ReviewsPower Amplifier 500watt Stereos

SCOSCHE SLC4 Car Stereo Speaker 4-Channel Audio Lineout Converter/OEM Amplifier Adapter with Adjustable Level Controls

  • ADD SUBWOOFERS: Works with high power car stereos (up to 80 watts per channel) to add subwoofer bass systems to any car stereo..
  • EASY TO INSTALL: Provides amplifier remote turn on output without removing car stereo..
  • OUTPUT CONVERSION: Line out converter for car stereo speaker wire outputs to RCA Cable outputs..
  • ADDITIONAL CHANNEL: Allows the addition of 2 or 4-channel amplifiers to factory or aftermarket stereos..
  • BUY WITH CONFIDENCE: Backed by Scosche’s Lifetime Tech Support and Limited Lifetime Warranty..
Check Stock

Monolith M-12 V2 12in THX Certified Ultra 500 Watt Powered Subwoofer, Massive Output, Low Distortion, Vented HDF Cabinet

  • ... was developed from the ground up, with a design focus on achieving output, accuracy, dynamics, and linearity, while minimizing distortion. Enclosed in a cabinet made from HDF material, massive internal bracing, and outfitted with two ports that can utilize foam plugs to run the subwoofer in a sealed mode..
  • 500 Watt Amplifier: The 500W RMS amplifier is built around a Texas Instruments 48‑bit data path (with 28‑bit filter coefficients) and DSP engine. Each amplifier's transfer function, power output limiting, and thermal protection are monitored to the millisecond and are customized for each individual driver. The high efficiency Class D amplifier modules are based on a proven topology that has been continuously refined over the past 4 years. The amplifier has vast reserves of power for highly.
  • Cabinet and Internal Bracing: HDF (High Density Fiberboard), not MDF, was utilized resulting in a sonically inert cabinet. Internal bracing has been strategically placed to increase overall cabinet strength and limit unwanted panel vibrations that would cause discoloration and distortion. The strong cabinet and bracing combine to ensure you hear massive amounts of bass, not cabinet resonances..
  • All Amp'd Up: The Monolith subwoofer amplifier has an extraordinar....
Check Stock

Monolith M-10 V2 10in THX Certified Select 500 Watt Powered Subwoofer, Massive Output, Low Distortion, Vented HDF Cabinet

  • ...developed from the ground up, with a design focus on achieving output, accuracy, dynamics, and linearity, while minimizing distortion. Enclosed in a cabinet made from HDF material, massive internal bracing, and outfitted with a single port that can utilize a foam plug to run the subwoofer in a sealed mode..
  • 500 Watt Amplifier: The 500W RMS amplifier is built around a Texas Instruments 48‑bit data path (with 28‑bit filter coefficients) and DSP engine. Each amplifier's transfer function, power output limiting, and thermal protection are monitored to the millisecond and are customized for each individual driver. The high efficiency Class D amplifier modules are based on a proven topology that has been continuously refined over the past 4 years. The amplifier has vast reserves of power for highly.
  • Cabinet and Internal Bracing: HDF (High Density Fiberboard), not MDF, was utilized resulting in a sonically inert cabinet. Internal bracing has been strategically placed to increase overall cabinet strength and limit unwanted panel vibrations that would cause discoloration and distortion. The strong cabinet and bracing combine to ensure you hear massive amounts of bass, not cabinet resonances..
  • All Amp'd Up: The Monolith subwoofer amplifier has an extraordinar....
Check Stock

Rockville RG212CA Dual 12 inches Slim Vented Powered Car Subwoofer Enclosure 2000 Watt

  • Features of RG212CA v2: Rockville RG212CA v2 Dual 12" Slim Vented Powered Car Subwoofer Enclosure, Complete all in one system includes built in amplifier, top quality enclosure, and dual 12” subs, Vinyl finished enclosure with side vents tuned to 40Hz, Enclosure is built with ¾” MDF and is ribbed and braced, 2000 Watts Peak power output, 500 Watts RMS, 12“ Super-Slim Subwoofer, Ultra-Stiff Composite Pulp Cone with Kevlar Reinforcement, 3D Molded Acrylic Dust Cap, Expanded & Rolled Steal Basket.
  • High Density Laminated Rubber Surround, High Power Strontium Magnet with Ultra Saturated High BL Motor Structure, Vented Core Magnet Motor Structure, 2” High Temperature Aluminum Voice Coil, 8 mm Washer & Yoke Plates, 13.6 mm Peak-to-Peak X-Max, 40 oz. Magnet, Slim Vented MDF Enclosure Design, Impedance: 4-ohms, Frequency response: 30Hz-500Hz, SPL @ 1w/1m: 89dB, Dimensions: 29.52" Length x 15" Height 4.37" Top Depth x 6.65" Bottom depth, Unit Weight: 40.12 Lbs.
  • Amp Features: Built-in 500 Watts RMS / 2000 Watt Mono Block Amplifier, 2 Ohm stable amplifier, Class D amplifier, Extruded aluminum heatsink stays cool even at high volumes, 200mV – 5V Variable Input Level.
  • 12dB Low Pass Crossover Frequency 50Hz-200Hz, Low Level RCA Inputs, Remote level attenuat....
Check Stock

