ReviewsPolar Scope Mount

Athlon Optics Precision 34mm MSR Ring, Black (701007)

  • Double 1'' scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube. High profile, 0.98'' gap from base of mount to bottom of rings. ( Item height: 2.1'').
  • With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20mm rail easily..
Check Stock

Monstrum Dual Ring Scope Mount Compatible with Ruger 10/22 | 1 Inch Diameter

  • Dedicated dual ring scope mount compatible with the Ruger 10/22 platform.
  • Scope mount installs directly to the Ruger 10/22 receiver via the factory mounting holes and included set screws with no additional hardware required. The mount will not install on platforms other than the Ruger 10/22..
  • 1 inch in diameter for precision mounting of standard 1 inch tube rifle scopes.
  • Precision machined from 6061 grade aluminum, comparable in weight to most scope rings with the added rigidity of a unified one piece mount design.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Tutengelctri 1 Scope Mount 2Pcs High Profile Scope Rings for 11mm Dovetail Rails

  • ▄︻┻┳═一 Double scope ring mount for 11mm dovetail mounts, specialized scope mount for .22/Airgun. Not for AR rifle..
  • ▄︻┻┳═一 Scope Rings Type: High Profile (0.8inch),Fit for a .22 rifle or an air rifle using a 3/8" or 11mm dovetail mount.
  • ▄︻┻┳═一 【High Quality Aluminum, Solid & Durable】Precision machining of aircraft grade 6061 aluminum alloy & high strength steel in....
  • ▄︻┻┳═一 With two rail clamp screws and four scope clamp screws, Precision and Repeatable Alignment. Scope rings are for standard....
  • ▄︻┻┳═一 Lifetime Warranty: 100% Satisfaction Guarantee.
Check Stock

Monstrum Extended Series Offset Picatinny Scope Mount | 30 mm Diameter | 0 MOA | Black

  • Built specifically for long range scopes - 6-24x magnification scopes and above - with 3 inches of spacing between scope rings to accommodate scopes with longer dimensions and larger adjustment housing.
  • Lightweight one-piece scope mount for mounting standard 30 mm diameter tube rifle scopes - with weight comparable to a set of lightweight rings, while providing the added rigidity and convenience of a one piece mount.
  • Mounts to any flat top Picatinny rail equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil.
  • Available in three styles - a 0 MOA mount for zeroing your scope at short to mid range distances, a 20 MOA mount for zeroing your scope at longer distances, and a 30 MOA mount for serious long distance shooters..
  • Mount frame crafted from lightweight 6061 grade aluminum with hardened steel Torx mounting hardware to prevent stripping of the bolts.
Check Stock

Monstrum Extended Series Offset Picatinny Scope Mount | 30 mm Diameter | 20 MOA | Black

  • Built specifically for long range scopes – 6-24x magnification scopes and above – with 3 inches of spacing between scope rings to accommodate scopes with longer dimensions and larger adjustment housing.
  • Lightweight one-piece scope mount for mounting standard 30 mm diameter tube rifle scopes – with weight comparable to a set of lightweight rings, while providing the added rigidity and convenience of a one piece mount.
  • Mounts to any flat top Picatinny rail equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle – guaranteed to hold zero against the toughest of recoil.
  • Available in three styles – a 0 MOA mount for zeroing your scope at short to mid range distances, a 20 MOA mount for zeroing your scope at longer distances, and a 30 MOA mount for serious long distance shooters..
  • Mount frame crafted from lightweight 6061 grade aluminum with hardened steel Torx mounting hardware to prevent stripping of the bolts.
Check Stock

Monstrum Picatinny Rail Mount for Remington 700 Rifles | Short Action | 0 MOA

  • Picatinny rail mount built specifically for Short Action Remington 700 rifle platforms.
  • Compatible with Short Action Remington 700 models only including: 223 Remington | 243 Winchester | 308 Winchester | 6.5 Creedmoor | 7 mm Remington Mag | 7 mm-08 Remington | 257 Weatherby Mag | 270 WSM | 22-250 Remington |300 Remington Ultra Mag | 300 AAC Blackout | 220 Swift.
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Monstrum Picatinny Rail Mount for Savage Axis/Edge Rifles | 0 MOA | Old Version Pre 9/2021 Models

  • Please note that as of 9/2021, Savage Arms has altered the drill hole pattern on newly manufactured Savage Axis rifles. Check the serial number on....
  • Picatinny rail mount built specifically for Savage Axis/Axis II/Edge rifle platforms.
  • Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long....
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Scalarworks Lightweight Ultra High-Performance QD LEAP/Scope Mount, 30mm, 1.57' Height

  • COMPATIBILITY: Rifles with MIL-STD-1913 Picatinny Rail.
  • ULTRA HIGH-PERFORMANCE SCOPE MOUNT: Designed for shooters who want the lightest, most rigid, easiest to use, and least obtrusive quick-detach scope mount possible.
  • LEVEL HEADED: the Leap includes our proprietary leveling screw to help you conveniently square your scope with your mount.
  • LIGHT MADE RIGHT: engineered to be the lightest QD scope mount, without compromising an ounce of strength.
  • QUANTUM QUICK-DETACH MECHANISM: Quantum Quick-Detach mechanism is completely recoil proof, while requiring only enough torque to firmly clamp onto a Picatinny rail.
Check Stock

HIRAM Dual Ring Offset Cantilever Scope Mount with Quick Release and Integrated Recoil Dampeners for Picatinny Rail, 30mm

  • QUICK MOUNT: Hiram's lightweight 5.96-ounce scope mount comes with pre-set ring spacing and quick release screws to allow for fast and simple installation and swapping of your scopes.
  • DURABLE CONSTRUCTION: Our cantilever mounts are constructed from lightweight and sturdy aircraft-grade 6061-T6 aluminum alloy.
  • the torx screws are also heat-treated for added stability and strip prevention.
  • LONG RANGE: Hit your target from hundreds of yards away since our scope mount's tilt angle allows you to zero in your gun at a greater distance for precision long-range shooting.
  • CANTILEVER DESIGN: Our monolithic scope mount's cantilever design allows you to position your scope up to 2 inches forward for optimal eye relief and increased field-of-view.
  • SATISFACTION GUARANTEED: Our scope mount has been rigorously tested to improve effectiveness and provide the highest-quality firearm accessory on the market.
  • we back these rifle attachments with our usual strong warranty and friendly 24/7 customer service, ensuring that you'll enjoy their use for years to come.
Check Stock

Monstrum Picatinny Rail Mount for Savage Accu-Trigger Model Rifles | Savage 10/11/12/14/16/110 | Short Action | 0 MOA

  • Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'').
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment..
Check Stock

Modkin 11mm Dovetail Scope Mounts for 1'' Scope Tube High Profile for Airguns or Premium .22 Rifles (Set of 2)

  • Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'').
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment..
Check Stock