ReviewsPortable Brazing Set

Propane Torch with Hose 3.6FT, Mapp Gas Torch Self Ignition Trigger, Welding Gas Torch for Brazing, Soldering, HAVC, Jewelry, Heating, Plumbing

  • GAS CYLINDER USE-Portable propane torch with a push button igniter, can be used with propane, mapp gas or map-pro..
  • LARGE DIAMETER BRAZING-Propane torch comes with high intensity swirl flame puts out Maximum focused heat for large diameter brazing, soft solding,HAVC,jewelry and freezing pipes project..
  • 3.6 FT HOSE INCLUDED-3.6' long hose and ergonomic handle design, provide more working flexibility and comfortable grip. The propane torch can be used with cylinder clamps and secure the gas cylinder at any convenient places, just take the mapp gas torch and work around..
  • EASY TO USE-Adjustable flame size control knob, you can switch the flame modes for different job needs by adjust the air input amount..
  • REAL DURABGLE-Propane torch main body are constructed with Full Brass for ouput and wear resistant.This hose torch is designed as self-ignition.Hassle-free to use for professionals and home owners..
Check Stock

J.W. Harris Company 40022 Stay-Silv White Brazing Flux

  • It is a powder flux formulated for brazing gold and silver..
  • Jar of welding powder brazing flux powder welding cast consumables jewelry weld repair supply.
  • There are 250 grams in this jar, which will definitely meet your needs..
  • The powder melts at 700 degree centigrade.​.
  • Brazing powder improves the weldability of metal in the process of high temperature welding..
Check Stock

10 Rods Copper Brazing Rod 15.7 Low Temperature Welding Rod Welding Consumables with Good Liquidity for Welding Refrigerator Air Conditioner Copper Pipes Copper Products

  • MATERIAL: 10 Rods copper brazing rods 15.7” are included in the package. The chemical composition of the brazing rods: Phosphor (P): 7%, Copper (Cu): the remainder..
  • ADVANTAGES: Brazing temperature range: 1310°F-1490°F. Solidus: 1310°F, Liquidus: 1490°F. Tensile Strength ( RM): 838 MPa. The PhosCopper brazing rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can also be opened for easy storage and use..
  • APPLICATION: High-quality copper brazing rod are used for the welding of refrigerator copper pipes, air conditioner copper pipes and copper water pipe, as well as for the electromechanical industry..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you better..
Check Stock

K-T Industries 2-2750 Brazing Flux, 0.5 lb

  • Price For: Each Tensile Strength (PSI): - Type: - Contents: 56% Silver, 22% Copper, 17% Zinc, 5% Tin Container: - Application: For Ferrous and Non Ferrous Alloys Good for Stainless Steel Includes: 1 oz Brazing Wire and 1.75 oz White Flux Item: Brazing Kit Material: Safety-Silv-56 Dia. (In.): 1/16 Length (In.): - Brazing Range (F): 1145 to 1205 Standards: AWS A5.8, Bag-7, NSF 51.
  • Country of Origin (subject to change): United States.
Check Stock

Silver Brazing Rod BCuP-5 20 Flat Bar Welding Stick JAgP-15 15% Silver Phos Welding Rods 0.050 x1/8 x14 for Air-conditioners Refrigerators and Freezers

  • Material: The package includes 20PCS 15% Silver Brazing Rods BCuP-3.Silver (Ag) 4.8-5.2%.
  • Copper (Cu): Rest. For the best results..
  • Standard: The BCuP-5 silver brazing rod containing 15% silver, is equivalent to the American standard AWS BCuP-5 national standard BCu88PAg and L205. It has certain plasticity and is suitable for welding of copper and its alloy joints that cannot maintain a tight fit. Melting point 645-815 degrees Celsius..
  • Advantage: The low temperature phosphor silver welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 704-816℃, good fluidity during welding, molten metal can flow to small gaps.
  • Application：The brass brazing rod is used for brazing of silver & silver alloy in motors, air-conditioners, meters, and refrigeration industry,Widely used in brazing of copper and copper alloys in electrical machinery, electrical appliances, glasses and other industries.
  • Service: Fox Alloy Time-proven formulation.
  • A team of experienced welding engineers ready to answer all your welding questions.
Check Stock

Witonics Capacitor Replacement Kit for Hyundai X93W with Soldering Tools

  • Professional contractor grade oxyacetylene welding and brazing outfit.
  • Two Welding/Brazing Tips for brazing up to 1-Inch copper tubing and welding up to 1/8-Inch steel.
  • Single stage Patriot series regulators with protective rubber gauge boots.
  • Front valve welding handle with stainless steel ball point valves for accurate gas control.
  • Welding Goggles with flip up lenses and are designed to accommodate prescription eyewear.
Check Stock

