ReviewsPower Brake Booster Hose

Tektro HD-e350 eBike Hydraulic Disc Brake with 2Pcs 160/180mm Rotor

【Electric Induction Control System】With power cut-off sensor, when braking, the signal is sent to the electronic control system to power off the motor. Cable length 190mm. Please pay attention to check whether the segment of the wiring port matches..
right rear 1850mm. This hydraulic disc brake is only suitable for ebikes. 【Oil】Non-corrosive environmentally friendly mineral oil..
【Caliper】 Forged aluminum body. Open system, 2 piston. Weight Front: 302g / Rear: 322g. 【Brake Lever】:Cast aluminum lever & bracket. Two-pieces clamp. 3 finger blade..
【Rotor】Diameter 180mm. Thickness 1.8mm. Weight 150g each. Lightweight polygonal guide design. High heat dissipation and heat resistance. 【Pads】High-performance metal-ceramic composites, low noise resin pad..
Note: the rear calipers and lever came in separate pieces so you can route internally. The brake hose were already filled with brake fluid, so you need to be careful not to spill the brake fluid when you install it..

Check Stock

F-AL-3/8, 3/8″ Threaded Female Tank Filter for Mosquito Misting Systems

{Made in USA Pump & Tubing} Mid Pressure Patio Misting Kit complete with 200PSI Booster Pump, Cleanable Brass/Stainless Steel Misting Nozzles, UV treated flexible tubing, and push lock fittings. Easy to install..
{Pump Specifications} 110 Volt Kit Includes: – 200PSI Booster Pump with Plug (110v) – 50ft Flexible Tubing – Calcium Inhibitor Filter – 12 Brass/Stainless Steel Mist Orifice Nozzles – 0.012” – 11 – Push Lock Mist Tees – 1 – Push Lock End Mist Elbow – 6ft Feed line with 3/4 Garden hose connector – Plastic Clamps.
{Installation} – Push Lock Fittings – Easy Connect -Whisper Quiet Operation Easy to hook with any garden hose Max Water pressure 200 PSI Supports up to 20 Nozzles Wall Mountable Plugs in to standard 115V outlet (wall plug included on 110v models only).
{Comes with Filter to protect your Nozzles} Booster Pump Features: Built-In Thermal Safety Switch Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4” Garden Hose Connecter Outlet Fitting: 1/4” and/or 3/8” Push Lock.
{Easy to Expand} Booster Pump Features: Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4” Garden Hose Connecter Outlet Fitting: 1/4” and/o....

Check Stock

YiaChuii 15ft 3 in 1 ABS & Power Air Line Hose with Glad Hands & Gladhand Handles for Tractor Trailer Semi Truck

...LER CABLE for ABS SAE J2394 - 4/12-2/10-1/8 -65°C/-85°F (Green)] - [AIR BRAKE SAE J1402 A DOT TYPE S 3/8 I.D. (Black)] - [SAE J560 for Plug].
1 Pair Glad Hands & Glad Hand Extension Handles.
【CROSS REFERENCE NUMBERS】3 in 1 Semi Truck Power Cable: 302171,30-2171,11-8115.
PE13050. Glad Hands: 035042 / 035045, 1011EF / 1011SF, 278850 / 278851, etc. Gladhand Grips: 12-600, etc..
【7 WAY ELECTRICAL CABLE】Our power cord uses the industry standard zinc die-cast plug to efficiently transmit power from the engine to your trailer/truck. The real high-quality copper makes the cable have good thermal conductivity and electrical conductivity. The durable electrical cable ensures the normal use of lights such as turn signals and brake lights during driving..
【ERGONOMIC RUBBER GRIP HANDLES】At the ends of the two 3/8" ID rubber air brake line hoses are two 1/2" swivel fittings and color-coded handles. The red - blue handles, large and easy-grip, are suitable for installing sladhands and for easily attaching/detaching gladhands and hose sup....

Check Stock

1967-72 Chevy Truck 11 in Power Brake Booster Conv Kit OE

This kit is as close to OEM as it gets with a single bail master cylinder and 11" booster for massive stopping power.
For use with disc front and drum rear brakes which complements a front disc brake conversion perfectly.
The included mounting bracket is powder coated black and makes it a bolt on installation for 1967 to 1972 Chevy and GMC trucks.
A non-adjustable proportioning valve, mounting bracket, and factory bent inlet lines make for a clean, quick, and professional installation.
Dual 3/8"-24 IFF outlets for the front brakes and a single 9/16"-18 IFF outlet for the rear brakes allow for simple brake line connections.

