ReviewsPotentiometer Converter

10K OHM Linear Taper Rotary Potentiometer B10K Pot with Knob and 3-Pin JST-XH2.54 Connector Lead(Pack of 2)

product name：potentiometer；Type : rotary potentiometer single Linear (Type B)；model : wh148.
product size：Packaging box Total Size：96.1mm/3.78inx18mm/0.7inx173mm/6.81in.
potentiometer Total height: 24 mm / 0. 94".
Size of aluminum alloy knob: 14 x 17 mm / 0. 55" x 0. 67" (d*h).
Product material：potentiometer is made of metal and carbon film, very stable and durable,The knob is made of aluminum alloy.
Application：Widely used for volume control in audio applications, guitar, audio, Suitable for household equipment, personal audio equipment..
Product packaging:20pcs B5K B10K B20K B50K B100K Ohm （4Sets for each Value）single linear rotary taper potentiometer+20PCS Aluminum alloy knobs in three different colors+20PCS Washer+20PCS Nut.

Check Stock

TWTADE / 2pcs rv24yn20s b501 500 ohm Single Turn Rotary Carbon Linear Variable Potentiometer,Used for Inverter Speed Regulation. Motor Speed Control + 2pcs A03 knob + 2pcs dials

resistance Tolerance : +/-10 percent shaft Size : 6 x 10mm/ 0. 24" x 0. 4"(D*l).
Potentiometer Body Size : 24 x 14mm / 0. 9" x 0. 55"(D * H).
Screw Thread Dia. : 9mm / 0. 35" Shaft Diameter : 6mm / 0. 24".
Rotary Knob Size : 15 x 27mm/0. 6" x 1. 1"(H*Max. D).
Total Size : 40 x 38mm/1. 6" x 1. 5"(Dial d*h).
package content : 2 x Potentiometer + 2 x A03 knob + 2 x dials.

Check Stock

Fonte KDM-MFX9350 350W ATX Slimline Power Supply for HP ProLiant N36L N40L N54L 658553-001 630295-001 620827-001

【Volt Adjustment】 Input Voltage can be 110V or 220V. Wide adjustable output Voltage range: DC 0-48V. This supply is suitable for 5V 9V 12V 24V 30V....
【Hareware】 This Buck Converter is equipped with LED screen, heat sink and cooling fan. The LED screen can clearly display the output voltage. Heat....
【Easy Operation】 This supply is no need to install, after connecting wire, it can be used to adjust output, which is convenient. The potentiometer....
【Protection】 Over Load Protection, Over Voltage Protection, Short Circuit Protection, which can protect your device from damage. Note: the default....
【Wide Application】 This power supply has variable application. It can be used as a 5V 12V 24V 30V 36V 48V power supply for RV, Car, Labtop,....

Check Stock

Genuine Ohmite M5090C Sa-200 Sa-250 Lincoln Rheostat 64 Ohm 150 Watt

【Parameters】 -Model:Variable sliding potentiometer with knob.
【Material】 -The ceramic wirewound potentiometer is consisted of ceramic core and a resistive wire wrapped to form a toroid coil with a wiper axle..
【Features】 -The potentiometer carbon brush touches the resistance wire, and the resistance value is easy to adjust.
the rocker type manual operation, the alloy shaft, smooth and durable..
【Function】 -The rheostat is used for the regulation of voltage and current in power equipment and the middle circuit, and controls the resistance of the circuit without interrupting the current..
【Application】 -Ceramic wirewound potentiometer can be widely used as a motor speed regulator, suitable for pumps, fans and blowers or other applications that require high voltage and current..

Check Stock

TWTADE / 2pcs rv24yn20s b502 5k ohm Single Turn Rotary Carbon Linear Variable Potentiometer,Used for Inverter Speed Regulation. Motor Speed Control + 2pcs A03 knob + 2pcs dials

Special attention：If there is any quality problem with the product you received, which causes it to fail to work normally, you must send an email to us immediately, and we will solve the quality problem for you.Product name : potentiometer.
resistance Tolerance : +/-10 percent shaft Size : 6 x 10mm/ 0. 24" x 0. 4"(D*l).
Potentiometer Body Size : 24 x 14mm / 0. 9" x 0. 55"(D * H).
Screw Thread Dia. : 9mm / 0. 35" Shaft Diameter : 6mm / 0. 24".
Rotary Knob Size : 15 x 27mm/0. 6" x 1. 1"(H*Max. D).
Total Size : 40 x 38mm/1. 6" x 1. 5"(Dial d*h).
package content : 2 x Potentiometer + 2 x A03 knob + 2 x dials.

Check Stock

ATNSINC 4Pack LM2596 DC-DC Buck Converter, Adjustable Step Down Voltage Regulator 3-40V to 1.5-35V High Efficiency Power Supply Volt Reducer Transformer Module

The input voltage: DC 3 -40 V (Input voltage must be 1.5 V higher than the output voltage, no boost.).
The output voltage: DC 1.5 - 35 V adjustable..
The output current: It is recommended to use under 2A, maximum 3A(Additional heatsink is required)..
Steps: 1. Plugged into a power supply (3-40v), the power indicator light is lit, the module to work properly. 2. Adjust the blue potentiometer knob (generally booster clockwise, counterclockwise step-down) with a multimeter monitoring the output voltage to the voltage..
Package includes:4XLM2596 DC-DC buck converter module（Note：The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down).

