ReviewsPolyester Resin Used In

Ding All 3 Oz (84ml) Standard Epoxy Repair Kit for Epoxy and Polyester Surfboards Repairs

THE ORIGINAL EPOXY REPAIR KIT: The Ding All Standard Kit contains ultra clear, easy sand SS 2000 epoxy resin resin, which is the undisputed, highest-quality resin available to the industry. Ding All Epoxy resin is used for both sanding and laminating applications and can repair both epoxy and polyester surfboards, as well as many other composite materials in canoes, SUP's, automotive and hobby.
CURES WITH A CATALYST: Each size of our Ding All Epoxy Kit comes with liquid catalyst (Part B) to make it cure. Average cure time is: Gel -30 minutes, hard in 6 to 8 hours @ 77 degrees F.
SUPERIOR DING REPAIR PRODUCT: Ding All Epoxy Resin is ultra-clear, non-yellowing and UV stable with a super strong flex to weight ratio and is proudly MADE IN USA.
ALLOWS EASY SANDING: This resin is non tacky and dries smooth providing the user an easy surface to finish sanding. It does not need to be sanded in-between coats.
A COMPLETE KIT FOR REPAIRS: The Kit Includes 2 oz. (56 ml). Ultra-Clear Epoxy Resin Plus 1 oz. (28ml). Hardener, 15cm x 34cm Fiberglass Cloth patch, 2-Sided Sanding Pad (1 side Smooth ....

Check Stock

Ding All 3 Oz (84ml) Super Epoxy Repair Kit for Small to Medium Size Epoxy and Polyester Surfboards Repairs

THE ORIGINAL EPOXY REPAIR KIT: The Ding All Standard Kit contains ultra-clear, easy sand SS 2000 epoxy resin resin, which is the undisputed, highest-quality resin available to the industry. This kit is used when UV light is not present and fiberglass cloth is needed. The kit can repair both epoxy and polyester surfboards, as well as many other composite materials in canoes, SUP's, automotive and hobby.
CURES WITH A CATALYST: Our Ding All Super Epoxy Kit comes with liquid catalyst (Part B) to make it cure. Average cure time is: Gel -30 minutes, hard in 6 to 8 hours @ 77 degrees F.
SUPERIOR DING REPAIR PRODUCT: Ding All Epoxy Resin is ultra-clear, non-yellowing and UV stable with a super strong flex to weight ratio and is proudly MADE IN USA. This resin is non tacky and dries smooth providing the user an easy surface to finish sanding..
A COMPLETE KIT FOR REPAIRS: This MADE IN USA kit contains 2 oz. (56 ml) ultra-clear epoxy resin - plus 1 oz. (28ml) harderner,15cm x 68cm fiberglass cloth patch,2 x 2-sided sanding pads, 2 cups & 6 mixing sticks, 2 cover sheets, Q-Cell Filler and bonus 1oz. Sun Cure epoxy fiberfill resin t....

Check Stock

Ding All Super Stand Up Paddle Board (SUP) Epoxy Repair Kit with a Superior, Eco-Friendly and Non Yellowing Formula for Small to Medium Ding Repairs

...same high standard resin used to build all types of surf crafts. This epoxy resin is easy to use. It is mixed in a ratio of 2 parts resin and 1-part hardener.
POPULAR CHOICE FOR PADDLEBOARD REPAIR: Ding All Paddleboard Epoxy Kit is a popular choice for ding repairs on both Polyester and Epoxy SUPs because of its exceptionally high strength, low odor while curing and a working time of around 30 minutes.
CURING TIME: The epoxy resin has a 30 - minute working time and 6 to 8 hours full cure figured at 77 F. The curing speed may change based on colder or warmer temperatures. It is eco-friendly and UV Stable to help prevent yellowing.
ALL INCLUSIVE KIT: This MADE IN USA kit comes with 2oz. Epoxy Resin & 1oz. Epoxy Hardener (3oz. total), Fiberglass Cloth,2 Sanding Pads (2 grade), cup & Mixing Sticks,2 cover sheets, Q-Cell Filler, bonus Sun Cure Epoxy Mini and Easy Instructions.
BONUS SUN CURE RESIN: If smaller dings are being fixed, the kit comes complete with our world-famous Sun Cure Epoxy Fiberfill resin. Packed with fiberglass strands for strength, Sun Cure will get the job d....

Check Stock

Tuff-Bond Hanger Adhesive

✅ GRADE A-True Composites is a renowned name for its premium product used in the marine industry!.
✅ CURES FAST-Reach cured quickly-4 hours minimum to 24 hours maximum, based on temperature!!.
✅ DRIES TACK-FREE-This DCPD-type resin dries tack free without the need for wax!!.
✅ MULTIPLE APPLICATIONS: marine, aerospace, FRP parts, auto body, on wood, fiberglass, or metal!!.
✅ HIGH COMPATIBILITY - Compatible with all types of fiberglass and coring materials, this polyester laminating resin is perfect for low-cost repairs, new construction parts, and vertical surfaces..

Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 207SA Special Clear Epoxy Hardener (10.6 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

...cs and porous materials, and is easily modified for a wide range of working conditions and applications.
NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
STRONG PHYSICAL PROPERTIES: The 105/207 Epoxy Mixture has strong physical properties, so it can be used as a structural adhesive for gluing and laminating. It has excellent compatibility with paints and varnishes. An ultraviolet inhibitor in 207 Special Clear Hardener helps provide a beautiful, long-lasting finish when used with quality UV filtering varnish. The 105/207 Epoxy Mixture cures clear and colorless.
APPLICATIONS: Three coats or more can be applied in one day without additional surface preparation. Fewer coats are required to fill fiberglass weave and in most cases, the final coating can be sanded the following day. Builders also appreciate the excellent fiberglass wet-out characteristics achieved with 105 Resin/207 Special Clear Hardener Mixture, yet it wont drain from vertical surfaces like the very slow curing, low....

