ReviewsPop Socket Adhesive Replacement

Pops Sticky Adhesive Replacement for Car Mount, Volport 6 Pack 3M Dots VHB Sticker Pads Double Sided Tape for Socket Base and Magnetic Dashboard Cell Phone Holder with 2 Pack Round Metal Plate Discs

... for the base of expanding socket mount, collapsible grip stand, magnetic dashboard car mount, cell phone finger ring holder, wireless charger mount, dash cam mount, windshield mount.
Mini foam glue tapes high temperature resistant, no problem in hot/heat/warmth summer in florida. With this backup stickies adhesion replacement parts, you can replace and reattach phone socket wall mount and magnetic vehicle/truck/uber mount..
HOW TO USE 3M VHB ADHESIVE PAD: 1. Remove the used adhesive and clean up the mounting surface with alcohol pad if you have.
2. Peel off the yellow backing film, stick adhesive to the back of mount and press firmly for 3 to 5 minutes for better connecting to the car mount base.
3. Peel off the red backing film, stick on the flat and clean surface you want, then wait 24 HOURS to use after stuck, that’s it..
TIPS for USING 3M STICKY ADHESIVE: 1.If the red backing film hard to peel off and the black gel come up with, please repeat this act: peel-if come up-press red film back-peel again. 2.Do not stick adhesive on rugged, texture silicone surface, it may not stick well, clean flat and hard surface will be better. 3. Last but the most important point, please WAIT 24 HOURS after stuck..
2PCS EXTRA METAL PLATES: Extras tiny metal ....

Check Stock

[14 Pack]- Pop 3M Socket Sticky Adhesive Replacement with 2pcs Alcohol Pads, 3M VHB Double Sided Tape for Grip Holder and Magnetic Phone car Mount

[14 Pack Double-sided sticky pads for Pop Socket & Mount, Phone grip,etc ] Included 1.35 inch and 0.9 inch Double-sided sticky pads, which is proved to be the perfect size for pop socket, phone grip,finger ring holder, VAVA magnetic phone car mount. Also works for dash cam mount..
[Stick well on different material, even fabric] it can stick to anywhere there is a flat, hard and dry surface, like a Otterbox case, a lifeproof case, a case made of fabric, faux leather, PC, tempered glass, silicon or rubber, fiberglass, glass windshield,car dashboard, locker, mirror, refrigerator, bed post, wall and ect..
[Extra Strong & Durability, Hold 53oz For 11 Years] 3M VHB is made of polyacrylate, whose main chain is C-C bond.After testing, that makes it can hold anything with 53oz for 11 years, between 70°F and 100°F..
[Easily install] With 2pcs alcohol pads, remove the old adhesive without difficulty and residue. And with the special design of the adhesive paper, it is easy to peel off both sides..
[Strong But Thin] Only 1mm thickness makes it nearly invisible. With black strong 3M VHB, the tape is very sticky and lasts very long..

Check Stock

Water marble blue white wave pop socket for boys girls women

Who is searching for a colorful and nice looking cellphone holder or a tablet stand as a gift for christmas or birthday for a boys, girl, men or women? Perfect you found a water marble texture pop socket abstract design..
This Water marble blue white wave pop socket for boys girls women design finish every good looking outfit with a smart phone. With this marble chic texture pattern which can be seen as water color is a great gadget for girls, woman and boys present..
switch out your PopTop for another design or remove it completely for wireless charging capabilities. (Not compatible with Apple MagSafe wireless charger or MagSafe wallet.).
Expandable stand to watch videos, take group photos, FaceTime, and Skype handsfree..
Advanced adhesive allows you to remove and reposition on most devices and cases..
Note: Will not stick to some silicone, waterproof, or highly textured cases. Works best with smooth, hard plastic cases. Will adhere to iPhone 11, but not to the iPhone 11 Pro nor the iPhone 11 ProMax without a suitable case..