Check Stock

SMKAN DP20V2A Constant Voltage Constant Current Programmable Control Step-down Supply Power Module

...ltage or current required. LCD display on the model has the function digital voltmeter and ammeter. You can view the preset voltage, input voltage, output voltage, the preset current, output current, output power and LCD brightness..
Adjusting preset voltage:Pressing SET button, page down to U-SET, press the codding potentiometer, then enter toadjustnumeric value. Press codding potentiometer in turn to choose the numeric value you want to adjust. Turn codding potentiometer to adjust the numeric value. If you want toexit adjusting voltage, press shortly SET. In the process of adjusting preset voltage, if you open output voltage mode by pressing the ON/OFF, the output voltage will be refreshing by increasing or decreasing the numeric value.
ifyou close output voltage mode by pressing the ON/OFF, the output voltage will not be refreshing by increasing or decreasing the numeric value..
Adjusting preset current:Pressing SET button, page down to I-SET, press the codding potentiometer, then enter toadjustnumeric value. Press codding potentiometer in turn to choose the numeric value you want to adjust. Turn codding potentiometer to adjust the numeric value. If you want toexit adjusting current, press shortly SET..
Power-down storage:If you want to use the prese....

Check Stock

Taiss 60PCS Potentiometer Kit B5K 10K 20K 50K 100K Ohm Linear Taper Rotary Audio B Type Potentiometer with Nuts, Washers and 3 Different Colors of Aluminum Alloy knobs F029

Absolute good quality:Single linear rotary taper poteniometer, 3 terminals, single linear, with standard WH148 knob.
Linear Potentiometer: potentiometer b1k b5k b10K b20K b50K b100K, with match nuts, washers.
Rotary potentiometer with knob: come with black-white plastic Potentiometer knob, Size: 0.67 inch*0.59mm (H*W).
Type and Material:single linear, metal and carbon film.

Check Stock

OCR 1K-1M ohm Potentiometer Kit, 45 Sets Single Linear Potentiometer with Knobs, Nuts and Washers,9 Values 1K 5K 10K 20K 50K 100K 250K 500K 1M 3 Terminal Rotary Potentiometer

★Top adjustment type and knurled shaft single linear 3 terminal 9 values 1K 5K 10K 20K 50K 100K 250K 500K 1M rotary potentiometer..
★Single linear knurled shaft potentiometer. Shaft diameter:6mm, shaft length:17mm.
Mounting thread diameter:7mm, base size:16*7mm..
★Top adjustment type and knurled shaft for easy operate in daily use time..
★Taper potentiometer used for volume control of audio sets, car radios, amplifiers, mixers, synthesizers and other appliances. For electronic circuit projects that need adjustable voltage dividers, and for tuning and calibration..
★All the potentiometer are packed in a durable plastic box with compartments that keeps small parts organized..

Check Stock

Hilitchi 120-Pcs [100 to 500K] ohm 3296W Multiturn Trimmer Potentiometer Assortment Kit - [12 Value]

knob Size: 14 x 17 mm / 0. 55" x 0. 67" (d*h).
material: metal, electronic parts, carbon film.
package: 5 x Potentiometer 5 x knobs some x nut parts.

Check Stock

Potentiometer Kit, 1K ohm-100K ohm Multiturn Trimmer Potentiometer 3296W, 5K 10K 20K 50K 100K Ohm Single Linear Taper 3 Pins Rotary Potentiometers Resistor with Pots Knobs Kit

【GOOD QUALITY:】These Potentiometer made of good selection of metal and carbon film, reasonable noise and wear characteristics. Functioning as a variable voltage divider, these pots are with standard knobs. built well and good style and functionality, all worked within tolerances.
【MULTIPLE MODELS:】The Potentiometer Kit Value Include linear potentiometer 5K 10K 20K 50K 100K, 5pcs of each value, and 3296W Multiturn Trimmer Potentiometers 1k 5k 10k 50k 100k, 1Pcs of each value.
Nice little kit of potentiometers, it comes with a selection of different ohm pots. What’s more, it also has the nuts, washers, nuts and knobs.
【SPECIFICATIONS:】Single linear, type B, these rotary taper poteniometer values are marked with a readable string indicating the total resistance for easy recognition. They are manually adjustable variable resistor with 3 terminals.
【MULTIPLE APPLICATION:】These Potentiometers suitable for volume control in audio applications, guitar, amplifier, audio, lamp, other dudio equipment arduino based projects and so on. Handy kit to fix knobs on amplifier or other electrical appliances, all pots are fully functional and have smooth operation.
【PERFECT PACK:】Potentiometer assortment packaging was Perfect, All packaged in plastic b....

Check Stock