ReviewsPorcelain Tile Hole Saw

uxcell 45mm Diamond Coated Glass Hole Saw Drill Bits for Ceramic Tile Marble Rock Porcelain

  • SIZE - 45mm(1.8-inch) Drilling Diameter, 10mm(0.4-inch) Shank Diameter..
  • DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp..
  • NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance..
  • SPECIAL DESIGN - Slotted edge makes it more sharp, works more efficient. Side open can remove the waste to keep the drill bit clean..
  • APPLICATIONS - Perfect for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, light stone and fiberglass. (Need to be used at a low speed.
  • Always use lubrication (water) when processing, otherwise the hole saw will burn.).
Check Stock

1 inch Diamond Drill Bit Concrete Diamond Hole Saw Masonry Core Drill Bit Heavy Duty for Brick, Cinder Block 3/8 inch Standard Shank Rotary Tools

  • Industrial heavy duty, commercial quality, durable 1 inch core drill bits for concrete, exactly 1 inches diameter.
  • Concrete hole saw with 2 in depth of cut and standard 3/8 inch shank for standard cordless or electric drill.
  • 1 in concrete hole saw dry or wet use drilling holes in concrete block, brick, stones, basement walls, foundations, tile, marble, granite countertop, ceramic, porcelain, stucco, slab, slate.
  • 1 inch concrete core saw hammer drill bits for concrete.
  • Laser welded concrete hammer core bit fits your standard drill..
Check Stock

ROCKPORT Combo 4 1/2 Diamond Blade for Angle Grinder Set - (3 Pack) Diamond Saw Blade & Grinder Blade for Dry/Wet Tile, Diamond Cutting Wheel for Stone, Granite, Concrete, 5/8\ - 7/8\ Arbor Tile Blade

  • CUTS THE TOUGHEST MATERIALS: Our 4 1/2" diamond blades for angle grinders are constructed with the highest precision so our diamond saw blades cut through porcelain tile, roof tile, brick, concrete, granite, marble, ceramic & masonry..
  • LONG LIFE: Built from high carbon steel with a diamond outer ring, our 4 1/2 inch diamond tile saw blades provide one of the longest lifetimes in the industry. Our grinder saw discs are diamond impregnated to minimize vibrations and breakage..
  • COMBO PACK FOR OPTIMIZED PERFORMANCE: Our 4 1/2 inch diamond blade & tile blade combo pack includes: Turbo, Continuous and Segmented tile blade 4 inch. These saw diamond blades ensure you have the right disc for the job..
  • COMPATIBLE WITH A VARIETY OF TOOLS: Our 4 1/2 inch saw glass tile diamond blades for porcelain have a 5/8 inch arbor making them compatible with tools such as: grinders, angle grinders, rock saw blades & concrete saws..
  • PROUDLY AMERICAN OWNED: Rockport products are American-owned and operated. With an enduring commitment to quality and design, we’re honored to be trusted by you and promise to always deliver lasting products to our loyal customers..
Check Stock

Diamond Hole Saw 60mm 2-3/8 inch with Center Drill Bit for Ceramic,Porcelain,Tile,Glass,Granite Quartz,Marble,Gemstone

  • Diamond drill bit is diameter of 60mm 2-3/8 inch.the cutting depth is 1.06 inch..
  • The shank of the diamond hole saw is round of 3/8" can fit for the 3/8" chuck..
  • Good quality of diamond,and with special design,there is a center drill bit for positioning function, which is convenient to guide the hole saw,after form the hole..
  • Beautiful appearance,excellent antirust function by chrome plating treatment..
  • Excellent results in Ceramic,Porcelain,Tile,Glass,Granite Quartz,Marble,Gemstone.
  • We suggest using water to cool the diamond drill bit to prevent overheating..
Check Stock

Diamond Hole Saw with Center Drill Bit for Ceramic,Porcelain,Tile,Glass,Granite Quartz,Marble,Gemstone (110mm 4.33inch)

