ReviewsPort Ball Valve

Wilkins 115-975XL2 1.5-Inch Lead Free Reduced Pressure Backflow Preventer

  • Reduced pressure principle backflow preventer consisting of a pressure differential relief valve located between twoindependently operated spring-loaded center guided check valves, “Y” pattern body.
  • Complete with two full port resilient seated ball valves for shut-off and four resilient seated ball valve test cocks.
  • Pre-plumbed backflow station. Assembly can be of the reduced pressure principle or of the double check type.
Check Stock

Motorized Ball Valve- 1/2\ Brass Ball Valve with Full Port, 9-24V AC/DC and 2 Wire Auto Return Setup by U.S. Solid

  • SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable.
  • The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last.
  • NPT THREADING-½” quality brass thread, manufactured and measured according to National Pipe Thread standards.
  • This electrical ball valve is full port, meaning the bore in the ball is a full1/2”.
  • This minimizes pressure loss through the valve.
  • 9V-24V AC/DC- Works effectively over entire voltage range.
  • Limit switch minimizes power after valve is fully open.
  • Ideal for projects where an automatic return is necessary.
  • 2 WIRE AUTOMATIC RETURN SETUP- Simple two wire connection, valve largely de-energizes after opening.
  • Returns to fully closed if power is removed.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time.
Check Stock

Motorized Ball Valve- 1/2\ Brass Electrical Ball Valve with Full Port, 9-24V AC/DC and 3 Wire Setup by U.S. Solid

  • SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable.
  • The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last.
  • NPT THREADING-½” quality brass thread, manufactured and measured according to National Pipe Thread standards.
  • This electrical ball valve is full port, meaning the bore in the ball is a full 1/2”.
  • This minimizes pressure loss through the valve.
  • 9V-24V AC/DC- Works effectively over entire voltage range.
  • No power expended once fully open or fully closed.
  • 3 WIRE, 2 POINT CONTROL SETUP- Simple three wire connection, with two points of control.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time.
Check Stock

New FloodStop for Water Heater/Whole House FS 1.00-NPT v4 Lead Free

  • Motorized Full-Port Ball Valve (1 inch NPT pipe threaded, valve length: 4 inches).
  • Control Unit (uses Battery Backup 4 X AA Size not included).
  • One output contact (normally open) that can be connected to an Alarm, Home Automation or Auto-Dialer systems if desired.
  • Output Contact Wires - approx 3ft to valve and approx 7ft to sensor.
Check Stock

R134A R410A R12 R22 Refrigeration Charging Hose Set with Ball Valve 3 Color Coded Hoses/w Ball Valve 1/4 SAE Thread Connector for Air Condition Refrigeration Charging Tools AC HVAC Maintenance Kit

  • WIDE APPLICATION --- Standard refrigeration charging hoses with 1/4" SAE male and female thread for refrigerants R134A, R22, R12, R502, R404..
  • HIGH WROKING PRESSURE --- 7" length ball valve hvac charging hose completed with solid brass manual shut-off ball valve. Rated working pressure: 3000....
  • PREFECT DESIGN --- HVAC hoses with ball valves designed to meet standard 1/4 inch SAE female refrigerant charging hoses set with shut off of red, blue....
  • EASY INSTALLATION --- R22 charging hose and ball valve set design with 45 degree angle on the service port site for easier access. Can be operated....
  • PREMIUM QUALITY --- Refrigerant hose made of high-quality brass alloy and rubber, last long. Strong sealing for durability and safety. Necessary tools....
Check Stock

FloodStop FS-3/4-C Automatic Valve for Water Heater

  • Motorized Full-Port Ball Valve (3/4 inch compression ends).
  • Control Unit (with Battery Backup 4 X AA Size).
  • One output contact (normally open) that can be connected to an Alarm, Home Automation or Auto-Dialer systems if desired.
  • Output Contact Wires - approx 3ft to valve and approx 7ft to sensor.
Check Stock

MASTERCOOL 81490 R134A Valve Core Remover Installer yellow gold 6.8 inch for Standard 5mm valve cores only