Check Stock

2 Pack Halloween Skull Human Skeleton Bone Rib Shape Silicone Molds with 10Pcs Key Rings,Polymer Clay Mold for DIY Craft Keychain Necklace Epoxy Pendant Jewellery Resin Crafting

High-Quality-Material: These resin casting molds are made of silicone by advanced techniques, flexible and durable, reusable and smooth..
Easy To Use: Mainly recommend to make a personal keychain. Also ideal pendant ornament for your handbags, backpacks, cell phones, car or other wonderful objects..
Stylish Design: These keychain molds can be used for DIY jewelry craft. Perfect for boyfriend, girlfriend, families, friends and used as Halloween gift..
Widely Use: Epoxy resin molds are compatible with most of resin and casting materials such as epoxy resin, cement clay, polyester resins, etc..
Package Include: 2 Pack Halloween skull human skeleton bone rib polymer clay molds and 10 x Key Rings..

Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 207SB Special Clear Epoxy Hardener (42.2 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

...cs and porous materials, and is easily modified for a wide range of working conditions and applications.
NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
STRONG PHYSICAL PROPERTIES: The 105/207 Epoxy Mixture has strong physical properties, so it can be used as a structural adhesive for gluing and laminating. It has excellent compatibility with paints and varnishes. An ultraviolet inhibitor in 207 Special Clear Hardener helps provide a beautiful, long-lasting finish when used with quality UV filtering varnish. The 105/207 Epoxy Mixture cures clear and colorless.
APPLICATIONS: Three coats or more can be applied in one day without additional surface preparation. Fewer coats are required to fill fiberglass weave and in most cases, the final coating can be sanded the following day. Builders also appreciate the excellent fiberglass wet-out characteristics achieved with 105 Resin/207 Special Clear Hardener Mixture, yet it wont drain from vertical surfaces like the very slow curing, low....

Check Stock

Mulukaya 8Pcs Growing Crystal Quartz Rock Epoxy Resin Silicone Molds Crystal Stone Gravel Casting Molds Jewelry Making Tools for Craft Keychain Necklace Earring Project

Material: Made of high quality silicone material. very flexible, easy to demold, reusable, easy to clean with soap and water..
How to DIY: These silicone resin molds are compatible with most resins or other casting materials. Such as epoxy resin, UV resin, polyester resins, polymer clay etc. You can add some resin pigment, and embed different kinds of embellishments withsome glitters, mica powder, liquid resin dye, dry flowers, beads or anything you like to create a unique style of art that belongs to you..
Wide Usages: These growing crystal quartz rock resin silicone molds can be used for making necklace, keychain, earring, decorative table ornaments, resin crystals, cystal soaps, candles etc..
Ideal Gift: Using these silicone resin molds to make personalized DIY art crafts with your family or friends for Thanksgiving, Christmas, birthday Gift Choice..
Please keep the silicone mold away from direct sunlight and dust, for better protection and longer service life..

Check Stock

2Pcs Silicone Hummingbird Resin Molds Hummingbird Epoxy Casting Molds with 12Pcs Key Rings for Keychain Jewelry Resin DIY Crafts Making Supplies

【Package Includes】You will receive 2 pieces Hummingbird style epoxy resin keychain molds, 12 pieces key rings, sufficient quantity will meet your different needs..
【Durable & Resuable】The hummingbird keychain mold is made of high quality silicone, soft, flexible, easy to demold, resistant to tearing, not easy to get deformed, washable, pretty durable and reusable..
【Easy to Use】Mainly recommend to make a personal keychain. Also ideal pendant ornament for your handbags, backpacks, cell phones, car or other wonderful objects. Additionally, it can be used as a household decoration..
【Widly Compatible】The silicone keychain mold is compatible with most of resin and casting materials such as epoxy resin, cement clay, polyester resins, gum paste, soap, wax, candle, etc..
【Ideal Gift】Stylish design. These resin casting molds can be used for DIY jewelry craft. Perfect gifts for boyfriend and girlfriend, Valentine's day gift, anniversary gift, Birthday gift or Christmas gift..

Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 205A Fast Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

...cs and porous materials, and is easily modified for a wide range of working conditions and applications.
NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
FIVE-PART RESIN TO ONE-PART HARDENER RATIO: Mix 205 Fast Epoxy Hardener with 105 Epoxy Resin in a five-part resin to one-part hardener ratio. The resulting cured epoxy is a rigid, high-strength, moisture-resistant solid. The combination of 105 Resin/205 Fast Hardener has excellent bonding and coating properties. The West System 205 Fast Hardener is formulated to cure well at temperatures as low as 40-degree-F.

Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 205B Fast Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

...cs and porous materials, and is easily modified for a wide range of working conditions and applications.
NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
FIVE-PART RESIN TO ONE-PART HARDENER RATIO: Mix 205 Fast Epoxy Hardener with 105 Epoxy Resin in a five-part resin to one-part hardener ratio. The resulting cured epoxy is a rigid, high-strength, moisture-resistant solid. The combination of 105 Resin/205 Fast Hardener has excellent bonding and coating properties. The West System 205 Fast Hardener is formulated to cure well at temperatures as low as 40-degree-F.

Check Stock