  • Diamond drill bit is diameter of 110mm 4.33inch.the cutting depth is 1.06 inch..
  • The shank of the diamond hole saw is round of 3/8" can fit for the 3/8" chuck..
  • Good quality of diamond,and with special design,there is a center drill bit for positioning function, which is convenient to guide the hole saw,after form the hole..
  • Beautiful appearance,excellent antirust function by chrome plating treatment..
  • Excellent results in Ceramic,Porcelain,Tile,Glass,Granite Quartz,Marble,Gemstone.
  • We suggest using water to cool the diamond drill bit to prevent overheating..
Check Stock

5-1/2 Inch Diamond Hole Saw Drill Bit Ceramic Porcelain Glass Granite Marble Tile Tiling 5 1/2 Inches in 5 1 2 inch

  • Diamond Coated Hole Saw Drilling Holesaw Tool 5 1/2" - Larger Than 5 Inches.
  • EASILY Cuts Through Ceramic and Porcelain Tile - Glass, Marble, Granite, Quartz - USE WATER TO COOL.
  • Use with Any Electric Drill - Diamond Circular Hole Saw for Floor Drain, Shower, Shower Mixing Valve, Shower Drain Installation.
  • Drills 1 inch deep - Wet Type - Do not use dry - No Pilot Drill Bit - Pilots are not required.
  • Cylindrical Shank 3/8" - No Need for Adapters or Arbor.
Check Stock

4-1/2 inch Diamond Concrete Hole Saw Masonry Core Drill Bit Heavy Duty for Brick, Cinder Block Standard Shank for Cordless Electric Drills 4.5 inch Diameter Includes Positioning Guide Template

  • Durable 4.5 inch core drill bits for concrete, exactly 4.5 inches diameter. Tool Life: 7 to 10 holes in concrete..
  • Concrete hole saw 4-1/2 inch with 2 inch depth of cut and standard 3/8 inch shank for standard cordless or electric drill.
  • 4-1/2 in concrete hole saw dry or wet use drilling holes in concrete block, brick, stones, basement walls, foundations, tile, marble, granite countertop, ceramic, porcelain.
  • Includes Positioning Guide Template Also Holds Cooling Water.
  • Laser welded diamond concrete core bit fits your standard drill. If abused, this hole saw will no last more than a few uses..
Check Stock

uxcell 2 Pcs 25mm Diamond Coated Hole Saw Drill Bits for Glass Ceramic Tile Marble Rock Porcelain

  • SIZE - 25mm(1-inch) Drilling Diameter, 8mm(0.31-inch) Shank Diameter, Drilling Depth: 28mm.
  • DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp..
  • NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance..
  • SPECIAL DESIGN - Slotted edge makes it more sharp, works more efficient. Side open can remove the waste to keep the drill bit clean..
  • APPLICATIONS - Perfect for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, light stone and fiberglass. (Need to be used at a low speed.
  • Always use lubrication (water) when processing, otherwise the hole saw will burn.).
Check Stock

Hole Saw Guide, Multiple Sizes Unique Design Sturdy Durable Hole Saw Guidance Fixture for Glass Drilling

  • Unique Design: This tile glass hole saw guide is designed to locate and drill drill glass, ceramic tiles, marble, etc..
  • Multiple Sizes: This tile glass hole saw guide is applicable 4 to 12mm holes, meeting your different needs..
  • Premium Material: This tile glass hole saw guide is made from premium ABS and rubber material, which is sturdy and durable..
  • More Convenience: Suitable for those hard to get awkward areas, such as drilling horizontally in tiled wall or vertically in floors..
  • Firm Attachment: This tile glass hole saw guide attaches to most tiled surfaces by means of its lever operated vacuum base..
Check Stock

JIECHENG Brazed Diamond 1-1/4 inch Hole Saw with Center Drill Bit for Ceramic,Porcelain,Tile,Glass,Granite Quartz,Marble,Gemstone,Dry Drilling 32mm

  • Brazed diamond hole saw 1-1/4 inch (32mm),the cutting depth is 35mm 1.38 inch.
  • Dry drilling is ok for Ceramic,Porcelain,Tile,Glass,Granite Quartz,Marble,Gemstone.
  • Special design with a center drill bit for positioning function, which is convenient to guide the hole saw.
  • Beautiful appearance,excellent antirust function.good quality of diamond..
Check Stock

JINGLING 50mm 2\ inch Diamond Drill Bit Hole Saw for Glass Tile Ceramic

  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
Check Stock