ReviewsPolyurethane Parts

Backfire Premium Beginner Longboard Skateboard Cruiser

  • Deck : 41 x 9inch / 104*22.8cm, L*W The decks are constructed using three layers of semi carbonised bamboo, and two layers of glass fiber with a symmetrical U shape, tip’n’tail design..
  • Trucks: The 50 Degrees, 7” unique casting trucks with double hardness, high rebound, polyurethane bushings, which will simultaneously ensure stability & provide rapid rebound support..
  • Wheels: 85% rebound 65mm X 51mm 78A Polyurethane wheels with rock finish, ABEC-7 high speed bearings.We present super practical T-shaped tools without assembly.
  • Grip: The "discus fish" segmented grip tape. The tip’n’tail of the board adopts OS46 grip tape, boasting coarse sand grains, the middle of the board utilises the wear-resistant OS780 grip tape.
  • We believe our customers are our beacon, so we offer 180 days after-sales maintenance and local customer support for all skateboards (excluding wearing parts), we would love to hear from our customers, we will reply to all customer information within 24 hours..
Check Stock

SainSmart 3mm TPU 3D Printing Filament, 1.0 kg, Red

  • TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible..
  • Compatible with printers on the market that accept 3 mm filament. Including Lutzbot, Ultimaker 3D printers. With bowden extruder needs to print slowly, excellent adhesion on heat bed, not neccessary for extra adhesion like tape..
  • With proper settings, TPU is easy to print thanks to excellent bed adhesion and the filament's tendency to not warp..
  • Resist to oil, grease and etc. Duarable performance even in chemical harsh environment..
  • Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more!.
Check Stock

Canomo 24 Inch White Polyurethane Ceiling Medallion Chandelier Medallion 4-Piece Set for Quick and Easy Installation, 24"OD x 5"ID

  • Package includes 1 set 24 inches Ceiling Medallion, It consists of four identical parts.
  • Material: Dense Durable Polyurethane, Lightweight for quick and easy installation.
  • EASY TO INSTALL: with 4 parts, did not necessary to disassemble the installed chandelier, just glue parts to the ceiling..
  • Can be cut, drilled, glued or screwed with common tools. Factory primed and ready for paint or faux finish.
  • Add a high-end upgrade inexpensively, use to cover too-large holes and cracks around fixtures to a certain extent.
Check Stock

AquaLung Titan Regulator

  • First Stage: The balanced diaphragm mechanism allows for ease of breathing and consistent performance while protecting internal moving parts from the environment.
  • The T-Shape design is compact and provides optimal hose routing. The unique forged body uses less brass, making it more compact and lighter weight than other regulators.
  • The polyurethane outer skin protects metallic parts from shocks. The MP and HP outlets are perfectly positioned to for streamlined hose positioning.
  • Second Stage: The unique Comfobite mouthpiece, with the patented roof of mouth bridge, reduces jaw fatigue. The removable and reusable clip facilitates quick and easy mouthpiece changes.
  • With few components and easy access to the exhaust valve through a clipped deflector, maintenance is easy. The in-line Venturi knob offers effective and progressive adjustments using an ergonomic design for easy manipulation, even with gloves.
Check Stock

SainSmart TPU Filament 1.75mm, 0.25KG (Blue+Red)

  • What you get: SainSmart Flexible TPU Filament 0.25KG × 2: Blue+Red.
  • 0.25 kg (approximately 0.55 lbs) per spool.
  • Recommended extruder temperature: 200 - 220°C.
  • Recommended platform temperature: 40 - 65°C.
  • TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible.
  • Compatible with all FDM printers on the market which accept 1.75 mm filament.
  • Including Prusa i10, Monoprice MakerSelect, SainSmart xCreality, and other RepRap printers.
  • Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more.
Check Stock

SainSmart Green Flexible TPU 3D Printing Filament, 1.75 mm, 0.8 kg, Dimensional Accuracy +/- 0.05 mm

  • TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible..
  • Compatible with all FDM printers on the market that accept 1.75 mm filament. Including Prusa i3, Monoprice MakerSelect, SainSmart xCreality, WanHao & Qidi, and other RepRap printers..
  • With proper settings, TPU is easy to print thanks to excellent bed adhesion and the filament’s tendency to not warp..
  • Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more!.
Check Stock

P-REP Alien Brain Starter Complete Wooden Fingerboard -Throwback Edition - 30mm

  • PROlific "Double Vision" edition complete by Teak Tuning. Includes the PROlific exotic two-tone deck, white 32mm spacer trucks with upgraded o-ring....
  • Handmade deck made from five plies of cross-grain wood for maximum strength. Bottom ply features a Teak logo laser engraving. Upgraded polyurethane....
  • Assembly is required. Instructions are provided to assemble the components into a complete fingerboard..
  • Backed by a Teak Guarantee. Includes free replacements for parts damaged or broken during shipping or setup. Includes free professional support for....
  • Choking Hazard: Small Parts. Not suitable for children under the age of 14..
Check Stock

SainSmart TPU Filament 1.75mm, 0.25KG (Blue+Red+Green)

  • What you get: SainSmart Flexible TPU Filament 0.25KG × 3: Blue+Red+Green.
  • 0.25 kg (approximately 0.55 lbs) per spool.
  • Recommended extruder temperature: 200 - 220°C.
  • Recommended platform temperature: 40 - 65°C.
  • TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible.
  • Compatible with all FDM printers on the market which accept 1.75 mm filament.
  • Including Prusa i8, Monoprice MakerSelect, SainSmart xCreality, and other RepRap printers.
  • Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more.
Check Stock

SainSmart - 101-90-160 Yellow Flexible TPU 3D Printing Filament 1.75 mm 0.8 kg Dimensional Accuracy +/- 0.05 mm

  • TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible..
  • Compatible with all FDM printers on the market that accept 1.75 mm filament. Including Prusa i3, Monoprice MakerSelect, SainSmart xCreality, WanHao &....
  • With proper settings, TPU is easy to print thanks to excellent bed adhesion and the filament’s tendency to not warp..
  • Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more!.
Check Stock

Longboard Speed Cobra Carbon Fiberglass Maple 10.11X37.16 Skateboard

  • Deck : 41 x 9inch / 104*22.8cm, L*W The decks are constructed using three layers of semi carbonised bamboo, and two layers of glass fiber with a symmetrical U shape, tip’n’tail design..
  • Trucks: The 50 Degrees, 7” unique casting trucks with double hardness, high rebound, polyurethane bushings, which will simultaneously ensure stability & provide rapid rebound support..
  • Wheels: 85% rebound 65mm X 51mm 78A Polyurethane wheels with rock finish, ABEC-7 high speed bearings.We present super practical T-shaped tools without assembly.
  • Grip: The "discus fish" segmented grip tape. The tip’n’tail of the board adopts OS46 grip tape, boasting coarse sand grains, the middle of the board utilises the wear-resistant OS780 grip tape.
  • We believe our customers are our beacon, so we offer 180 days after-sales maintenance and local customer support for all skateboards (excluding wearing parts), we would love to hear from our customers, we will reply to all customer information within 24 hours..
Check Stock

SainSmart - 101-90-158 White Flexible TPU 3D Printing Filament, 1.75 mm, 0.8 kg, Dimensional Accuracy +/- 0.05 mm

  • TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible..
  • Compatible with all FDM printers on the market that accept 1.75 mm filament. Including Prusa i3, Monoprice MakerSelect, SainSmart xCreality, WanHao & Qidi, and other RepRap printers..
  • With proper settings, TPU is easy to print thanks to excellent bed adhesion and the filament’s tendency to not warp..
  • Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more!.
Check Stock