ReviewsPop Socket Car Mount Dashboard

Sticky Adhesive Replacement for Windshield Camera Holder, AZXYI 6pcs 2.76''(70mm) VHB Circle Double-Sided Adhesive Tapes for Dashboard Suction Cup Mount, Mounting Disk Pads, Dash Cam/GPS/Sucker Holder

...rong both side clear adhesion pads' stickiness is 40% stronger than ordinary adhesive. The heat resistant performance of these circle adhesive double-sided mounting adhesive tapes for dash cam mount reaches 120°C+, you can use it without worry in hot Summer. Easy to fix on your car phone socket base, or heavy duty dashboard mount base, you can drive uber, truck, vehicle security in bumpy roads..
【6Pcs Clear Adhesives Replacement】We offer 6 Pcs round clear sticky adhesive pads(Diameter: 70mm, 2.75") for attaching dashboard pad mounting disk to your car dashboard . You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup..
【Cut into any size you need & Compatible With Suction Base】You can cut pads into smaller pieces if need. Compatible with most suction cup dashboard mount and other windshield long arm mount, GPS holder, EZ Pass/I-Pass/SunPass holder, camera mount, ETC, wireless charger base, dash camera mount holder etc on the market..
【Easy to Install】Provided rounded rectangle raised label to easily peel off the red release film of the adhesi....

Check Stock

Traxxas 8937 Steering Blocks Left & Right

CAR PHONE MOUNT: magnetic phone car mount grips tight with a strong magnetic socket & steel ball..
ANY ANGLE: swivels 360-degrees so you can find the perfect viewing angle on your phone or tablet..
EASY TO REMOVE: FastBall holds your device tight so to remove, simply give your device a slight tug!.
DEVICE HOLDER: use on your dashboard, kitchen counter, etc. to view your phone or tablet for the ultimate hands-free viewing..
INCLUDED: one (1) FastBall patented magnetic phone mount..

Check Stock

Car Phone Mount, [Thick Case & Big Phones Friendly] Air Vent Long Arm Suction Cup Phone Holder for Car Dashboard Windshield Universal Cell Phone Holder Compatible with All Mobile Phones

...n to unlock.The most precise internal gear and the thickest Silicone pad, Make sure to hold the phone firmly.The ultimate design greatly simplifies the operation of the mobile phone while driving, ensuring your driving safety..
[Two installation methods] The YITUMU car phone mount can be installed on the air outlet, dashboard or windshield, and can be used on any vehicle. It includes a suction cup base and a ventilation clip. The sturdy suction cup base has a sticky gel and an anti-shake stabilizer, which can firmly fix the bracket on the dashboard, and can firmly hold the phone even on a bumpy road..
[360° NO OBSTRUCT VIEWING] The 360° swivel and pivot ball joint gives you the ideal viewing angle and allows quick switching between portrait and landscape views. Adjustable telescopic arm accommodates desired length up to 9.84 inches (24.9cm), you can adjust the distance as you wish. Enjoy a safer and more relaxed driving experience while position your phone at the perfect angle..
[Strong Clamp Arm, Rock Solid Grip] Cell phone car holder that has a most strong clamping force of up to 48 LB (equivalent to 77 iPhone 12 pro max) on the market. Benefit from the thickest threaded anti-skid pad, precision gears, and springs, It which completely solves the com....

Check Stock

GOTWINY Pop Grip Car Phone Mount, Universal Air Vent Socket Mount Stand-Ultra Stable Vent Clip, Secure Grip Cell Phone Holder Car Mount for GPS Navigation-360 Rotating Head Fits All Smartphone

