ReviewsPorts Serial Card

BIGTREETECH TFT35 V3.0 Graphic Smart Display Controller Board for 3D Printer Ramps 1.4 RepRap 3D Printer Can Select Two Work Modes

1.Upgrade the firmware by SD card. It is easy and convenient to operate.This display board has higher compatibility. Users can select two work....
2.Serial port screen mode supports two printing modes: SD card and U disk..
3.Reserve WIFI port, and WIFI function is realized by external WIFI module.
4.Reserve the extension port of filament breaking detection (FIL-DET).
Reserve the extension port of automatic shutdown after printing (PS-ON).
5.2 sets of UART serial port extension ports are reserved for DIY use..

Check Stock

Cable Matters 2-Pack 15 Pin SATA to 4 SATA Power Splitter Cable - 18 Inches

SATA splitter cable powers up to four Serial ATA HDD, SSD, optical drives, DVD burners, and PCI-E cards from a single connection to computer power supplies.
Snug-fitting drive SATA power cable clicks into place on your power supply to provide a secure connection that prevents accidental disconnection.
Upgrade cost saver SATA power splitter cable spares the expense of upgrading an existing power supply to connect new SATA drives.
Cost-effective 2-pack provides a spare power cable for new installations or repairs.
Keep a spare in your IT toolkit or at the test bench.
DIY or pro installers both appreciate the convenience of sharing a PSU connection when installing new internal components like a DVD burner.
18 inch cable harness has 4 SATA drive receptacles spaced at 4.5 inch intervals.
Provides sufficient length for internal cable management to minimize airflow impact in most configurations.
Hdd power cables have 4-SATA 15 pin female receptacles and 1-SATA 15 pin male plug at one end.
Constructed with flexible 18 AWG conductors for reliable performance when connecting four SATA hard drives to a power supply.
Supports 3.3V, 5V, and 12V power voltages between SATA I, II, III drives and power supply connections without any degradation of performance.

Check Stock

StarTech.com 4 Port Serial Hub USB to RS232/RS485/RS422 Adapter - Industrial USB 2.0 to DB9 Serial Converter Hub - IP30 Rated - Din Rail Mountable Metal Serial Hub - 15kV ESD Protection (ICUSB234854I)

RUGGED & RELIABLE: This industrial metal USB to serial adapter hub adds 4 RS-232/422/485 ports & 1 USB 2.0 port w/ 15kV ESD surge protection (level 4), IP30 rating & locking connectors on all ports.
4 SERIAL PORTS: The ports on this USB to serial converter can be individually configured to RS232, RS422 or RS485 (2wire/4wire) at baud rates up to 921.6Kbps for devices like barcode scanners/printers.
MOUNTING OPTIONS: This metal mountable 4-port serial hub w/ 6ft (1.8 m) screw-lock USB cable incl. installs securely to a desk, wall or DIN rail using the built-in mounting ears & incl. DIN brackets.
FLEXIBLE POWER: This serial hub can be powered with either the 12V screw-locking power adapter or the 5V USB input, while each serial port (pin 9) can be set to 5V, 12V (power adapter required), or 0V.
WIDELY COMPATIBLE: To connect industrial grade equipment to any terminal, the USB to multiple DB9 male serial converter supports current and legacy Windows, Linux, macOS, as well as embedded platforms.

Check Stock

Ableconn PEX-SA134 4-Port eSATA III 6Gbps PCI Express Four Lanes Host Adapter Card - AHCI Port-Multiplier PCIe 2.0 x4 Controller Card

1.The PCE-G2S4 PCIE to 4-Ports NONE-RAID SATA III 6Gbps card will allow users add 4X SATA III ports on desktop PCs, servers, and NAS system for HDD/SSD storage expansion or boot use..
2.Based on ASMedia ASM1061SATA III (Serial ATA) advantage HCI controller and ASMedia ASM1093 SATA port multiplier. Provide 4X SATA III 6Gbps ports for PCs and Servers..
3.This model support Windows system only,install the driver before add the SSD/HDD in system...
4.Complies with Serial ATA Revision 3.0. Support SATA III speed 6Gbps, SATA II speed 3Gbps, SATA 1 speed 1.5Gbps. PCE-G2S4 was set default mode on AHCI, it also supports IDE mode or none boot mode. Users can push the mode selector on the mode they need..
5.PCIE Gen 2 X1 interface design, will works on PCIE X1, X2, X4, X8, X16 slot. Users need to check if PCs or Servers have at least one PCIE X1 slot on mother board before purchase..

