ReviewsPower Busbar

100W 12V Solar Panel Kits, 100 Watt 12 Volt Monocrystalline Solar Panels 9BB with Intelligent MPPT Charge Controller + Extension Cables for 12 Volt RV Trailer Marine Boat Home Off Grid System

  • [ High-level 9BB Solar Cell ] 9 busbar solar cell design. More busbar, More power. 9BB solar cell can increase the cell receiving surface and the thinner ribbon can reduce the covered area , allowing the 100w solar battery charger a highest conversion rate up to 21.9% than traditional 5BB solar cell, making the 100 watt solar panels to work more efficiently..
  • [ MPPT Charge Controller ] The included intellgent mppt charge controller enables the 100 watt solar panels to charge multiple 12 volt batteries, like AGM, Gel, Flooded, Sealed, Lead-acid and Lithium battery. Advanced MPPT tech allows it to captures as high as 15%-30% performance than PMW charge controller. And it is powered directly by sunlight, so it has no self consumption and won't drain your battery. Visual LCD display helps to monitor the working conditions of the solar panel and battery..
  • [ Full Protections ] The 10amp mppt solar controller is built in full protections to safeguard your battery from over-charge, over-discharge, over-current, over-volatge, over-load, short circuit and more, to maximually avoids the damage due to system fault or installation error. Featuring with smart 3 stage charging to ensure your battery is efficiently and safely charged to 100%..
Check Stock

Circuit Breaker Buss Bar Combing Terminal Block Pure Copper PVC for Schools Hospitals Hotels Home(6 way)

  • Applicable Circuit Breaker: The single row bus bar can be connected to C45 type, DZ47 type, IC65N type and other small circuit breaker air switches..
  • PVC Shell: The dustproof shell protects the internal aging, makes the busbar have a longer life, and has the characteristics of insulation, high temperature resistance, and not easy to break..
  • Wear Resistance: The precise production for durable use, will not cause serious wear and tear due to too many installations, and can no longer be re‑installed..
  • High Quality Material: Made of pure copper, with the features of high current carrying capacity, good conductivity, large overcurrent, convenient wiring and not easy to oxidize..
  • Wide Application: The busbar can be widely used in circuit breakers in enterprises, construction sites, schools, hospitals, hotels, homes and other places..
Check Stock

GOUNENGNAIL-.157\ x 2.36\ x 7.87\ Copper Ground Bar Kit, with 5/16''x10 Terminal Positions,Copper Grounding Busbar Bar Kit

  • Copper ground bar . Made of high conductivity copper to inhibit corrosion.Insulator material: Made from UL recognized resin material and meets the Requirements of UL 94 VO for Self-Extinguishing Materials..
  • Wall mounted copper ground bar kit enables multiple ground points to be connected quickly and easily..
  • Comes pre-assembled with brackets and insulators attached for quick installation.
  • This is a copper ground bar set, including one copper plate, two polyester standoff Insulators, two stainless steel brackets, 5/16'',10 stainless steel terminal positions. ..
  • Widely used in high low power distribution cabinet.For power distribution, transmission, fixing copperor copper busbar, etc, play the role of minsulation and connection..
Check Stock

Wall Mounted Copper Ground Bar 16 Terminal Positions .25\ x 2\ x 10\ Ground Bus Bar Kit,SM40 Insulators Rated Uimp

  • .25" (1/4") x 2" x 10" Copper Ground Bar with 1/4''* 16 Terminal Positions..
  • This is a high conductive copper ground bar set, including one copper plate, two SM40 polyester standoff Insulators, two stainless steel brackets, 16 sets stainless steel washer& bolts ..
  • SM40 polyesters made from UL material - QMFZ2.E252110,Rated Uimp up to 6kV ..
  • Wall mounted copper ground bar kit enables multiple ground points to be connected quickly and easily. Comes pre-assembled with brackets and insulators attached for quick installation. Widely used in high low power distribution cabinet,equipment grounding connections,For power distribution, transmission, fixing copper or copper busbar, etc..
  • 100% after-sales guarantee. If you have any problems within 30 days of receiving the goods, you can enjoy the unconditional return refund service..
Check Stock

12 Terminals Bus Bar Ampper 5.3 Nickle Plated Brass Power Distribution Block Battery BusBar Junction for Car Vehicle Rv Truck Marine Boat Audio Amplifier and More Red

  • Heavy Duty: nickle plated brass thick busbar, base is made of heavy ABS material, mechanically strong, insulated, heat resistant and flame resistant, durable made for safety use..
  • Customized Design: 12 stainless M4 terminal screws, 1 x 1/4" (M6) terminal stud & nut for easy installation and route your wires with minimal effort..
  • Operation: Max operating voltage 48V DC / 300V AC, Max continuous amperage: 150A AC / 200A DC..
  • Compatible: widely used for car, vehicle, Rv, truck, marine and boat, audio, amplifier, video, also electrical equipment / appliances..
  • Package Includes: 1 pcs 12 terminals 5.3" power distribution brass battery junction block bus bar and cover..
Check Stock

