ReviewsPolyurethane Part

GSKMOTOR Polyurethane Motor Engine Mounts Bracket for Small & Big Block Chevy SBC BBC 350 -RED/Pair

  • Fit for Small & Big block Chevy motor mounts.
  • Great for stock and high performance engines.
  • 2-9/16" between mounting frame tower mounting tabs.
  • Wide Compatibility： FITMENT for Corvette.
  • for Chevy II ... many different makes and models.
  • Replaces O.E. part numbers: 3990914 3960768 6258154.
  • Made from Polyurethane with zinc plated steel construction, strong and sturdy.
  • Reinforcement plates includes for extra height and strength if needed.
  • Listing Includes - 1 PAIR Polyurethane Motor Engine Mounts Bracket.
  • Excellent quality, fast delivery, simple after-sales. We make every effort to provide customers with satisfactory service..
Check Stock

Hotsteelies Door Card Cup Holder Drink Holder New for VW MK3 Golf Jetta GTI GLI VR6 Cabrio

  • Professional installation is highly recommended.
  • Interchange Part Number: Polyurethane Front Lower Control Arm Bushing Upgrade Replacement.
  • Other Part Number: 357407182 MK2 MK3 MK4 LCA Bushings Handling Supports.
Check Stock

labwork Engine Swap Weld-in Motor Mounts 91018040 Replacement for Chevy Small & Big Block SBC BBC

  • Replacement for Chevy Small & Big Block SBC BBC, and 4.3L V6 engines.
  • Polyurethane bushings for a comfortable ride quality.
  • Weld-on frame stands, bolt-on engine mounts w/ hardware.
  • Includes all the parts in the pictures, please verify this is the right part number before ordering.
Check Stock

TotalBoat-520120 TotalTread Non-Skid Deck Paint, Marine-Grade Anti-Slip Traction Coating for Boats, Wood, Fiberglass, Aluminum, and Metals (Light Gray, Quart)

  • UNIQUE NON-SKID DECK PAINT: Durable, textured, low-glare high-traction surface for secure footing, with a comfortable rubberized texture that’s less abrasive than traditional silica additives: One part polyurethane non-skid deck paint creates a durable, high-traction surface for comfortable, secure footing and a finish that’s less abrasive than traditional silica additives.
  • LONG-LASTING POLYURETHANE FINISH: Durable coating won’t fade or peel.
  • easy to clean – scrubbing won’t wear away the finish.
  • affordable way to bring your old boat flooring back to life.
  • NON-SLIP PAINT WITH MANY APPLICATIONS: Boat decks, docks, cabin soles, hatches, stairs, steps, gunwales, swim platforms, concrete, patios, floors, and anywhere else you need sure footing.
  • 1-PART PAINT IS EASY TO APPLY by brush or roller on fiberglass, wood, properly primed aluminum, metals, and previously painted surfaces.
  • add a second coat for greater traction. Coverage: 250-300 sq. ft. per gallon.
  • COMES IN PAINT COLORS TO MATCH TOPSIDES OR EXISTING NON SKID PATTERNS: Sand Beige, Kingston Gray, Light Gray, White (tintable with TotalBoat Wet Edge Topside Paint). Available in Quarts and Gallons.
Check Stock

Sanita PU-Coated Leather Clogs for Women - Arch Support, Durable, Closed-Back, APMA-Approved Slip-On Shoes - Black, Womens 7.5-8

  • PROFESSIONAL CLOGS FOR WOMEN: The Professional PU style features a polyurethane-coated leather upper with a padded instep and a microfiber insole with an anatomically correct footbed. The polyurethane outsole features a rocker bottom. This style is approved by the APMA and part of our Professional Collection..
  • DURABLE, SHOCK ABSORBING OUTSOLE: Put some distance between your feet and those hard, concrete floors. Go from ouch! to ahh! with every step. Never feel cramped or squished. Lots of rooms for your toes here. Go ahead and wiggle them..
  • ARCH SUPPORT AND COMFORT: So comfy! A soft footbed adds cushioning, wicks sweat and provides arch-support that helps protect from foot and back fatigue. Give your feet a pep talk in the form of an anatomically correct footbed with arch support and say so long, foot fatigue!.
  • APMA APPROVED: Sanita Clogs are doctor approved! Our clogs have long carried the Seal of Acceptance from the APMA, meaning doctors recommended our clogs!.
  • EASY TO CLEAN: Polyurethane-coated clogs can easily be wiped down with soap and water or alcohol for a deeper clean..
Check Stock

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood White Gallon

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and....
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
Check Stock

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood White Quart

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and....
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
Check Stock

OneTigris Eyeglasses Hard Case Tactical Molle Zipper Sunglasses Carrying Case 1000D Nylon with Clip (Coyote Brown)

  • size:Outer dimensions/W2.63×D1.25×H6.1 Inner Dimensions/W2.44×D1.06×H5.9(inch)Weight: 1.79ounces .
  • Material: Faux Leather . Soft faux Leather design, fashion and durable (Polystyrene, polyurethane.
  • lining: polyester)Country of origin: China Planning: Japan.
  • Thin insertion type type semi-hard case excellent for carrying. A sense of luxury in the balance of base fabric and side color..
  • The outer part with the hook part protects the glasses from impact with a hard case, and the inner part fits gently with the body with a soft case..
  • Dimensions：about 6.1" long 2.6" wide & 1.2" thick. fits into a front pocket nicely （internal: 5.９ x 2.4 x 1.06 inch)..
Check Stock

QWORK 20Pcs Static Mixing Nozzle Tip, Mixing Epoxy Adhesive Applicator Nozzle,Mixer Plastic Resin Mixing Tip for AB Gun 50ml/1.7oz(1:1/1:2Ratio)

  • High Quality Material: Plastic, sprial interior dynamic mixing nozzle..
  • Mixers can be used with epoxy, polyurethane, silicone, and a variety of other adhesives and sealants. Applications include electronic component potting, automotive, communications, automotive, aerospace, biodiesel, wind and solar energy devices and many others..
  • Efficiently mixes a variety of 2 Part adhesives, sealers and foams..
  • High-Performance mixing nozzle for use with all standard 50ml B-System cartridges, Hinkle polyurethane, compatible with all major adhesive brands.
Check Stock

iPhone 12/12 Pro Star Wars Millennium Falcon Retro Stripe Case

  • Officially Licensed Star Wars Accessories.
  • Two-part protective case made from a premium scratch-resistant polycarbonate shell and shock absorbent TPU liner protects against drops.
Check Stock

Sherwin Williams Mirror Gloss Black Powder Coat Paint (1 LB)

  • Sherwin Williams Mirror Gloss Black Powder Coat (1 pound).
  • Cure Schedule: 15 minutes at 380 degrees (Part Metal Temperature).
  • $8 Flat Rate Shipping on Your Entire Order!.
  • THIS IS NOT A LIQUID PAINT, THIS IS A POWDER COATING POWDER.
Check Stock