Check Stock

Socket Sticky 3M Adhesive Replacement Pads 8 Pack, for Phone Mount Base, Double Sided Adhesive Pads for Collapsible Grip, Dashboard, Wall, Flat Magnetic Holders |3M VHB Replacement Parts by True Decor

Socket Sticky Adhesive Replacement – car phone mount holders, and other dashboard mounting systems, this True Decor base adhesives restore grip strength and balance..
Strong, Double-Sided Adhesive – These 3M socket adhesives use high-quality tape backings to secure your phone mount or collapsible grip stand with stronger low and high-temperature resilience for year-round use..
Round, Precision Fit Design – We offer two different sizes in every stick adhesive replacement pack, including 1.4” and 0.9” circular pads, to ensure they suit your specific grip, mount, or device need..
Multi-Surface Application – Designed to adhere to a wide range of surfaces, our 3M double-sided tape is strong enough to stick to walls, car dashboards, windows, mirrors, nightstands, lockers, and more..
Universal Grip and Mount Compatibility – True Decor sticky adhesive tape can be used on bunch of different devices, such as a dash cam mount holder, 360 magnetic car mount, GPS navigation mounts, or collapsible phone sockets..

Check Stock

8pcs 3M Sticky Adhesive Replacement Pads for Socket Base Mount,VIIMAKE 1.38 inches Round 3M VHB Double-Sided Adhesive Pads,for Phone Collapsible Grip Stand Back Base Sticker Tapes Red

【Easy to Tear off】:We have upgraded the quality of 3M VHB black gel, the red film is easy to tear, unlike the red base film on the market, it is....
【Used for Socket Base】:Offers 8 Pcs adhesive pads(Diameter: 1.38 inches).This round double sided adhesive replacement parts designed for socket....
【Instructions for use】: ①Clean the area to be attached and keep it dry②When the tape is glued, apply the appropriate pressure evenly, please....
【Application Technology】:Replacement adhesive pads, with strong viscosity, good UV resistance, solvent resistance, softness and good....
【Important Note】:To achieve the bonding effect, the bonding surface must be clean and dry.Come with 4 pack alcohol pads help you clean the area....

Check Stock

Steelie Universal Adhesive Replacement Kit for Dash Mount + Phone Socket

UNIVERSAL ADHESIVE KIT FOR STEELIE MOUNTS – This kit contains replacement 3M VHB adhesives for all Steelie Dash Mounts, Steelie Magnetic Phone Socket, and Steelie Magnetic Phone Socket Plus.
SECURE HOLD – Attaches using strong and secure 3M VHB a confident hold.
REMOVEABLE – 3M VHB Adhesives can be removed easily without damaging surfaces.
EVERYTHING YOU NEED – This kit includes two Original Magnetic Phone Socket adhesives, two Original Dash Mount adhesives, two Dash Mount/Magnetic Socket Plus adhesives, one Mylar disc (for use with glass backed phones), and one alcohol wipe..
WORRY-FREE – all Nite Ize products are backed by our Worry-Free.

Check Stock

Kungfuking Pop Up Outlet Retractable Automatic Raising Type Recessed Outlet Surge Protector Power Strip with 2 USB Charging Stations and 3 AC Plug for Kitchen Countertops Conference Table

【Durable Material】: Pop up power strip outer casing is made of aluminum alloy, and interior of the socket is made of plastic, which is more durable than normal type of power strip, also looks exquisite..
【Electric Power】: Pop up power station Voltage: 125V-250V, Current: 10 A. This pop up outlets good for kitchen counters, office, conference room. But it cannot support high-power appliances, unable to support ultra-high power electrical equipment, like air conditioning, microwave..
【Easy to Install】: Cut a 4" hole in the countertop , remove the locking ring from the power socket, insert the socket into the hole, and tighten the locking ring from the bottom, then connect the power to start charging. And this retractable outlet hidden length is 14" , and the pop up length is 8.7", it can be install both vertical and horizontal. This automatic raising type pop up countertop outlets perfectly used as conference table outlet or kitchen outlet, keep counter tidy and clean..
【Easy to Use】: Press the surface and the socket will automatically rises/retract, after using the pop up electrical outlet , please close it , it's not waterproof pop up outlet, the top of the socket can waterproof splash, but the inside of power socket is non-waterproof, p....

