ReviewsPower Full Dc Motor

PWM DC Motor Speed Controller, DC10-55V/40A Max 60A Stepless DC Motor Speed Controller with Forward-Brake-Reverse Switch Adjustable Potentiometer and LED Display,Continuous Current 40A

  • 【Regulate Range】 Input supply voltage: DC 10V-55V.
  • Control frequency: 15KHZ.Please connect the DC power supply to use! Do not continue to use excessive load, the continuous current is 40A, and the peak value is 60A..
  • 【Switch Function】The PWM DC motor speed controller come with switch function. High power speed controller switch which is much more adaptable and conveniently change the motor direction..
  • 【Excellent Heat Dissipation Performance】 The enclosure of the speed controller for motor is an aluminum enclosure. Aluminum shell is very strong to prevent damage, holes on its side and top which are helpful for heat dissipation..
  • 【Easy to Operate】The stepless motor controller has a simple potentiometer knob adjusts the motor speed from 0% ~ 100% smoothly. And with LED display is accurate to show 0 ~ 100% of the motor speed. The input voltage of PWM motor speed controller should be equal to the rated voltage of the motor within 10-55V,or it will be burnt.Do not reverse the positive and negative poles！.
  • 【Application】 The dc motor driver can be used to brush motor speed regulation, light dimming regulation in the DC circuit.Note: The motor cannot be used in electric veh....
Check Stock

Speed Controller AC 50-220V 2000W 25A Motor Controller SCR High-power Electronic Voltage Regulator Module Motor LED Dimmers (1PCS)

  • The output voltage is adjusted anywhere between 50V-220V for use with electrical appliances.
  • It can use to such as electric stove, water heater tune thermal, lighting dimmer, small motor speed, electric iron thermostat, and achieve dimming, thermostats, pressure regulator effect..
  • The motor speed controller can easily provide a continuous current to your DC motor or other DC load..
  • Universal DC Motor Speed Controller.Control the speed of a DC motor with this controller..
  • Before you attempting to wire the controller, make sure all power is disconnected. Cut any one of the battle line or zero line of the lamp or electrical appliances, and connect wires refer to the "wiring diagram".
  • Turn on the power, and adjust the potentiometer..
Check Stock

Amarine Made DC 12V Farm & Ranch Solar Water Pump Submersible Well booster Pump 26ft Lift (Orange)

  • Model:ZQB-12,Size:10.83 x 7.1 x 7.1 inches,Voltage:DC 12V,Power:125W,Outlet Dia: 1"(25mm),Max Head:8m(26ft) ,Capacity:100L/min.
  • DC water pump is made of motor and pump,the motor is consists of rotor,bearing and base.
  • the pump body includes impeller,pump body,connections,bearing and mechanical seal..
  • This series pumps adopt stainless steel DC elect-motor,equipped with perfect electric protective device and waterproof seal..
  • 12V DC Submersible water pump is applicable to the same voltage power of ship or irrigation etc,it is very convenient..
  • Simple structure, less components, easy maintenance and repair.Stable Performance.
  • has less power cost, larger flow and great anti-corrosion ability..
Check Stock

High Speed Brushless DC Motor Kits 2000W 60V Electric Gokart Motor 4250RPM Rated Mid Motors with Controller Pedal Throttle for E-Scooter E-Bike Dirt Bike Motorcycle

  • Fundamental Parameters: This brushless go kart motor is powerful and efficient.Input Voltage: 72V DC, Output Power: 3000W, Rated Current: 43A, Rated Speed: 4900 RPM, Maximum Speed: 5800 RPM, Sprocket: T8F-11T, Maximum Current: 65A. Rated Torque: 6 N.m / 849.67 oz.in, Shaft Diameter: 0.47'' / 12 mm, Length (no Shaft): 5.31'' / 135 mm, Length (with Shaft): 6.3'' / 160 mm. Package includes: 1 x Brushless DC Motor, 1 x Controller, 1 x Multi-purpose Wrench, 1 x L-Shaped Wrench, 1 x Screw Set..
  • 3000W Brushless Motor: The dc electric go kart brushless motor adopts a 100% copper core for low noise operation and excellent speed regulating performance. The high-precision rotor features high-tech components, a clean finish for water resistance, and high working efficiency. Get ready to leave the competition in the dust..
  • Sturdy Aluminum Construction: The electric brushless dc motor kit features an aluminum alloy shell that resists heat, cold, and deformation, ensuring it will not rust easily. This dc electric motor is a forward and backward rotation motor so that you can switch rotation gears effortlessly..
  • Speed Controller Included: This dc electric motor brushless comes with a controller to provide speed control at a desirable range, speed adjustment method: Pot....
Check Stock

DEWALT Angle Grinder, Medium, 5-Inch, 5-Amp (DW831), Yellow

  • 12 amp AC/DC and 11,000 rpm motor of angle grinder provides high speed for fast material removal.
  • High power-to-weight ratio of the metal grinder is designed for greater efficiency and reduced user fatigue.
  • DEWALT angle grinder comes with adjustable guard that can be adjusted to redirect sparks away from user.
  • Rear handle design of the hand grinder is made for greater comfort and control.
  • Sealed ball and roller bearings for extended motor life.
  • 12.0 Amp AC/DC, 10,000 rpm motor provides high speed for fast material removal.
  • High power-to-weight ratio for greater efficiency and reduced user fatigue.
  • Keyless adjustable guard provides tool-free guard adjustments, increasing productivity.
  • Rear handle design for greater comfort and control.
  • External brush caps for easy servicing sealed ball and roller bearings for extended motor life.
Check Stock

10-50V 100A 5000W DC Motor Engine Speed Controller 0-100% PWM Control Industrial Motor Speed Regulator for DC Brush Motor DC Lamps