200 Watt Solar Panel Ultra-Thin 400W 2X 200W 12V PET Flexible Solar Panel Suitable for Family, Rv, Caravan, Boat{2*200w}

  • High conversion rate: High-efficiency monocrystalline silicon solar cells are used, and the power generation efficiency is about 1.2 times that of conventional polycrystalline silicon, and the overall area is smaller under the same power..
  • Thin and flexible: Using the latest component packaging technology, it is thinner, lighter, softer, and has a longer life. Up to 8-10 years.
  • Specially designed for harsh environments: solar panels can work normally in different weather environments, waterproof, high temperature and weather resistant. The circuit also uses overcharge and reverse current protection design to ensure the safety of the use process..
  • Durable and reliable: Using PET, EVA, TPT, multi-busbar PERC solar cells, after high temperature lamination process, glue-sealed junction box and IP67 waterproof photovoltaic connectors, make the solar panel more durable and reliable.
  • Multi-Panel Series: Great for 12-volt battery charging, multiple panels can be connected in series to charge 24-volt batteries. Best used with a controller to protect the battery, the included cable is compatible with the connector, and the solar panel can be easily connected to the solar controller/regulator..
Check Stock

2 Way Power Distribution Block, LAWUZA Connecting Block 0/2/4 Gauge in 4/8/10 Gauge Out Amp Ground Distributor for Auto Car Audio Splitter Amplifier

  • Heavy Duty: nickle plated brass thick busbar, base is made of heavy ABS material, mechanically strong, insulated, heat resistant and flame resistant, durable made for safety use..
  • Customized Design: 6 stainless M4 terminal screws, 2 x 1/4" (M6) socket head cap screws for easy installation and route your wires with minimal effort..
  • Operation: Max operating voltage 48V DC / 300V AC, Max continuous amperage: 150A AC / 200A DC..
  • Compatible: this brass battery bus bar junction block is widely used for car, vehicle, Rv, truck, marine and boat, audio, amplifier, video, also electrical equipment / appliances..
  • Package Includes: 1 pcs 6 terminals 4" power / ground distribution brass battery junction block bus bar with 6 screws and 2 cap screws, 2 pcs installation screws..
Check Stock

4 Post Power Distribution Block Bus Bar Pair with Cover - Made in The USA - 250 Amp Rating – Marine Bus Bar Automotive and Solar Wiring – Battery Terminal Distribution Block - Set of 2 3/8”

  • Ideal for Automotive, Solar and Marine Use - Our 250 AMP 4-post power distribution block busbar is ideal for automotive, car audio, solar, and marine use. Whether you need to consolidate, distribute, or protect your electrical system, our bus bars are excellent for managing wires and distributing power..
  • Includes Both Red and Black Connectors - With these 2 packs of 4 post power distribution blocks, you will have plenty of connection points for both positive and negative wiring terminals with 3/8" holes. The 4-way bus wiring block will make setting up your electrical systems quick, neat, and easy..
  • Anti-Corrosive & Even Consistent Flow - Our bus bars 12v are anti-corrosive and constructed to handle high currents. The nickel-plated brass contact plate ensures even and consistent flow and stability. Wire up to 4 accessories. Each bus bar terminal block includes a cover to protect connections from damage and corrosion..
  • Keep Your Wires Neatly Organized- With these power distribution blocks you can finally organize your wiring, so it doesn't look like a rat’s nest under the hood anymore. Use our power distribution bars for your car, truck, RV, boat, Yacht, Solar systems, and any other cable combination you can think of..
Check Stock

Recoil AFG12 Fuse Box 12-Way ATC/ATO Fuse Block with Negative Busbar, 12-Circuit Power & Ground Combo Block for Car RV Truck Boat UTV/ATV, Bolt Terminals, 24pcs Fuses, Screws Fuse Tool Sticker Labels

  • 12-circuit fuse block with negative busbar accepts ATO and ATC fast acting blade fuses.
  • Tin-plated copper buses and fuse clips for maximum power transfer.
  • Positive distribution bus with #10-32 studs. Accepts ring or snap fork type terminals.
  • Polycarbonate cover incorporates easy-to-open push button latch providing easy access to fuses.
  • 24pcs fuses, spare screws and fuse tool are included for easy replacement in field, include circuit sticker labels..
Check Stock

10 Way Blade Fuse Block with Ground Negative Bus bar for Automotive [ATC/ATO Blade Fuses] [100 Amp] [LED] [Protection Cover] [12V - 30V DC] Auto Marine Ground Terminal Fuse Box

  • STRENGTH WHERe IT COUNTS - Unlike other overpriced boxes, our fuse box focuses on what actually matters. Boasting tin plated copper components, a durable PC cover, and an incredibly strong PBT base, the only thing it's missing is a bloated price tag..
  • POWER WHEN IT'S NEEDED - A fuse box has one mission, sending power to your lights and accessories, and with a 100A total rating and a 30A rating for each individual fuse, this box gets it done..
  • PROBLEM, SOLVED - Is it fun trying to find a blown fuse at night in the middle of nowhere? NO! But with built in blown fuse indicators you can easily find failed fuses and get back on (or off) the road faster, just don't forget to bring extra fuses..
  • DOUBLE DOWN ON FUNCTION - Combining a fuse box and a negative busbar just makes sense. Your accessories get a clean, dedicated source for power and ground and you get two things for the price of one, that's what we call a win-win situation..
  • PAINLESS INSTALL - Running wires for new accessories is hard enough, your fuse box shouldn't add to the stress. Wire it to the battery, add your ATC or ATO blade fuses, plug in your accessories, and get back to your life. Yup, that's it..
Check Stock

JR Products GSNI-2300-150 Gas Spring

  • 150A Common BusBar with 10 screws and a cover (part number 2300).
  • Max voltage: 300V AC/ 48V DC, Continuous Rating: 130A AC/ 150A DC.
  • Terminal Screws: 10 x #8-32, Terminal Studs: 2 x 1/4"-20.
  • Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity and corrision resistance.
Check Stock