[Designed for Collapsible Socket]-This Car Grip Phone Mount is designed to hold phones with collapsible socket stand on its back. Compatible with any smartphone including iPhone 12 11 Pro Max XS MAX/XS/XR/X/8/8plus/7/7plus/6/6S, Samsung Galaxy S9, S8, S7, Note 9, HTC, LG, OnePlus, Moto G5, Google Pixel and more. (Collapsible Socket stand is not included).
[Never Fall Off, Double Stable Vent Clip]: The vent clip mount is designed with a combination of ''Hook Shape'' and ''Three Grasp Points'' on amazon. [ Stronger & Tighter ] The clip hook will catch one of the car air vent blades to achieve absolute fixation. This car phone holder has ''Three Grasp Points'' with thickened shockproof sponge and rubber, which could hold the phone steadier than others. Even on some rough roads, it can hold your phone firmly.
[360° Rotation & One-hand Operation] Simple one-handed operation. Press flat the socket mount on your phone and then slide it into the car grip mount.
easy to put it on or take it off quickly. The 360-degree rotation of pop out stand phone holder vent clamp provides with the best viewing angle to ensure a nice driving experience for you..
[STRONG AND SECURE ] Our car grips phone holder is the highest quality car socket phone mount. The clip phone moun....

Check Stock

URWOOW Flush Mount Cable Kit 3 ft USB 3.0 Male to Female and 2 RCA Male to 3.5mm Female AUX Extension Cable Dashboard Panel Dash Mount Port 3 feet

Designed for boat, vehicle and motorcycle, 2 RCA male to 3.5mm female extension flush panel mount waterproof cable, and USB 3.0 Male to Female cable.
Apply on an existing hole or cut a new one on your dashboard and clip in the socket to flush mount it to your vehicle's, boat’s and motorcycle’s....
Mount cable can be used above the base of the car's dashboard or on the other dashboard, such as boat,motorcycle.
Very convenient for vehicles indash Radio with RCA Audio to 3.5mm AUX or USB Input mount.
Flush Mount Diameter X Height: 1.26" X 1.77" with 3 feet - 1 meter long cable, perfectly fits in 28 to 30 mm hole.

Check Stock

Pops Sticky Adhesive Replacement for Car Mount, Volport 6 Pack 3M Dots VHB Sticker Pads Double Sided Tape for Socket Base and Magnetic Dashboard Cell Phone Holder with 2 Pack Round Metal Plate Discs

ADHESIVE PADS FOR DASH MOUNT: 6pcs small 3M circles dots kit is designed for the base of expanding socket mount, collapsible grip stand, magnetic dashboard car mount, cell phone finger ring holder, wireless charger mount, dash cam mount, windshield mount.
Mini foam glue tapes high temperature resistant, no problem in hot/heat/warmth summer in florida. With this backup stickies adhesion replacement parts, you can replace and reattach phone socket wall mount and magnetic vehicle/truck/uber mount..
HOW TO USE 3M VHB ADHESIVE PAD: 1. Remove the used adhesive and clean up the mounting surface with alcohol pad if you have.
2. Peel off the yellow backing film, stick adhesive to the back of mount and press firmly for 3 to 5 minutes for better connecting to the car mount base.
3. Peel off the red backing film, stick on the flat and clean surface you want, then wait 24 HOURS to use after stuck, that’s it..
TIPS for USING 3M STICKY ADHESIVE: 1.If the red backing film hard to peel off and the black gel come up with, please repeat this act: peel-if come up-press red film back-peel again. 2.Do not stick adhesive on rugged, texture silicone surface, it may not stick well, clean flat and hard surface will be better. 3. Last but the most important point, please....

Check Stock

Air Vent Phone Holder for Socket Mount pop-tech 360° Rotation Vent Clip Car Mount Silicone with Adjustable Switch Lock for Collapsible Grip / GPS Navigation & 3M Sticky Adhesive for Expanding Stand

Switch Lock Design - Universal socket car vent mount has a swivel feature for better adjustment according to the changeable vent widths. The strong....
Adjustable 360 Rotation - Car vent clip phone holder accomodates for socket that support you to rotate the android at unobstructed viewing from....
Durable & Sturdy - Flexible silicone air vent car mount cutout work with collapsible grip & stand is made of soft rubber and well made extremely to....
Easy To Use - Put screw to the rotating swivel ball joint and connect to the pivoting socket car vent mount, insert into the circular air vent outlet.....
What You Get Rich Combo - pop-tech single amazing locking air vent car mount plain black compatabe socket mount users & heat resistant 2 pack....

