy consumption and eliminates operating noise..
  • RACK MOUNTABLE: The network switch is rack mountable and comes with a rack mount kit for easy convenient installation..
  • TRENDnet LIFETIME PROTECTION: All metal TRENDnet switches come with lifetime manufacturer protection..
Check Stock

TRENDnet 24-Port Gigabit PoE+ Switch 24 x Gigabit PoE+ Ports 370W Power Budget 48Gbps Switch Capacity RackMount Kit Included Ethernet Network Switch Metal Lifetime Protection Black TPE-TG240G

  • ethernet port interface: 24 x gigabit poe+ ports..
  • poe power budget & switch capacity: the large 370 w poe power budget supports up to 30 watts of poe power per port and all gigabit ports produce a 48 gbps switching capacity and supports jumbo frames up to 10 kb.
  • poe camera flexibility: the 24-port gigabit poe+ network switch recognizes non-poe, poe (15.4 w), and poe+ (30 w) cameras (or other poe devices) and supplies the required amount of power automatically.
  • rack mountable: this network switch is equipped with a rack mountable rugged metal enclosure with an included rack mount kit with rack mount brackets included for installation..
  • operating temperature: this 4-port gigabit poe+ ethernet switch is rated with an operating temperature range of 0 – 40 °c (32 - 104 °f)..
Check Stock

YuanLey 6 Port PoE Switch with 4 Port PoE+, 2 Ethernet Uplink, 100Mbps, 78W 802.3af/at, Extend Function, Metal, Desktop, Unmanaged Plug and Play

  • 【Port and Rate】This poe ethernet switch Include 4x10/100Mbps POE ports and 2x10/100Mbps uplink. All 1-4 POE ports support IEEE802.3AF/AT POE standard. The double uplink port can connect to nvr, switch, router, etc, make the network more reliable and flexible..
  • 【78W High PoE Power】This poe injector built-in industrial power supply. The whole power is 78W, each port up to 30W and 15.4W in the same time.**Please note: not compatible 24V passive PoE**.
  • 【Plug and Play】This poe network unmanaged switch support automatically detect devices, just plug in the power cord and network cable, no configuration required, easy to use..
  • 【Extend Function】 When the extend mode is enabled, single POE port supports 250m transmission distances and 10Mbps speed, and all PoE ports support VLAN isolation, improve the network safety..
  • 【Wide Applications】PoE and non-POE devices can be connected to this poe hub, such as poe camera/wireless ap, switch, router, computer, etc. It runs without noise and can be installed in office, home, and commercial locations. If you have any questions, please contact our official support, we will provide the best after-sales service.
Check Stock

Loocam PoE Switch 4 Port, 5 Port Gigabit PoE Switch – 4 Port PoE+ @ 65W and 1 Uplink Port, Unmanaged Ethernet Network Switch PoE, Plug and Play

  • Full Gigabit 5 Port PoE Switch: Unmanned PoE switch with 4 10/100/1000 Mbps RJ45 PoE+ ports and 1 Gigabit Ethernet Uplink port, 4 PoE+ ports providing up to 30W per port, total PoE power budget 65W(Include 48V 1.35A external power supply).
  • Power Over Ethernet, Plug And Play: Compliant with IEEE 802.3af/at POE standard, this gigabit unmanaged poe switch 4 port can automatically detect and identify PD devices that comply with the standard and supply them with power through the network cable. Plug and play, easy setup with no software configuration required. It can meet the POE power supply requirements of security monitoring, teleconferencing systems, wireless coverage and other scenarios..
  • 300 Meters Extend Transmission: Automatically detect the transmission distance and adjust the transmission rate, extend up to 300m(980ft) data and power PoE transmission range (Speed will drop to 10 Mbps). For better result over long distances transmission, use cat5e cables or above..
  • PoE Auto Recovery: This 4 port gigabit poe switch equipped with professional poe chip, it can intelligently detect the data exchange between the poe port and the terminal device. When an abnormality is detected, it will automatically restart and return to normal without affecting other po....
Check Stock

MokerLink Gigabit POE Switch, 5 Port and 8 Port PoE Switch, IEEE802.3af/at, Unmanaged Plug and Play, Sturdy Metal Fanless

  • 5 Port Gigabit PoE Switch: 4 Gigabit POE ports, 1 Gigabit Uplink Ports, 1000Mbps, 78W.
  • 8 Port Gigabit PoE Switch: 8 Gigabit POE ports, 1000Mbps, everyport can be uplink,120W.
  • Plug & Play: Support Power Detection function, automatically detect devices, can be compatible with non-POE devices to provide data. Plug and Play, just plug in the power cord, connect the ethernet cable directly to the device, without configuration..
  • Fanless design, always working silently. With mounting ears and screws for wall mounting, suitable for multiple installation environments..
  • Widely Used: Durable Metal housing. LED indicator lights. Widely used in IP cameras, Wireless Access Point, Home and Office Networks, etc. 100% Satisfaction - 30-day Money-Back and Lifetime Tech Support..
Check Stock

TRENDnet 16-Port Gigabit PoE+ Switch, 16 x Gigabit PoE+ Ports, 246W PoE Power Budget, 32 Gbps Switching Capacity, Desktop Switch, Ethernet Network Switch, Metal, Lifetime Protection, Black, TPE-TG160g

  • ETHERNET PORT INTERFACE: 16 x Gigabit PoE+ ports..
  • POE POWER BUDGET & SWITCH CAPACITY: The large 246 W PoE power budget supports up to 30 Watts of PoE power per port and all Gigabit ports produce a 32 Gbps switching capacity and supports Jumbo Frames up to 10 K.
  • POE CAMERA FLEXIBILITY: The 16-Port Gigabit PoE+ Network Switch recognizes non-PoE, PoE (15. 4 W), and PoE+ (30 W) cameras (or other PoE devices) and supplies the required amount of power automatically.
  • RACK MOUNTABLE: This network switch is equipped with a rack mountable rugged metal enclosure with an included rack mount kit and rack mount brackets included for installation..
  • OPERATING TEMPERATURE: This 16 port gigabit PoE+ Ethernet switch is rated with an operating temperature range of 0 – 45 °C (32 - 113 °F)..
  • TRENDnet LIFETIME PROTECTION: All metal TRENDnet switches are backed by our lifetime TRENDnet Manufacturer Protection..
Check Stock

Engenius - Switch - 8 Ports - Managed - Desktop (EGS5212FP)

  • 8 Gigabit PoE+ Ports, IEEE802.3at/af support.
  • 2 Gigabit uplink Ports and 2 SFP Slots for additional connectivity.
  • Internal power supply with 130 w PoE budget.
  • IGMP and MLD snooping provides advanced multicast filtering.
  • 2 Gigabit uplink ports and 2 SFP slots for additional connectivity.
  • Internal Power Supply with 130 W PoE Budget.
  • A full-featured Layer 2 PoE+ Switch (Qu's, IGMP/MLD Snooping, STP/RSTP/MSTP, Link Aggregation Control Protocol (LACP), SNMP v1/v2c/v3, and more).
  • Easy to manage and configure via a Web-based Graphical User Interface (GUI).
  • Up to 24 Gbps non-blocking switching capacity.
Check Stock