Check Stock

Residential Misting System- Made in USA Pump- 200 psi Mid Pressure Patio Misting System-12 Nozzles Misting System

{Made in USA Pump & Tubing} Mid Pressure Patio Misting Kit complete with 200PSI Booster Pump, Cleanable Brass/Stainless Steel Misting Nozzles, UV treated flexible tubing, and push lock fittings. Easy to install..
{Pump Specifications} 110 Volt Kit Includes: - 200PSI Booster Pump with Plug (110v) - 50ft Flexible Tubing – Calcium Inhibitor Filter - 12 Brass/Stainless Steel Mist Orifice Nozzles - 0.012'' - 11 - Push Lock Mist Tees - 1 - Push Lock End Mist Elbow - 6ft Feed line with 3/4 Garden hose connector - Plastic Clamps.
{Installation} - Push Lock Fittings - Easy Connect -Whisper Quiet Operation Easy to hook with any garden hose Max Water pressure 200 PSI Supports up to 20 Nozzles Wall Mountable Plugs in to standard 115V outlet (wall plug included on 110v models only).
{Comes with Filter to protect your Nozzles} Booster Pump Features: Built-In Thermal Safety Switch Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4'' Garden Hose Connecter Outlet Fitting: 1/4'' and/or 3/8'' Push Lock.
{Easy to Expand} Booster Pump Features: Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4'' Garden Hose Connecter Outlet Fitting: 1/4'' and/or 3/8'' Push Lock. MC12020.

Check Stock

SHIMANO Deore SM-BH90 Cuttable Hose - Black Front

Premium replacement resin coated hydraulic brake hose.
Stiff reinforced hose that performs under pressure, keeping your brakes sharp.
2.1 mm bore diameter for excellent brake performance and response.

Check Stock

Raybestos BH380406 Professional Grade Hydraulic Brake Hose

Raybestos Brake Hose is designed to transfer the brake fluid from the master cylinder to the slave cylinder for braking.
This hose meets federal standards to ensure performance and safety, while providing longer hose life.
It utilizes premium fittings to ensure a good hydraulic seal.
Designed to transfer the brake fluid from the master cylinder to the slave cylinder for braking.

Check Stock

Raybestos BH381116 Professional Grade Hydraulic Brake Hose

Raybestos Brake Hose is designed to transfer the brake fluid from the master cylinder to the slave cylinder for braking.
This hose meets federal standards to ensure performance and safety, while providing longer hose life.
It utilizes premium fittings to ensure a good hydraulic seal.
Designed to transfer the brake fluid from the master cylinder to the slave cylinder for braking.

Check Stock

Dialed: The secret math of a perfect mountain bike setup

[Great Valve Package] In this package, you will get 4pcs brake lever covers and 4pcs compression nuts, 6pcs protective sleeves, 4pcs oliver and 4pcs inserts, 1 roll 2500mm bicycle hydraulic disc brake hose, 1pc bicycle hydraulic hose fitting insert tool and 1pc hydraulic hose cutter, total 25pcs. Complete kit can fully meet your needs, which is ideal for Shimano BH59 System, you don’t need to find and buy other accessories, saving your time and money..
[Reliable Material] Brake hose is made of high-quality material and nylon coating, which is durable and stable. 2500mm length pipes can be cut according to your needs. Precision made with fine workmanship, high temperature and low temperature resistance, high blasting coefficient and enough safe. Needle driver insertion tool is made of aluminum alloy CNC process, it feels good and durable..
[Hose Fitting Insert Tool] It is easy to use, super utility needle driver insertion tool. Attached hydraulic hose cutter, sharp and achieve precise and smooth cutting, clean and no burrs. Quick change adapter design, it can match with all needle driver olive and barb on the market, making maintenance easier..
[How to Use] You can install hose fitting cleanly and gently. First, put the olive into the oil pipe, seco....

Check Stock

NEW 2\ DROP SUSPENSION & WILWOOD BRAKE SET, SPINDLES, CURRIE REAR END & AXLES, POSI, 11\ DRILLED DISCS, BLACK CALIPERS, MASTER, BOOSTER, ARMS, 1968 1969 1970 1971 1972 CHEVELLE EL CAMINO CUTLASS GTO

...th Hats 003e Low-Profile Dynapro 4 Piston Calipers - Black 003e Drum Parking Brake Assemblies with Caliper Mounting Brackets 003e Bearing Retainers 003e BP-10 Brake Pads 003e All hardware to install.
Front and Rear Flexline Kits | Rear Hard Line Kit | Rear Parking Brake Cable Kit | Southwest Speed Chrome Power Brake Booster (SWS Part # 300-7975) | Wilwood Polished Master Cylinder and Proportioning Valve Set (Part # 261-13270-P) 003e Polished Tandem Chamber Master Cylinder 003e 1 1/8" Bore cylinder 003e Stainless Steel Fluid Tubes 003e Mounting Bracket 003e Stainless Steel Button Head Bolts | Southwest Speed Tubular Upper and Lower Control Arms (SWS Part # 101-9172 Upper and # 101-9374 Lower).

Check Stock

Sunsong 2203199 Brake Hydraulic Hose

Each brake hose is precision engineered to exact fit and includes brackets, grommets, molded plastic guards, wire clips, and protective sleeves as required for to ensure that all wearable parts are restored to original condition.
Brake hoses exceed DOT, Federal Vehicle Safety Standards (FMVSS 106) and SAE J1401 standards with a burst pressure rating of 8,700 psi, and a tensile strength of 560 lb. Durability test (Whip test) results exceed original equipment requirements by 300%.
All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime.
Every brake hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose.
Brake hoses with banjo end fittings include new copper washers to ensure proper sealing.

Check Stock