  • PWM Duty Cycle:0%-100% and Quiescent current is 0.04A( not over 40mA when voltage is DC10V to DC30V).
  • Operating temperature:-20 to 40.It can perform normally when the temperature is below 0.
  • Universal speed controller can be used for DC brush motor, suitable for car cooling fan motor, car air conditioning motor, exhaust blower, treadmill motor, etc.
  • This motor speed controller can also be used for dimming DC lamps or controlling DC heater.
Check Stock

12V Fan Controller, DROK DC Motor Speed Controller for Brush Motor 7V-60V 20A 420W PWM Driver Board Control 12V 24V 36V 48V Regulator Cooling Fan Dimmer Governor Pulse Width Modulator with Adjust Knob

  • Parameters --- Applicable voltage range: DC 7V-DC 60V, 60V is the highest operating voltage, please leave a margin for application. Control power: 12V within 200W.
  • Aluminum Shell --- Prevents the controller from easily damaged.
  • The holes in its sides and bottom makes it easier to be installed..
  • Stable Performance and Small Heating --- With the good materials of FR4 double panels, reasonable circuit management and fuse, the modulator works quite excellent..
  • LED Indicator and Power Supply Control --- The board equips with red LED power supply indicator which will light on when the module is power on. You can turn off power supply output by screwing the potentiometer..
  • NOTE --- 1. This product is a DC brushed motor speed controller. It needs to be equipped with a DC power supply to power the governor. It cannot be connected to AC power and cannot drive the brushless motor. 2. Before powering on the wiring, please read the wiring label, the positive and negative poles of input cannot be mistaken. The output connection to the motor does not need to be positive or negative. But if the direction of rotation is wrong, please change the two wires of the motor..
Check Stock

Onyehn 2Pcs 1.8v 3v 5v 6v 7.2v 12v 2A 30W Low Voltage DC Motor Speed Controller PWM 1803BK 1803B Adjustable Driver Switch 2 Pack

  • This Brand New 1803BK DC Motor Speed Controller allows controlling the direction of a DC the motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully the product adjust from 0%-100%..
  • With a self-recovery fuse 2A and a Power-On LED light..
  • This is a speed governor with a maximum current of 2A. If the continuous current is greater than 0.5A, the 775 motor and the stroller motor will not move. Don't buy it wrong. It is not recommended to supply power greater than 12V, such as 12V lead-acid batteries, which may cause damage to the governor.
  • If the current is too large, it will be automatically disconnected, and the fuse will automatically recover after cooling..
  • PWM DC motor speed controller with switch function..
Check Stock

YYQTGG Miniature Vibration Motor, Coreless Vibration Motor Sturdy Low Noise Professional for Beauty Instrument

  • ... of an aluminum alloy shell that withstand heat, cold, and deformation, ensuring it will not rust easily. This dc electric motor is a forward and backward rotation motor, so you can easily switch the rotating gear..
  • Basic Parameters: This brushless go kart motor is strong and efficient. Input Voltage: 48V DC, Output Power: 2000W, Rated Current: 34A, Rated Speed: 4300 RPM, Maximum Speed: 5400 RPM, Maximum Current: 42A, Sprocket: T8F-11T. Package includes: 1 x Brushless DC Motor, 1 x Controller, 1 x Multi- purpose Wrench, 1 x L-Shaped Wrench, 1 x Screw Set..
  • 2000W Brushless Motor: DC electric go kart brushless motor adopts 100% copper core, with low operating noise and excellent speed regulation performance. The high-precision rotor is made of high-tech components, with a glossy surface, waterproof and high efficiency. Get ready to let the race dust settle..
  • Speed Controller Included: This dc electric motor brushless is equipped with a controller, which can provide speed control within the ideal range. Speed adjustment method: Potentiometer. Model: BY15WF02-A, Current: 34A, Phase Degree: 120°, Conversion Efficiency: 90%, Under Voltage Protection Voltage: 41±0.5V..
  • Wide Application: The brushless motor is superior to the brushed motor because of its high ....
Check Stock

LGDehome 10PCS DC 5V-36V 15A(Max 30A) 400W Dual High-Power MOS Transistor Driving Controller Module FET Trigger Switch Drive Board 0-20KHz PWM Electronic Switch Control Board DC Motor Speed Controller

  • continuous current 15A at normal temperature.
  • The maximum current can reach 30A under auxiliary cooling conditions..
  • Trigger signal source: digital high and low level (DC3.3V--20V), can be connected to single-chip IO port, PLC interface, DC power supply, etc., can be connected to PWM signal, signal frequency 0--20KHZ support.
  • Adopt imported dual MOS parallel active output, lower internal resistance, large current, strong power, 15A, 400W at room temperature, meeting the needs of most equipment.
  • Application: The output can control high-power equipment, motor, bulb, LED strip, DC motor, micro pump, solenoid valve, etc. It can input PWM, control motor speed, lamp brightness, etc.
  • size: 1.34x0.7x0.5inch/3.4 x 1.7 x1.2cm(L*W*H).
Check Stock

Fromann 8.2 Feet Extension Cord Replacement Power Supply Cable for Okin Lift Chair or Power Recliner

  • 8.2ft Extension Power Cord Replacement works with Okin, Dewert, and Limoss Motors commonly found in Power Recliners.
  • 2 Pin Connection (one round, one flat) , 8.2 feet DC Output Extension Motor Cable.
  • Cable Connects between motor and power supply transformer(motor and transformer not included).
  • Compatible with many brand transformers with 2 Pin Connection (one round, one flat).
  • Used as an Extension DC Output Cable for the Lift Chairs or Power Recliner Transformer.
Check Stock