(2) Rockville SBG1188 18' 2000W Pro DJ Subwoofers+RPA12 5000w Amplifier+Cables

  • Package Includes: (2) RockvilIe SBG1188 18" Passive Pro DJ Subwoofers Totaling 2000 Watt. (1)RockvilIe RPA12 5000 Watt Peak / 1400w RMS 2 Channel Power Amplifier Pro/DJ Amp. (2) Rockvile RCSS1425 25' 14 AWG Speakon to Speakon Speaker Cables. RockvilIe SBG1188 18" 1000 Watt Passive Pro DJ Subwoofer w/ MDF Cabinet and Pole Mountable. 18 Pro audio woofer. 500 Watts RMS. 750 Watts Program Power Handling. 1000 Watts Peak Power Handling. 3 High temperature aluminum voice coil.
  • 90 oz woofer magnet. Dual Ported Enclosure for Improved Bass Response. Construction: High-Density, High-Quality Non Resonant Particleboard, Stapled, Bonded & Braced. Ergonomic Recessed Handles. Molded Steel Grill. Aviation Grade Black Carpet. Pole Mount. Rubber Isolating Feet. Binding Post / Banana Plug Terminals (Negative/Positive). 1/4 Jack (In/Out). SpeakON (In/Out). All input/output connections are internally connected in parallel. Nominal Impedance: 8 Ohm. Sensitivity: 96dB @ 1w/1m.
  • Frequency Response: 20Hz - 500Hz. Dimensions (W x D x H): 23 x 18 x 26. Weight: 53 lbs. RMS Power Output: Stereo 8 Ohm: 2 x 500W. Stereo 4 Ohm: 2 x 700W. Bridged 8 Ohm: 1 x 1400W. Peak Power Output: Stereo 8 Ohm: 2 x 2000W Max. Stereo 4 Ohm: 2 x 2500W Max. Bridged 8 Ohm: 1 x 5000W Max. Terminals: Input....
Check Stock

SOUNDSTREAM AR1.8000D ARACHNID Series 8000w Mono Amplifier 1-Ohm Class D

  • SOUNDSTREAM AR1.8000D ARACHNID Series 8000 Watt 1-Ohm Mono Amplifier.
  • SOUNDSTREAM AR1.8000D ARACHNID Series 8000 Watt Mono Amplifier 1-Ohm Class D Amp . 1-ohm Stable Monoblock Operation for MAX Power. Bridge 2 Monoblocks Together for Double Power!. Military Grade PCB w/ PWM MOSFET Power Supply. Direct Short, Thermal, & Overload Circuit Protection. High/Speaker Level & Low Level/RCA Input. 200mV-6V Low Level RCA Input. Pre-Amp Low-Level RCA Outputs (Select Models)..
  • 4g Power Wire & 8g Speaker Wire Outputs. Variable 12dB High & Low Pass Crossovers. 12dB Bass Boost Increases Low Octave Harmonics. 1800 Phase Shift Improves Low Octave Dynamics. Dash Mount Remote Control Included. Specifications:. Max Power (Watts): 8,000. RMS Power @ 4Ω: 1,500 x 1. RMS Power @ 2Ω: 2,500 x 1. RMS Power @ 1Ω: 4,000 x 1. Remote Gain Control: Included. Low Pass Filter: 40-180Hz. Bass Boost: 0-13dB..
Check Stock

ALPINE SWT-S10 1200w 10" Car Subwoofer in Bass Tube Enclosure+Amplifier+Amp Kit

  • Package Includes: (1) Alpine SWT-S10 1200w 10" Car Audio Subwoofer in Bass Tube Enclosure 4-Ohm Sub. (1) RockvilIe RXA-T1 1500 Watt Peak/750w RMS 2 Channel Amplifier Car Stereo Amp. (1)RockvilIe RWK81 8 Gauge Complete Amp Installation Wire Kit with 100 % Copper RCA. ALPINE SWT-S10 1200w 10" Car Audio Subwoofer in Bass Tube Enclosure 4-Ohm Sub. Subwoofer Type: 10 (25CM) BASS REFLEX SUBWOOFER TUBE. Frequency response: 35 - 200 Hz. Power handling: 1200 Watts peak power and 250 Watts RMS power.
  • Design: Stitched Alpine Logo, Rubber surround and push-type insert terminals. Dimensions: 11.22" x 23.62". Enclosure Dimensions: 11.25"W x 23.65" D. RockvilIe RXA-T1 1500 Watt Peak/750w RMS 2 ChannelCar StereoAmplifier. CEA Compliant Power Ratings: 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD 1 x 370 Watts bridged @ 4 Ohms < 1% THD. 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N. 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD.
  • 1 x 370 Watts bridged @ 4 Ohms < 1% THD. RMS Power Ratings 750 Watts (2 x 375 Watts RMS) @ 2 ohms 1 x 750 Watts @ 4 ohm Bridged Mono 500 Watts (2 x 250 Watts RMS @ 4 ....
Check Stock