Check Stock

10 of Pop VHB 3 m Sticky Adhesive Replacement Compatible, 3 m Sticker Pads for Car Magnetic Phone Holder Double Sided Tape for Collapsible Grip & Stand and More

8 pack 1.4inch VHB 3 m and 2 pack 1.2inch sticky adhesive exclusively designed for grip holder back and magnetic cell phone car phone mount base.
Double sided self sticky,This adhesive replacement kit is a good choice to remount your pop wall mount. With your pop wall mount, you can position the phone anywhere there’s a flat hard surface, like in the car dashboard, locker, bathroom mirror, refrigerator, bed post, wall etc.
Easy to use: You need to remove the used 3 m tape of popocket wall mount and clean up the mounting surface with alcohol pad included until fully dry before installation, then place a new 3m adhesive sticky circles on the back of pop grip and press firmly for 12 seconds for better connecting to the surface.
Alcohol Pads Provided: Clean the chosen area where you’d like to place your phone with alcohol pads..
Package include: 8+2 pack 3 m pop sticky adhesive gel, 2 pack alcohol pads.

Check Stock

PopSockets PopGrip with Swappable Top for Phones and Tablets - Black

Our durable Pop Socket compatible with iPhone, Samsung, and any other devices, we call a “PopGrip” is anti-drop, allows for one-handed use of your....
A little life-changer people like to call: a cell phone holder, phone gripper for back of phone, phone holder for hand, or whichever you name you....
PopSockets are compatible with all Popsocket phone accessories including wallets, cases, mounts, slides and non-Popsocket cases for phones.
Change up your PopGrip style without replacing the whole grip and swap out the top for one of our PopTops. Just press flat, turn 90 degrees until you....
Stick on with the adhesive and reposition as needed. Pop Sockets stick best to smooth hard plastic cases (may not stick to silicone, soft, or....

Check Stock

Suction Cup Phone Mount for Socket User, pop-tech Dashboard Car Phone Holder Cradle for Collapsible Grip with 7.5 Inch Long Arm Gooseneck & Anti-Shake Stabilizer Compatible with iPhone Samsung Galaxy

Perfect Fit for Socket Top - The multi-function automobile long arm phone holder cutout with u grip and downward shape we design is made of silicon and plastic combination with heat resistant and removable 3m sticker adhesive stick on. Soft silicone accommodate premium socket grips compressed and wallet plus easily glide into the slot hole and quick removal, even won't scratch like the plastic one. Great automotive accessories fits for official swappable collapsible grips & stand..
Ingenuity & Double Stability - Extra strong vacuum suction cup with antislip and super stick self-adhesive sticky gel, anti-shake stabilizer prevent android phone from vibrating and shaking, sticking it clamp more stable and lockable, apps to hold and tight your cell phone/tablet sturdy built in the car dash board or dashboard/window shield or windshield on multiple surface on desktop, countertop, desk or multi-surface as multipurpose phone holder sliding into the movable expanding grip..
Multifunctional & Flexible Bendable Arm - Universal long arm socket holder with sticky stuff allows you to attach and adhere to the cellphone within reach and adjust the flex extendable neck. Functional cell phone windshield mount with adhesion support for smart phone. Adjustable goose neck....

Check Stock

Automatic Raising Surge Protector Pop up Outlet Retractable Hidden Recessed Power Strip Power Socket 2 USB Charging Stations and 3 AC Plug with Wireless Charger for Kitchen Island, Conference Table

【Multi Outlet & Aluminum Alloy Housing】: Multi-function pop up power station built-in 3 US outlets & 2 USB charging ports & wireless charging function & 5.3 ft power cord. Pop up power strip outer casing is made of aluminum alloy, and interior of the socket is made of plastic, which is more durable than normal type of power strip, also looks exquisite..
【Wireless Charging】: With 5 W wireless charger, compatible with all Qi-enabled devices including from iPhone X, iPhone 8/8 Plus, Galaxy S9 / S9 + / S8 / S8 Plus / Note 8, Galaxy S7.
【Electric Power】: Surge Protector pop up power strip Voltage: 125V-250V, Current: 10 A , USB port: 5V/2.1A. --- Please note this power outlet cannot support high- power appliances, unable to support ultra-high power electrical equipment, like air conditioning, microwave..
【Easy to Install and Use】: Cut a 4" hole in the countertop , remove the ring lock and slide the body from top, screw the ring tight from bottom, then complete the installtion. Just push the surface of the power socket and it will automatically rises/retract. This outlet hidden length 14" , and pop up length 8.7", it can be install both vertical and horizontal (Please cautious on its size, the item might larger than your expect)..

Check Stock