Check Stock

BIGTREETECH TFT35 V3.0 Touch Screen Display RepRap Smart Controller Panel Compatible with SKR V1.3 SKR PRO Board for 3D Printer Part

❤【32 Bit High Performance Microprocessor】TFT35 V3.0 touch screen uses 32 bit ARM level Cortex-M3 series STM32F207VCT6,120MHz frequency....
❤【Two Working Modes】TFT35 V3.0 Touch screen support UART serial port screen mode(touch screen mode) and 12864 screen mode,serial screen mode....
❤【12864LCD Mode】The 12864LCD mode includes EXP1, EXP2, EXP3, where EXP1 and EXP2 are general motherboards LCD screen interface, while EXP3 is....
❤【More Extension Ports is Reserved】 TFT35 V3.0 display reserve the extension port of filament break detection ,automatic shutdown after....
❤【Firmware Update】 It is easy and convenient to update firmware by SD card,download from our github, copy and save it to SD card.firmware must....

Check Stock

DTECH 2 Port PCI-E Serial Card RS232 PCI Express Adapter COM Port Expansion for Desktop Computer PC Windows 10 8 7 XP Vista Linux Mac with 16C550 UART

2-port PCI express serial card turns a PCI-E expansion slot into 2 RS-232 DB9 serial port for your computer to connect multiple legacy serial devices.
Dual serial port card supports IRQ sharing and operates flawlessly with Windows 10, 8, 7, Vista, XP, 2000, ME, 98, Mac OS, Linux, etc.
PCI-E 1.0 a specification, Standard 16C550 UART signal.
PCI express combo card bracket with two RS232 serial interface uses WCH382 chip, high speed data communication transfer rate up to 250 Kbps.
Standard-height PCIe card bracket design allows the PCI to serial card to be installed in virtually any desktop computer case (full profile computer chassis).
An ideal serial expansion PCIe card adapter for fax modem, GSM modem, printer, barcode reader, cellular phone, PDA, POS machine, GPS, ISDN terminal adapter, satellite receiver, digital camera, hard drive, radio system, etc (If need driver installation guide , pls contact us directly via the order page.).

Check Stock

DTECH 2 Port PCI Serial Card PCI to COM Port DB9 RS232 Expansion Adapter for Desktop Computer PC Windows 10 8 7 XP Vista with 16C550 UART

2-port PCI serial card turns a PCI expansion slot into 2 RS-232 DB9 serial port for your computer to connect multiple legacy serial devices.
Dual serial port card supports IRQ sharing and operates flawlessly with Windows 10, 8, 7, Vista, XP, 2000, ME, 98,etc.
PCI 2.1 specification, Standard 16C550 UART signal.
PCI card bracket with two RS232 serial interface uses WCH chip, data communication transfer rate up to 115.2 Kbps.
Full-height bracket design allows PCI to serial card to be installed in virtually any desktop computer case (standard profile computer chassis).
An ideal RS232 serial expansion card for fax modem, GSM modem, printer, barcode reader, cellular phone, PDA, POS machine, GPS, ISDN terminal adapter, satellite receiver, digital camera, radio system, etc. (If need driver installation guide , pls contact us directly via the order page.).

