ReviewsPortable Cold Cut Saws

CMT 236.004.07 ITK PLUS Diamond Saw Blade for Fiber Cement Products, 7-1/4-Inch x 4 Trapezoidal Teeth with 5/8-Inch003c003eBore, PTFE Coating

For very long-lasting cuts, up to 60 times longer than carbide blades..
For portable circular saws/miter saws. Cut fiber cement & plasterboard..
0.067 kerf thickness, 0.055 plate thickness, 12° hook angle, Trapezoidal Grind..
SinterHip High-density carbide teeth to prevent from any material failure. Longer cutting life..
Thin kerf allows for smoother cuts and more cutting speed. New standard for performance and value..

Check Stock

Weaver Curved Saw Scabbard 27 With Snap Hook, Black

JAPANESE AZEBIKI SAW: Azebiki Saw is used to cut holes, mortises, grooves in mid-panel, and sliding dovetails. These saws are also useful for working in restricted areas without damaging adjacent work—Japanese essential carpentry tools..
UNIQUE ROUNDED BLADE: The curved blade allows you to start cutting while cutting into a flat surface. The moderately short blade is a real virtue. You can get it into corners that were impossible to reach with any previous saw..
RYOBA DOUBLE-EDGED: Double-edged pull saw for both rip cut and crosscut. You can enjoy silky smooth cutting regardless of the wood grain. All KAKURI saws are manufactured in Japan and handcrafted by Japanese craftsmen..
RAZOR SHARP JAPANESE STEEL BLADE: The blade is made of Japanese steel and you can enjoy the effortless cutting. Japanese saws are used with a pulling force, and their sharpness results in a clean-cut..
PRODUCT SPECIFICATIONS: Made in Japan / Blade: Japanese high carbon steel / Handle: Japanese wingnut, Cane / Blade Length: 3.5" / Blade Thickness: 0.015-0.031" / Kerf Width: (Rip-cut) 0.031", (Cross-cut) 0.039" / TPI: (Rip-cut): 7.3, (Cross-cut): 15.3 / Overall Size: 15.8" 2.5"×0.7" / Weight: 2.5 oz.

Check Stock

CMT 251.042.10 ITK XTreme General Purpose Saw Blade, 10-Inch x 40 Teeth ATB Grind with 5/8-Inch Bore

For fast crosscuts on wood and plywood. Good rip cut on wood..
To be used on radial arm saws, miter saws, table saws for cutting soft/hard wood and plywood..
0.098 kerf thickness, 0.071 plate thickness, 15° Hook Angle, 1 Flat + 2/15° alternate teeth Grind..
Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
Laser-cut plate features expansion slots to reduce noise and anti-vibration design..

Check Stock

CMT 251.045.12 ITK General Purpose Saw Blade, 12-Inch x 45 Teeth 1FTG+2ATB Grind with 1-Inch Bore

For fast crosscuts on wood and plywood. Good rip cut on wood..
To be used on radial arm saws, miter saws, table saws for cutting soft/hard wood and plywood..
0.110 kerf thickness, 0.087 plate thickness, 15° Hook Angle, 1 Flat + 2/15° alternate teeth Grind..
Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
Laser-cut plate features expansion slots to reduce noise and anti-vibration design..

Check Stock

Knew Concepts 5' Woodworker Fret Saw with Screw Tension

Knew Concepts revolutionized the fret saw world with the introduction of their line of US made patented fret and coping saws. These saws are perfect for jewelers, luthiers, model builders and fine woodworkers, These saws excel when performing fine scroll saw work and when removing the waste between hand cut dovetails..
These saws are made from 1/8" thick milled aluminum with a red anodized finish..
The ultra-lightweight truss-style frame weighing just 5.1 ounces is quite rigid allowing the blade to be tensioned to a full 40 pounds minimizing blade breakage and defection and improving overall cutting accuracy.
The set of knurled blade clamps knobs securely grip the blade and prevent slippage. Blade tension is easily adjusted via a large knurled screw tension knob. Opening is 4-3/4", depth of cut is 5" and overall length is 13".
Kit includes one 15 TPI #7 fret saw blade.

Check Stock

MK Morse 2677-MKM 050326002677, stainless steel, one size

Reduce blade changes and inventory - one Morse 811 blade replaces blades from 8/12 to 18 TPI.
Reduced vibration for improved cut finish and cutting fatigue.
Available in a variety of band lengths, supporting most portable band saws, including compacts.