Klipsch RSA-500 500W Multiple Use In-Wall Subwoofer Amplifier (Each)

  • The Klipsch RSA-500 is a single channel amplifier designed to power a passive subwoofer (a subwoofer that has no internal amplifier).
  • Primarily designed for use with the Klipsch RW-5802 and RW-5101-C in wall subwoofers, it also features custom settings for the AW-800-SW outdoor subwoofer.
  • This amplifier pumps out 300 watts into an 8-ohm load (one subwoofer module) and 500 watts into a 4-ohm load (two subwoofer modules).
  • The RSA-500 offers standard input/output connectivity that will support any type of system.
  • Rack ears are included for fast and secure placement into any standard 19-inch rack.
Check Stock

Rockville MS10LW 10" 2400w White Marine/Boat 10" LED Free Air Subwoofer Bundle with Rockville DBM12 2000w Mono Amplifier w/Covers+Bass Remote & Rockville RMWK4 Amplifier Install Wire Kit (3 Items)

  • Package Includes: (1)RockvilIe MS10LW 10" 2400 Watt White Marine/Boat 10" Free Air Subwoofer with LED. (1) RockvilIe DBM12 2000w 2 Ohm Marine/Boat Mono Amplifier Amp w/Covers+Bass Remote. (1)RockvilIe RMWK8 8 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit. Features: RockvilIe MS10LW 10" Marine Free Air Subwoofer with LED (White). Free air subwoofer does not require any enclosure. Max Power: 2400 Watts. RMS Program Power: 1200 Watts. RMS Power: 600 Watts.
  • Polypropylene cone with Rubber edge. 2.0" 4 Layer dual voice coil. Molded ABS plastic basket made with a special blend that is waterproof and un-breakable (if you literally jump on it, it will not break or bend). Magnet 80 Oz double stacked magnet. Frequency response: 30Hz-4Khz. Impedance: Dual 4 ohms. Sensitivity: 90dB. Total diameter: 10.55". Cutout diameter: 9.0". Mounting depth: 5.6". Specifications: Free Air Resonance (Fs): 31.05 Hz. Electrical Q (Qes): 0.5577.
  • Mechanical Q (Qms): 2.3313. Total Speaker Q (Qts): 0.45. Equivalent Compliance (Vas): 1.676 cu ft / 47.4728 L. One-Way Linear Excursion (Xmax): 0.41 in / 10.5 mm. Reference Efficiency (No): 0.25%. Efficiency....
Check Stock

CT Sounds AT-500.1D 700 Watt Class D Competition Mono Amplifier Car Audio

  • Mono amplifier with 500 watts RMS power at 1-ohm load (12.8v).
  • Frequency response: 10Hz to 250Hz (Bass Knob Included).
  • Equipped with 4-way protection circuitry along with a Diode 6A60 for reverse polarity protection.
  • sleep easy at night knowing your car audio amplifier is protected.
  • Built using an advanced PCB board featuring Korean capacitors, high quality transformers and cutting-edge inductors to ensure this car amplifier class d delivers the power you need to destroy the competition in the SPL lanes.
  • Internal wiring features 8AWG OFC cables for enhanced electric current allowing this car amplifier monoblock to deliver louder, cleaner, and more punchy power than other car mono amplifiers in its class.
  • Heavy duty heat sink design, high power MOSFET switching technology, and silicon utilized throughout the internal components will ensure the class d amplifier car audio runs cool for even the most demanding playlists.
Check Stock

Pyramid PB715X 1000 Watt MOSFET 2-Channel Car Audio Power Amplifier System with Soundstorm 8 Gauge Complete Car Audio RCA Wiring Installation Kit

  • PACKAGE INCLUDES: 1 Pyramid PB715X 1000 watt MOSFET 2-channel car audio power amplifier system and 1 Soundstorm 8 gauge complete car audio RCA wiring installation kit.
  • AMPLIFIER: The amplifier features a MAX power handling of 1000 watts and a RMS power handling of 500 watts at 4 Ohms. The MOSFET modulated power supply has a higher switching speed and includes a built in variable subwoofer crossover and variable gain control.
  • WIRING KIT: The amplifier installation wiring kit features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect.
  • DIMENSIONS: Dimensions: 7.28’ L x 9.45’ W x 2.09’ H.
  • WARRANTY: The amplifier and the wiring kit both include a 1 year manufacturer warranty.
Check Stock