Check Stock

Introduction to Desktop Publishing With Digital Graphics

【 POWERFUL PROCESSOR 】 Configured with Intel’s top of the line Core i7 series processor so you can expect very fast, reliable, and consistent performance for an exceptional PC experience..
【 ABOUT THIS PC 】Connectivity: Has 6 x USB 2.0, 4 USB 3.0, 2 x Display Ports, VGA, Serial Port, Audio Ports, Optical Drive, RJ-45 (Ethernet Port), Included Peripherals: Wired Keyboard and Mouse, USB Wi-Fi Adapter and Bluetooth..
【 ABUNDANT STORAGE AND MEMORY 】 Arrives with 16 GB Memory and 256 GB M.2 Solid State Drive for efficient multi-tasking..
【NEW NVIDA GeForce GT 1030 GRAPHICS CARD】 High-Profile Design – 4GB DDR4, 64bit, super speed memory interface. Accelerate your computers performance with this Nvidia GeForce GT 1030 4GB DDR4 Video Card. You’ll experience faster photo/video editing, smoother browsing on media-rich sites and an even more responsive Windows experience..
【MICROSOFT WINDOWS 10 LATEST RELEASE】 A brand new installation of the latest Microsoft Windows 10 Operating System, free of bloatware commonly installed from other manufacturers..

Check Stock

Genuine Dell Optiplex 980 Small Form Factor (SFF) System Motherboard Mainboard Systemboard, Compatible Part Number: C522T

...o: Integrated Intel graphics media accelerator HD, Peripheral Interfaces: Back panel -two connectors for line-in/ microphone and line-out, Front panel - two front-panel connectors for headphones and microphone, eSATA - one 7-pin connector, Network -one RJ45 connector, Parallel -one 25-pin connector (bidirectional), Serial -one 9-pin connector.
16550C-compatible, USB - Front panel - two connectors, USB - Back panel -six connectors, Video - one 15-hole VGA connector one 20-pin DisplayPort connector.
System Board Connections: one 120-pin connector PCI Express x16 data width (maximum), one 164-pin connector Express Lane, Serial ATA - three 7-pin connectors, Memory - four 240-pin connectors, Internal USB - one 10-pin connector (supports two USB ports), Processor fan - one 5-pin connector, Front I/O - one 26-pin connector, Front panel control - one 14-pin connector, Processor - one 1156-pin connector, Power 12V - one 4-pin connector, Power - one 24-pin connector, Internal serial card - one 14-pin connector, Internal speaker - one 5-pin connector, PCI Express x1 (wireless card) - one 36-pin connector, Thermal sensor - one 2-pin connector, Intruder connector - one 3-pin connector.

Check Stock

ADAPTEC - RAID Adaptec 71605 16-Ports SAS/SATA RAID Controller003cbr003eRAID 71605 SINGLE SAS/SATA PCIE003cbr003eSerial Attached SCSI (SAS) - PCI Express 3.0 x8 - Plug-in Card - RAID Supported - 0, 1, 1E, 5, 6, 10, 50, 60 RAID Level - 1 GB

PCIe x4 interface (x2 Bandwidht) to 16 ports NONE-RAID SATA III 6Gbps card will allow users add 16X SATA III ports on desktop PCs, Servers, and NAS systems for storage expansions or AHCI boot use..
Select the ASMedia ASM1064 the most stable Non-Raid PCIE 3.0 SATA controller solution. Each SATA 3.0 port will get 6Gbps max speed for AHCI boot and storage..
ASMedia PCIe product ASM2806, a low latency, low cost and low power 6 lane , maximum 4 downstream ports packet switch. With upstream PCIe Gen3x2 bandwidth,.
Supports Hot Plug and Hot Swap. Supports Native Command Queue (NCQ). Compliance Serial ATA AHCI Spec. Rev. 1.3, Serial ATA Rev. 3.0.
Supports Communication Speeds of 6.0Gbps, 3.0Gbps, and 1.5Gbps. Supports Port Multiplier.

Check Stock

Genuine Dell AMD MotherBoard Part Number: HK980 CT103 UW457 For Dell Dimension E521

Genuine Dell motherboard for Dimension E521 Case.
4 Dual Channel DIMM Support for DDR2 SDRAM.
Integrated nVidia GeForce 6150 LE Graphics Accelerator.
1 ATA-66/100/133 IDE Hard Disk Connector.
Integrated audio sound card 7.1 Surround Sound.

Check Stock