HZ-8394 Hosed Torch+1/2 lb 19 pcs 15% Silver Phos Copper Brazing Alloys Welding Rods

  • Various kinds using oxygen and gas fuel for portable welding, rivet cutting, soldering, brazing.
Check Stock

Thermaltake 240mm Pacific DIY Liquid Cooling System R240 Radiator Cooling CL-W009-AL00BL-A

  • Optimized Heat Dispatching: Thermaltake R Series Radiators deliver an average heating load of 32℃-35℃. After brazing, the fin and tube connect to form a joint, thereby creating uniform heat transfer..
  • Slim Form Factor Design: R Series is a slim radiator with a 13-set flat tube design to increase heat transfer. Water flows down on one side, and then circulates back to the other side of the radiator..
  • High-Density Fin Design: The cooling performance improves significantly with increased fan speed, offering exceptional cooling performance during operation. FPI (fin per inch): 17..
  • German-Made Anti-Corrosion Materials: Designed with German aerospace-grade materials and constructed with zinc. Corrosion potentials of aluminum alloy with zinc can be reduced by 55.6% after brazing..
Check Stock

BLUEFIRE MRAS-8210 Super Jumbo Turbo Flame Propane Gas Welding Torch with 5' Hose Fuel by MAPP MAP Pro Propane Great High Intensity Nozzle Head for Soldering Brazing Large Dia Copper Pipe

  • ...s include flint spark lighter and handy clip..
  • MOST POWERFUL - Patent Burner Head design applied the cutting edge Aerodynamic Jet Technology to turbo accelerate the mixed fuel gas flow, produce a much larger and hotter cyclone flame than most ordinary propane torches. A high output of 25,388 BTU/hr makes this little portable torch one of the most powerful gas torch available on market..
  • LARGE DIAMETER BRAZING - The jumbo size flame cone is capable to surround large diameter copper pipes up to 1.5 inch. When brazing, this feature will assure the whole welding joint to be evenly heated and easily turn into red within short time. The maximum temperature can reach up to 2527°F, meet your needs for almost all brazing job!.
  • 5 FT HOSE INCLUDED - 5' long hose provides more working flexibility. You can secure the gas cylinder at any convenient places, just take the torch and work around, allowing more freedoms and working safeties..
  • SAFE TO USE - This torch is equipped with multiple safety designs, such as Anti-Flare, pressure stabilized regulator and Auto Shut-Down Safety Control. Your working safety is our First Priority!.
  • EASY OPERATION - Adjustable flame size control, and also equipped with Hard/Soft Flame Switch, you can switch the flame modes to best fit fo....
Check Stock

Diablo D1260CF 12-inch Steel Demon 60T Cermet II Carbide Ferrous Metal Saw Blade

  • Cermet Blend Teeth for cutting metal withstands impact, reduces wear, and lasts up to 3X longer than standard carbide..
  • Improved Laser Cut Stabilizer Vents trap noise and vibration for maximum stability, keeping it cool and accurate in metal cutting applications..
  • Triple Chip Metal Cutting Grind designed to maximize life, speed, and durability, giving burr-free cuts in metal cutting applications.
  • Tri-Metal Shock Resistant Brazing a three metal brazing system allows metal cutting carbide tips to withstand extreme impact for maximum durability.
  • Spark free Cold Cutting blades are “Hot work” compliant saving you the time and hassle of obtaining a Hot Work permit for jobsites (Check local laws).
Check Stock

WeldingCity 4-pcs Low Temperature Flux Cored Zinc/Aluminum (Zn98-Al2) Brazing Rod 20″ for Joining Al-Al/Cu Alloy in HVAC/Heat Exchanger

  • Premium quality flux cored low temperature Zinc/Aluminum 20″-long brazing rods Zn78-Al22, Zn98-Al2 and Zn92-Al8 series for joining Al-Al and Al-Cu alloy in HVAC, heat exchanger and refrigeration repairs..
  • Flux core means no manual flux application required. Non corrosive flux and ensures good oxidation protection and capillary fill. Ideal for joining aluminum alloys of the 1000, 3000, and 6000 series as well as aluminum to copper welding..
  • Good replacement to equivalent products such as Lucas Milhaupt AL822/AL802 and Harris Aluxcor Zinc-Aluminum brazing filler metals, etc..
  • Brazing rod dimension: 20-in (500mm) length and .078″ (2.0mm) diameter.
  • brazing temperatures as shown in spec. table in picture. Available packages: 4-pcs, 1/2-lb and 1-lb..
  • U.S. based welding supplier. Strong technical support with experienced customer service to address buyer’s any question..
Check Stock