ReviewsPortable Table Vise

JCL Vise Jaws - Nylon, Multipurpose 6' - Use on any Metal Vise, Magnetic Reversible Pads, Clamp Flat or Round Products

  • Multipurpose Design: These 6" nylon vise jaw pads are designed for you to use either the flat or grooved side to protect and hold your workpiece from your metal bench vise. Plus, our vise jaws feature a grooved surface specifically designed to keep round or irregularly shaped items securely in place..
  • Extra Compatible: Our nylon vise pads are compatible with a wide variety of tools including vise block, drill press vise, woodworking vise, brass hammer, clamps, bench vise and mill clamps. Add it to your collection of drill press accessories..
  • Protects Delicate Surfaces: Our bench vise jaw covers are made from durable nylon which is sturdy enough to hold your workpiece in place but won’t discolor or leave any marks on their delicate surface. These nylon vise pads are ideal for woodworking, gun-smithing, jewelry making, and more..
  • 8 Strong Magnet for Easy Attachment: Each nylon vise pad set has 8 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise..
Check Stock

Sourcemall Mini Bench Vise Small Table Clamp Hobby Craft Repair Tool (Clamping Range: 0-1.2inch)

  • The mini bench vise is ideal for holding small parts in Jewelry, Hobby, Model making, Electronics, Home and Work-Bench, and etc..
  • Mini Vise body is made of Aluminum which is durable, Light weigh and it's a very portable tool..
  • This clamp is easy to use. Simply turn the bar on top to open and close the clamp onto a table surface and then turn the screw to securely clamp any small objects to work on..
  • Clamp down any wooden block for sanding, grinding, detail, drilling, carving, chiseling, and much more..
Check Stock

7' Front Vise Woodworking Bench Vise Cast Iron Front Screw Vise Woodworking Front Vise Wood Vise

  • Well Built Quality - Our Front Vise made of high quality steel, resistant to corrosion and rust, sturdy surface greatly reduces the wear rate,and durable to use..
  • Professional Design - This Front Screw Vise for quick sturdy mounting to your workbench. The 7-inch guide bar makes it easy to work and holds things more firmly..
  • Dimension - 1-3/16" diameter x 15-1/2" Length screw，3/4" diameter guide Rods and 10-1/4" width x 19-1/4" Length vise.
  • Easy to Work - Simply pull up on the handle and hold, this will cause the vise nut to disengage. Adjust the jaws to the appropriate opening and let go of the handle. A simple turn of the main handle will engage the screw and tighten the vise on the product..
  • Widely Used - Useful for woodworking, engineering and welding. Slots in base plate so you can fix the vice to a work table or machine table..
Check Stock

SWANLAKE 4.5 Inch Vise Jaw Pads Covers Protectors 1 Multi-Grooved & 1 Standard Set

  • These soft jaws for bench vise are made of Thermoplastic polyurethane rubber which is sturdy enough to hold your workpiece firmly in place and protect it from your metal bench vise..
  • Each vise pad set has 4 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise..
  • This 2 pack set with both standard & multi-groove jaw pads 4.5″ will work with a 4 inch to 5 inch bench vise..
  • This vise jaw covers feature groove sizes: 90 Degree angles: 1/16″, 1/8″, 1/4″, 3/4″. 60 Degree angle: 13/32″..
  • These vise jaws are ideal for woodworking, jewelry making, and more delicate type work..
Check Stock

Moxon Vise Hardware Kit with 2 each 8 Inch x 3/4-10 Threaded Rods (NOT Acme Threads), 2 each 4-1/2 Inch Cast Knobs, 4 each 3/4 inch Nuts and Washers and 5-3/4 x 19-1/4 Jaw Lining Leather

  • ...is an incredibly versatile workbench accessory that is simple to build with the right hardware..
  • A Moxon vise can stabilize wide and narrow boards with incredible force while various joinery, shaping or carving operations are performed. It raises the workpiece to a more comfortable and ergonomic height. It is highly portable and can be quickly mounted anywhere on a bench or table, and when not in use, easily stowed away on a shelf or hung on a wall..
  • This Moxon Vise hardware kit is quite economical, yet contains high-quality 3/4-10 threaded rods (NOT Acme threads), nuts, washers and cast knobs. This hardware kit contains everything needed (minus the wood) to make a fully functional Moxon vise..
  • This kit does not come with detailed plans or measured drawings but includes a comprehensive manual with numerous design considerations allowing you to build a custom Moxon vise that suits your personal needs..
  • This kit contains 2 each 8 inch 3/4-10 threaded rods (NOT Acme threads), 2 each 4-1/2 inch cast two-prong knobs, 4 each 3/4 inch nuts and washers and a piece of 5-3/4 inch x 19-1/4 inch jaw lining leather. For a more traditional look and feel, all metal parts are made from unfinished steel..
Check Stock