Check Stock

pop-tech Sticky Adhesive Pad Replacement for Car Dashboard Magnetic Phone Mount Base, 8pcs 3M VHB Double Sided Sticker Heat Resistance Tape for Magnet Cellphone Holder & Windshield Dash Cam

【Compatible with Various Kinds of Dashboard Magnetic Mounts】 Pop-tech's extra adhesive tapes are made with 3M HVB original adhesive. When the base of your dashboard magnetic mount loses its stickiness, replacing the adhesive on the base of the holder is the best way. And our super sticky adhesive tape is your best choice! These magnetic dashboard mount base replacement sticky adhesive compatible with Wizgear, Scosche, Bextrix, APPS2Car, Trainium, etc..
【Adhesive size】 Rectangle : 1.85" * 0.87", the thickness is 0.047". Perfectly suitable for 95% of dashboard mounting bases. It can be pieced together or cut to replace the base sticker tape of driving recorder, dash cam, ring grip mount, automotive windshield sticky mount, smartphone holder, audio DAC! Versatility: Stickers can be affix on flat hard surfaces, such as home bathroom mirrors, refrigerators, bedposts, walls, lockers, offices, dashboards, windscreen..
【Very High Bond Stickiness & Heat Resistance】 Pop-tech's rectangular adhesive tape uses the most advanced silicone adhesive synthesis technology, and its steady viscosity is 40% higher than ordinary adhesive tapes. High tem....

Check Stock

8 Pack Sticky Adhesive Compatible with Socket Mount Base, PKYAA Double-Sided Replacement Tape for Car Magnetic Phone Holder, 4 Pack Sticker Pads for Collapsible Grip & Stand Base

...esive surface before use and let it dry, free of contaminates. And wait at least 24 hours to use after stuck. First peel off the white side of the adhesive and stick it to the car mount base. After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car mount to your car dashboard..
【Durability】These Double-sided stickers roll with pressure sensitive adhesive bonds almost instantly with no drying time. It also resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind..

Check Stock

ZRAMO CA215 Car Windshield Suction Cup Mount for Garmin Nuvi 42 42LM 44 44LM 52 52LM 54 54LM 55 55LM 55LMT 56 56LM 56LMT 2457LMT 2497LMT 2577LT 2597LM 2597LMT 2558LMTHD 2598LMTHD GPS

Brand ZRAMO and High Quality Garmin GPS Mount.
Includes the round Nuvi adapter that snaps onto the back.
Sticky GelBase Suction mount will allow you to mount the holder to your dashboard with out to sticking a permanent disk on to your dashbaord.
Ball Joint and Socket Design to allow the best Viewing Experience.
No Tools Required for Installationm just pop in the cradle in to the suction mount and place on to your windshield or dashboard.

Check Stock

VOLPORT Extra 3M Super Sticky Adhesive and Phone Magnet Sticker Disc Replacement Strong for Reusing Grip Stand Socket Base, Circle Double Sided Car Mount 3M Tape Glue Pads Round Magic Metal Plate Disk

... FOR PHONE SWAPPABLE GRIP&STAND: VOLPORT brand multiple 3M circular double side tapes sticky adhesion disk is designed for repairing expanding phone ring holder and replace magnetic phone car mount. Heavy duty two sided circle stickies adhesives fit regular size collapsible socket stand base & replaceable dashboard car holder’s back.
metal plates can be fit inside of lids or outside of the caps top. Best backup replacement adhesive parts to reattach socket grip to new iphone 11 case..
STRONG DOT ADHESIVE STICKY REPLACEMENT: We adopt original 3M VHB super adhesive black gel, stickiness is 40% stronger than cheap universal glue, high temperature resistance in hot Summer. 6pcs big round double side tape sticky foam adhesive tabs stuff for resticking collapsible grip and finger rings stand.
2pcs additional high bond small dots mini circle discs attachment for reusing the bottom of phone socket mount, repositionable magnetic dashboard car phone mounts, reinforce dash cam mount..
HOW TO REPLACE ADHESIVE: 1. remove old adhesive and clean surface with alcohol prep pads, let dry, then stick adhesive on holder. 2. peel off the red backing film, this is the most difficult part, many customer said the adhesive part with come up with when peel off....

Check Stock