  • 100% U.S. designed, assembled and tested.
  • Designed for use of servicing valves in R134a systems with standard sized 5mm valve cores.
  • For high (16 mm) and low (13 mm) service port standard type valve.
  • Access and change valve cores while the A/C system is still filled with refrigerant. Overall diameter-1 1/4 inches, length, retracted- 4 3/4 inches,....
  • Stainless steel ball valve design and patented thread remover lets the user block off the system while changing the valves cores, allowing for no....
Check Stock

New FloodStop Multi-Purpose FS 1/2-NPT v4 (Lead Free)

  • Motorized Full-Port Ball Valve (1/2 inch NPT pipe threaded).
  • Control Unit (with Battery Backup 4 X AA Size).
  • One output contact (normally open) that can be connected to an Alarm, Home Automation or Auto-Dialer systems if desired.
  • Output Contact Wires - approx 3ft to valve and approx 7ft to sensor.
Check Stock

R410A R22 Valve Core Remover & Installer with Dual Size SAE 1/4 & 5/16 Port Air Conditioning Line Repair Tools for R404A R407C R134A R32 HVAC System

  • CONNECTION ----- The dual size 1/4" & 5/16" SAE valve core remover and install tool can adapt to R22/R134/R410/R32R air-condition, external bypass port design can remover valve cores. Works great for both Minisplit systems as well as 1/4" service valves on split systems..
  • EASY INSTALLATION ----- The Schrader's core grabber with disconnect valve, the tool can be easily inserted into the inner valve core for removal or installation. Built-in disconnect valve for easy operation, no need to stop the machine, no need to release the refrigerant..
  • PERFECT DESIGN ----- The valve core remover installer tool is made of pure copper.
  • The metal knob is all designed with anti-slip design. Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a slower to operate stem-type valve. (No Gas Loss)..
  • GREAT FUNCTION ----- Shut-off Ball value handle, metal schrader cap, schrader's core grabber tool, built-in magnet at the bottom base. Please close the valve and disconnect the air conditioner before removing the valve core..
  • 2-YEAR WARRANTY ----- Order from SURIEEN, we offer 2-YEAR WARRANTY, true worry-free shopping experience. If you are not satisfied with the item please contact us ask for a replacement or refund in limit....
Check Stock

1/2\ Float Ball Valve Automatic Fill Feed Humidifier Tank Pond Shut Off with Adjustable Arm for Ponds, Livestock Water Trough

  • The mini float valve is durable with adjustable arms, made of hard ABS, will not corrode or rust.Non-toxic, tasteless, and can be used for drinking water. 1/2in BSP valve..
  • No power or pump required: the water float ball valve is suitable for low pressure gravity feeding systems, leak-free operation is achieved by hand tightening..
  • Auto Fill Valve is perfect for both permanent and temporary installations..
  • Package includes:1 pack tank float valves.
Check Stock

RAINPAL RBS024 Brass Rain Barrel Spigot (LF Compliant 3/4' Quarter Turn Ball Valve w/ Bulkhead Fitting and Thread Tape, 7 GPM)

  • Top Feature: Large 13mm Flow Port (7GPM), Large 3.5 inch Stainless Steel Handle. Freeze Proof.
  • ATTENTION: REVERSE THREADED FITTING NUT, Turn CLOCKWISE to LOOSEN..
  • 3/4" Solid Brass Quarter Turn Valve w/ Brass Female 3/4" Bulkhead Fitting.
  • FEATURES: Lead Free Compliant Brass, Quarter Turn Ball Valve, Large 3.5" Stainless Steel Handle, Stainless Steel Nut, Freeze Resistant, Large Flow Port(7 GPM tested with 2 ft water), Recessed Rubber Gasket won't Pop Out.
  • SPECS: Bulkhead fitting need 32mm or 1-1/4 inch diameter hole to install. Fit up to 0.4 inch Thickness Wall(Works great for 55 gallon used plastic drum barrels on craigslist). Large 13 mm Port, Heavy and Heavy Duty, Net Weight: 11.5 oz.
  • Compare Design, Compare Material, Compare Weight, Compare Build Quality, and Choose RAINPAL, Life Time Warranty Against Leak, Break or Crack..
Check Stock