Z-COLOR Mini Flat Clamp Table Jaw Bench Clamp Mini Drill Press Vice Opening Parallel Table Vise DIY Sculpture Craft Carving Tool

  • ...igned to keep round or irregularly shaped items securely in place and a flat surface specifically designed to protect and hold delicate flat or square objects..
  • 4 Strong Magnets for East Attachment: Each vise pad set has 4 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise..
Check Stock

FRICTIONWORKS Vise Jaws. Made In USA Pro Grade SH80 Hard Non-Scratch Polymer. 4 Inch Magnetic Bench Vise Covers. N48 Magnets. Fits 3 4 5 Inch Vises and Blocks

  • ...OLD – 8 N48 spec Neodymium rare earth magnets force rated at 7 lbs each. We have tried other vice jaws and by far the strongest magnetic vise jaw pull force is with Frictionworks vise soft jaws. The only vice jaw covers with listed specs and the magnet strength you need to keep the protective jaws solidly on your table vise, jaw horse, drill press vise, swivel vise, vise clamps, or heavy duty bench vise..
  • EXCLUSIVE MAGNET RETENTION SYSTEM – The innovative internal bracket system in our soft jaws secures the magnets to the vise jaw caps with a stainless bolt and is then overmolded into the vice jaw pads, solving the biggest failure point of all soft jaw pads for metal vises leading to the toughest vise jaws made..
  • ENHANCED MATERIAL – Our proprietary fiber-reinforced polymer composite, shore hardness 80-D, provides an incredibly tough jaw face and works great and is recommended if you really want to clamp down hard. Use for gunsmithing, woodworking, jewelry working, , muzzle device installation, 80/20 Extrusions, plumbing, maching, as a golf club vise, and more. For mid-torque bench vise clamping applications see or SH60 grey medium density vise pads..
  • PROTECTIVE SURFACE – While incredibly tough, our 4″ vise soft jaws specially textured surface ....
Check Stock

Groz Portable Woodworking Vise, 6-Inch, Clamp on or Bolt to Bench, Cast Iron with \Toe-in\ Feature (39006)

  • Lightweight wood vise for the woodworker hobbyist, yet robust enough for the professional user.
  • Permanently clamp on the workbench via clamping slots or use the 2-5/32” integrated vise clamp.
  • This portable woodworking vise is manufactured from close grained cast iron.
  • Attach wooden liners to protect the vise, the work-piece and working tools.
  • Vise Jaws are equipped with a “TOE-IN” feature.
  • when fully closed, the jaws meet only at the top to provide even clamping on the whole depth of the workpiece.
Check Stock

Yost Vises LDPV-6 Drill Press Vise | 6 Inch Jaw Width Portable Vise | Blue

  • DRILL PRESS VISE: Yost Vises LDPV-6 6-inch Drill Press Vise is crafted from cast iron. Durably light-weight and portable with texture jaws..
  • TECHNICAL SPECS: Jaw Width 6” (15.24 cm), Jaw Opening 5.75" (14.605 cm), Throat Depth 1" (2.54 cm), Slot Width: 0.6" (1.52 cm), Slot centerline: 7.15" (18.16 cm)..
  • HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee..
  • SAFETY INFORMATION: Misuse of vises can cause serious injury to eyes, hands and or other body parts. Vises must be set up and used properly. Before setup and use, read, understand, and follow all ins....
Check Stock

Fashionclubs Mini Table Vice Craft Bench Vise Work Bench Clamp Swivel Vice Hobby Craft Repair Tool

  • A handy miniature Vise, ideal for holding small parts in Jewelry, Hobby, Model making, Electronics, Home and Work-Bench many more applications.
  • This mini table vise is made of a heavy duty aluminum alloy that is not only lightweight, but incredibly durable.
  • Clamp down any wooden block for sanding, grinding, detail, drilling, carving, chiseling, and much more.
  • This vise is incredibly easy to use for anyone. Simply turn the bar on top to open and close the clamp onto a table surface and then turn the screw to securely clamp any small objects to work on.
Check Stock

VEVOR Woodworking Vise, 9 Inch Woodworking Bench Vise Heavy-Duty Cast Iron Wood Working Vise, Quick Release Woodworker's Vise 10' Jaw Opening, Front Screw Vise for Woodworking, Cutting, and Drilling

  • ...to disengage. Adjust the jaws to the appropriate opening and let go of the handle. A simple turn of the main handle will engage the screw and tighten the vise on the product..
  • Simplified Installation: This wood working vise comes with pre-drilled holes in the baseplate for quick mounting to your workbench or machine table. The jaws are also pre-bored to enable the installation and attachment of custom non-marring jaw faces to secure workpiece materials..
  • Widely Applied: The woodworking front vise is suitable for home, woodworking studios, teaching equipment, and fixed for processing wood. Compact vise design ensures smooth & efficient operation, making this vise the most versatile and frequently used tool in your workshop..
Check Stock