ReviewsPower Inductors

DC Power Supply 12V 50A AC 96V-240V Converter DC Adapter Universal Regulated Switching Power Supply 12Volt 600W LED Power Supply for LED Strip,CCTV, Radio, Computer Project(12V 50A 600W)

☞DC 12V 50A POWER SUPPLY – Input: AC 85~240 V Switchable.
Output: DC +12V (Adjustable±10%）50A ；Maximum Power：600Watts.
☞High-QUALITY RAW MATERRIALS – Pure Copper Inductors, High-performance Transformers, Dual-capacity Electrolytic Capacitors is The Guarantee of High-quality Power Supply.
☞MULTIPLE PROTECTION – With Over-voltage Protection, Overload Protection, Overheating Protection and Prevent Short Circuit.
☞TESTING & CERTIFICATION – This Power Supply is Finished After 48 Hours Burn-in , and Passed The CE and FCC Certification.
☞WIDELY USED – High quality Switch Power Supply Widely Used in LED Strip, LED Display, Audio Power Amplifier, LED Lighting, Light Box Billboard, etc..

Check Stock

LCR-T4 Mega328 Digital Transistor Tester Resistance Capacitance Diode Triode Capacitance Resistance ESR Meter MOS PNP NPN LCR with Case

Test ranges:Inductors, capacitors , diodes, dual diode , mos, transistor, SCR , the regulator, LED tube, ESR, Resistance, Adjustable potentiometer.
Can detect the transistor, MOSFET protection diode amplification coefficient and the base to determine the emitter transistor forward biased voltage..
High test speed, valid component test: 2 seconds (except in the larger capacitor of large capacitance measurement also takes a long time, the measured time of one minute is normal).
128*64 big Backlight LCD display,only 2mA when stand by..
Auto power off function to avoid unnecessary waste, saving battery power, improved battery life.

Check Stock

RioRand DMX512 LED Signal Splitter Amplifier Distributor 1 Way in 8-Channel 3-Pin Output with Signal Indicator

DMX512 signal amplification function and prolong the DMX signal transmission distance.
DMX512 signal distribution function, multi-level sharing after a DMX control system.
Separate inductors power cable, independent DMX signal ground, the standard DMX independent distribution amplifier.
Eight independent isolated output function, to avoid the system after the class DMX signal interference and sabotageOne input, eight independent DMX signal amplifier output.

Check Stock

Schiit Loki Mini+ 4-Band Tone Control Equalizer Black

Loki Mini+ transforms your system without getting in the way, or making itself known. Uses a single, discrete, current-feedback gain stage, coupled to....
Loki Mini+ helps you adjust for imperfections and/or tune your system to the way you want it to sound. Bands: 20Hz, 400Hz, 2kHz, 8kHz. Adjustment:....
Includes a USA power adapter intended for use ONLY in countries with 115VAC wall voltage such as the United States, Canada, and Mexico. Adapter will....
Loki Mini+ uses LC filtering for very low hiss, but the inductors may pick up hum from other electronics. If you run into hum problems, move Loki....

Check Stock

Schiit Loki Mini+ 4-Band Tone Control Equalizer Silver

Loki Mini+ transforms your system without getting in the way, or making itself known. Uses a single, discrete, current-feedback gain stage, coupled to....
Loki Mini+ helps you adjust for imperfections and/or tune your system to the way you want it to sound. Bands: 20Hz, 400Hz, 2kHz, 8kHz. Adjustment:....
Includes a USA power adapter intended for use ONLY in countries with 115VAC wall voltage such as the United States, Canada, and Mexico. Adapter will....
Loki Mini+ uses LC filtering for very low hiss, but the inductors may pick up hum from other electronics. If you run into hum problems, move Loki....

Check Stock

Mega Electronic Component Kit Assortment, Capacitors, Resistors, LED, Transistors, Diodes, 1n270 Germanium, DC Jacks, opamp, PCB, Speaker, 1900 pcs

【Small Vertical Inductive】 Small Vertical Inductors Occupy Less Space..
【Performance Stability】 The Inductor Coil Is Protected with PVC or UL Tube To Ensure Stable Performance..
【Feature】 this Choke Inductor Has Special Guide Pin Structure.
Not easy to produce open circuit phenomenon..
【Specification】 1uh to 220uh 1MH to 20MH.
The Choke Coil Inductors Arefi SMALL Distributed Capacits And High Self-Resonance Frequency..
【Include】 10UH, 100UH, 220UH, 1UH, 4.7UH, 15UH, 33UH, 150UH, 1MH, 2.7MH, 10MH, 20MH, 10UH, 1MH, 10MH.