Check Stock

UrbanXElites Rope Saw for Trees - 53" Rope Chainsaw with 68 Sharp Teeth & 100 Feet Paracord Kit | Rope saw tree saw high limb tree rope saw, Tree Limb cutter, Rope Chainsaw | Upgraded Limb Saw Chain

A Full Fledged DIY Kit - This Rope Chain Saw kit contains 16 different items, engineered to Function & Last for Years. Everything you need for Tree Trimming. A tree limb cutter for tree limbs & a portable chainsaw, right at your fingertips..
Better Functionality & Durability - Use this Rope saw high limb cable saw to Cut both High & Low lying Branches. This Limb Saw is Sharp, and can cut 14-16 Inches in a matter of Minutes. When it comes to chainsaw on a rope, it's the way to go..
✨ A Good Investment - Why Pay Hundreds of Dolllars for a OneTime Tree Service, When all you need is a cable saw, camping chain saws for trees. Our Tree Trimming Tools is just Fraction of the Costs and can be used Multipletimes. Rope Chain Saws for Trees are a value for money.".
Cuts Both Thick & Thin Trees - This hand chain saws for tree trimming can easily tear through wood while cutting on both stroke rotations. Use this chain hand saw as a tree limb trimmer to Devour right through branches you don't need..
Ultra Strong 100 Feet Paracord - Made of 7 Inner strands, th....

Check Stock

Lackmond SG20SPL1421 SPL Series Dry Cut Diamond Blade for Cured Concrete 20-Inch by .140 by 1-Inch

Dry cut diamond blade for cutting cured concrete outside 48 hours old.
Bonded and designed for use on wall saws, air saws and low horsepower walk behind saws.
Pre and post-tensioned steel core to eliminate loss of tension and "run-out" during cutting conditions.
Delivers excellent speed of cut while maximizing longevity.

Check Stock

SUIZAN Japanese Ryoba Pull Saw 7 Inch Double Edge Hand Saw for Woodworking

JAPANESE STYLE PULL SAW: This product is a “Pull Saw.” Most people are used to European saws, called “push saws,” which cuts through a pushing motion. On the other hand, Japanese saws cut materials via pulling and are called “pull saws.” In comparison to “push saws,” this Japanese product is lighter in weight, requires less power, and results in a cleaner edge..
JAPANESE STEEL: All SUIZAN Japanese saws consist of top quality Japanese steel. The high-quality steel makes razor sharp cuts..
MADE IN JAPAN: All SUIZAN products are manufactured in Japan by Japanese master craftsmen. The whole process of making these tools are completed in one of Japan’s towns known for its craft-making tradition with a history of over 100 years..
DIVERSIFY YOUR WOODWORKING LIFE: No matter if you are a master or a beginner, using traditional Japanese-style saws gives you a brand new experience and lets you make a wider range of woodworking products, thus changing your life!.

Check Stock

Concord Blades WCB1400T120HP 14-Inch 120 Teeth TCT General Purpose Hard & Soft Wood Saw Blade

Professional quality, construction grade for ripping & crosscutiing of thick hardwoods up to 3 1/2" thick and soft woods up to 1" thick.
For use on Miter Saws, Circular Saws, Table Saws, Hand Saws and Chop Saws. RPM up to 4,000.
Ideal for cutting Hard Wood, Soft Wood, Exotic Wood and Abrasive Wood..
Thin kerf allows a smooth finish w/ minimal waste. Lower hook angle improves the surface quality of the cut, increases the feed pressure required..
3.0 mm kerf design, ATB Grind & 15Degree hook.

Check Stock

CMT 250.024.10 ITK XTreme Industrial Rip Saw Blade, 10-Inch x 24 Teeth ATB Grind with 5/8-Inch Bore

For fast rip cuts on soft/hardwood thanks to the thin kerf design..
To be used on radial arm saws, miter saws, table saws for cutting soft/hardwood. Good on plywood..
0.098 kerf thickness, 0.071 plate thickness, 20° Hook Angle, 1 Flat + 2/15° alternate teeth Grind..
Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
Laser-cut plate features expansion slots to reduce noise and anti-vibration design..

Check Stock