ReviewsPower Isolation

JTS CX-508 Instrument Condenser Microphone, Cardioid

• Rotationally symmetric cardioid polar pattern.
• Electret condenser microphone with self contained electronics eliminating the need for an external power module.
• JTS rubberized isolation componentry assure super low handling noise and mechanical isolation.

iFi iDefender+ USB Audio Ground Loop Eliminator Type A > A

Current Transmitter Current Transducer Transmitter Transformer Sensor AC Current Converter 0-50A

• Mutual inductance current monitoring, high current detection accuracy, stable performance, safe isolation of input and output..
• The measured current of this current transmitter is AC 0-10A/20A/50A.
• The output signal of this current transducer is DC: 0‑5V/0‑10V/4‑20mA 3 forms are optional..
• With strong overload capacity, high accuracy, high isolation, high safety, low power consumption.
• through‑core structure design, isolation withstand voltage up to 2000VAC.
• hysteresis less than 1%, can be used under strong magnetic field conditions..
• The shell is made of self-extinguishing material ABS.
• it is easy to install and use, and there is no need to connect DC in series in the circuit when measuring..

Loulensy AC Voltage Transducer Voltage Sensor Transmitter Transformer Input 0-300V AC Output 0-5V DC

• Working Stability: annual change 003c 0.2%.
• Impulse Voltage:5KV(peak value),1.2/50uS.
• Load Capacity: 2 times current continuous.
• Storage Environment:-40 to +115 degress Centigrade,20%-95% without condensation.
• Isolation Withstanding Voltage:AC 2.0KV/min*1mA between input/output/power.
• Power Supply(defaulted):24V DC +/-15% (If 15V or 12V needed,please leave a message).
• Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting.
• Working Environment:-25 to 80 degrees Centigrade,20%-90% without condensation.
• Isolation Resistance:20M Ohm(DC500V) or above.
• Capacity Max:0-500V AC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).

Loulensy AC Voltage Transducer Voltage Sensor Transmitter Transformer Input 0-400V AC Output 0-5V DC

• Working Stability: annual change 003c 0.2%.
• Impulse Voltage:5KV(peak value),1.2/50uS.
• Load Capacity: 2 times current continuous.
• Storage Environment:-40 to +70 degress Centigrade,20%-95% without condensation.
• Isolation Withstanding Voltage:AC 2.0KV/min*1mA between input/output/power.
• Power Supply(defaulted):24V DC +/-15% (If 15V or 12V needed,please leave a message).
• Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting.
• Working Environment:-10 to 50 degrees Centigrade,20%-90% without condensation.
• Isolation Resistance:20M Ohm(DC500V) or above.
• Capacity Max:0-500V AC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).

Senva C-2343 : Current Transducer 0-5VDC Output

• Self-powered, no external power supply required..
• Easy to install and use, no need to connect DC into the circuit when measuring..
• Mutual inductance current monitoring has high current detection accuracy and safe isolation of input and output..
• Straight- through structure design, isolation withstand voltage up to 2000V..
• Measured current AC 0-10/20/50A, output signal DC 0-10V..

Shuian 10 Pcs 3V Relay Power Switch Board, Songhe DC 1 Channel Optocoupler Relay, High Level Trigger for IOT ESP8266 Development Board.

• The 3v Relay 1 Channel power switch module compatible with 10A 250VAC and 10A 30VDC load.4pcs * 2.5 mm Fixed Bolt Hole..
• 3V/3.3V power relay module supports photocoupler isolation control and dual power supply input ensure high anti-interference ability. Fast response time less than 20ms and long life time up to 100,000 times snap action with diode freewheel protection..
• Equiped with high-current relay, AC250V 10A.
• DC30V 10A,each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
• Support dual power supply input ensure high anti-interference ability,high reliability of photoelectric isolation protection,The external connection uses the rotary crimping terminal, causes the wiring to be more solid..
• You are free to select whether the relay and the signal share the same power supply or not by removing the jumper caps on the pins or not. It is recommended to share the same power supply, because that is more convenient for using..

Loulensy AC Voltage Transducer Voltage Sensor Transmitter Transformer Input 0-150V AC Output 4-20mA DC

• Working Stability: annual change 003c 0.2%.
• Impulse Voltage:5KV(peak value),1.2/50uS.
• Load Capacity: 2 times current continuous.
• Storage Environment:-40 to +70 degress Centigrade,20%-95% without condensation.
• Isolation Withstanding Voltage:AC 2.0KV/min*1mA between input/output/power.
• Power Supply(defaulted):24V DC +/-15% (If 15V or 12V needed,please leave a message).
• Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting.
• Working Environment:-10 to 50 degrees Centigrade,20%-90% without condensation.
• Isolation Resistance:20M Ohm(DC500V) or above.
• Capacity Max:0-500V AC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).

2902832, Frequency transducer, F Input: 0.002Hz-20kHz, Out: V/I, Screw Conn, Mini MCR-SL-F-UI-NC

• -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
• Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler detection in imaging.
• 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
• Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
• Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.

Miller 191941 Transducer, Current 200A Module Supply V +/- 15V

• Straight-through structure design, isolation withstand voltage up to 2000V..
• Mutual inductance current monitoring has high current detection accuracy and safe isolation of input and output..
• Self-powered, no external power supply required..
• Measured current AC 0-10/20/50A, output signal DC 0-5V..
• Easy to install and use, no need to connect DC into the circuit when measuring..

Mixer Module, 0.1‑500MHz Conversion Board High Frequency Transducer -10dBm for HF VHF Receiver for Quadrature Modulation for Base Station

• -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
• Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler detection in imaging.
• Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
• 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
• Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.