Check Stock

MartinLogan ElectroMotion ESL Electrostatic Floorstanding Loudspeaker - Each (Gloss Black)

High frequency transducer: XStat CLS electrostatic transducer.
Low frequency driver : 8" high excursion, high-rigidity doped fiber cone with extended throw drive assembly, non-resonance asymmetrical chamber format.
MicroPerf panel is housed within a radical aluminum and composite AirFrame.
129 square inches of sound radiating surface on both the front and back.
Proprietary Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
Frequency response: 42 - 22,000 Hz ±3 dB, Sensitivity: 91 dB/2.83 volts/meter.
Recommended amplifier power: 20-300 watts per channel.
Dimensions: 52.1" high, 9" wide, 16.3" deep.

Check Stock

CT Sounds AT-60.4AB 420 Watt Class AB Competition 4 Channel Car Amplifier

Equipped with a Diode 6A60 for reverse polarity protection along with a 4-way protection circuitry.
sleep easy at night knowing your 4ch car audio amplifier is protected.
Built using an advanced PCB board featuring industry-leading capacitors, high quality transformers and cutting-edge inductors to ensure this 4ch car amplifier delivers the power you need to destroy the competition in the SPL lanes.
LED logo, plexiglass bottom, and reinforced tiffany style RCAs gives this car stereo amplifier a prestigious look that is guaranteed to turn heads.
Heavy duty heat sink design, high power MOSFET switching technology, and best in class internal components will ensure the amplifier for car speakers runs cool for even the most demanding playlists.
4 channel amplifier car audio rated 75W @ 4-ohm x 4-ch (14.4v).

Check Stock

MartinLogan Motion SLM X3 Ultra-Slim 3-Channel Passive Soundbar - Black

L-C-R soundbar, Slim design, Binding Posts: Push style.
High Frequency Driver: Three 1" x 1.4" Folded Motion Transducers with 5.25" x 1.75" diaphragm.
Low Frequency Drivers: Six 4" paper cone, sealed cabinet.
Components: Custom air core coil inductors, polyester film capacitors in series and low DF electrolytic capacitors in parallel, overall system thermal/current protection.
Frequency Response: 120–23,000 Hz ± 3 dB.
Dispersion: 80° x 80°, Sensitivity: 93 dB @ 2.83 volts/ meter.
Impedance: 4 Ohms. Compatible with 4, 6 or 8 Ohm rated amplifiers..
Crossover Frequency: 3,000 Hz (2-way design), Recommended Amplifier Power: 20–140 watts.
Dimensions with wall bracket (HxWxD): 6.3" x 48" x 2".

Check Stock

CT Sounds ATv2-125.4D 4-Channel 800-Watt Class D Competition Car Amplifier

4 channel amplifier car audio rated 125W @ 4-ohm x 4-ch (14.4v).
Built using an advanced PCB board featuring industry-leading capacitors, high quality transformers and cutting-edge inductors to ensure this 4-channel car amplifier delivers the power you need to destroy the competition in the SPL lanes.
LED logo, plexiglass bottom, and reinforced tiffany style RCAs gives this car stereo amplifier a prestigious look that is guaranteed to turn heads.
Heavy duty heat sink design, high power MOSFET switching technology, and best in class internal components will ensure the car amplifier runs cool for even the most demanding playlists.
Equipped with a Diode 6A60 for reverse polarity protection along with a 4-way protection circuitry.
sleep easy at night knowing your 4ch car audio amplifier is protected.

Check Stock

(2) JBL JRX225 Dual 15\ Professional 4000w Passive DJ/PA Speakers 4 Ohm JRX 225

... JRX225 Dual 15" 2000 Watt Passive DJ/PA Speaker. Dual JBI low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil for greater efficiency and power handling. JBI 2414H-C 25 mm (1 in) polymer diaphragm compression driver.
Advanced network topology crossover design. High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure.
SonicGuard protects the high frequency driver from excess power without interrupting the performance. Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Details: Power Rating : 500 W / 2000 W.
Frequency Range (-10 dB) : 42 Hz - 18 kHz. Frequency Response (3 dB) : 62 Hz - 13 kHz. Sensitivity (1w/1m) : 100 dB SPL. Nominal Impedance : 4 ohms. Recommended Amplifier Power : 500 W to 1000 W into 4 ohms. Maximum SPL : 133 dB. Nominal Dispersion : 90 x 50. Crossover Frequency : 2.2 kHz.
Dimensions (H x W x D) : 1092 mm x 464 mm x 432 mm (43 in x 18.3 in x 17 in). Weight : 42.6 kg (94 lb). High Frequency Driver : JBI 2414H-C , 1" exit compression driver mounted on Progressive Transition Waveguide. Low Frequency Dr....

Check Stock